Capacity of AV cable AVC-DC400

Similar Questions

• the easiest way to copy entire disc of C, new drive system

  Have the new computer, want to copy existing info drive c to the new computer. Also have the new eternal hard drive to use. An old simple copy and paste again Dr. external would work better? Or y at - it an easier way to do and lose any data?

  Hello Ricknite,

  You can consider using one of the following methods to transfer your data to a new computer:
  -Network connection
  -Removable media (such as a USB key or external hard drive)
  -CD or DVD (be sure it has sufficient storage capacity)
  -USB transfer cable

  You have installed all programs will need to be reinstalled on your new computer, that they will have to connect to the reigstry and you cannot copy such information.

  Thank you

• SHC68-68-EPM cable capacity

  Hello

  Anyone know what's the capacity of cable to the SHC68-68-EPM cable?

  Thank you

  Nick

  Hi Nick,

  This cable has three internal cables, as in the following diagram:

  

  The mutual capacity for cable has 75pF and mutual capacity for cables B and C is 47.6pF. Please let me know if that answers your question.

  Have a great day!

  Kind regards

  Jackie B

• iPhone 6s more battery capacity < 90% after 4 months

  If the image below got me concerned enough to my phone. My battery capacity has fallen by 10% over the past 4 months, that would mean in the next four months, I'll be below the 80% that Apple sets for a track of 2 years. Should I pop to the store right now to get the snippet or they will decrease just my complaint?

  Other people with the same problem?

  

  First of all, where do you have this image of the screen of?  I wonder about the accuracy of the information.

  In any case use the iPhone until it automatically stops.  Ignore any alerts that may appear.  Then charge it overnight using the charger and cable provided with the iPhone.  Finally, check your ability.

• External hard drive (Seagate) not readable after the ejection using Thunderbolt cable

  Not sure where this question fits as this seems to be a Thunderbolt cable problem but here goes...

  I have 4 TB Seagate Backup Plus external drives for archiving with two drives - backup A and B backup - and two interfaces, a basis of love at first sight and a standard basis of USB3.

  Using the basis of love at first sight that I backed up to 1.5 TB of data on a Mac logged to A disk and ejected from backup format. When I reassembled A backup to verify the data Finder says the drive is not a recognizable car and I had to reformat. I thought that I must have crashed head or something like the disc was still running when I pulled it off the base of love at first sight. When I got tired to reformat the drive in disk utility only 500 GB of the 4TB were available for formatting, so I thought that I've certainly got to have damaged it.

  Then I saved my 1.5 TB of data to a second drive Seagate Backup Plus (backup B) but when I eject this drive (this time I waited to stop and pulled the power over the base before you remove the disk) and then lift the drive that the same error came in the Finder. Suspecting it was the Thunderbolt interface I swapped backup to the base of the USB3 B and all the data is there! I checked A backup and even if she had to be reformatted this time all the 4 TB of capacity was available.

  I also have a Rugged Lacie 2 TB drive with a Firewire interface and it seems to work just fine so maybe the Thunderbolt Apple cable or Seagate sight base. I don't have a second Thunderbolt cable to test with at the moment.

  As a secondary issue readers are not run down after eject either. The heads are parked, but readers continue so I have to pull the power and wait that it happen down before I can remove basic USB3 disks or love at first sight. This problem, even if it's embarrassing, I can live with. In the foreseeable future I'll use the basis of the USB3.

  Everyone knows about this problem before? It sounds really weird.

  I can only give you my opinion of WD boxes and I'm afraid that's not good. My experience with WD boxes have always been bad. My suggestion is to try another TB cable and see if that's it, if not then try to connect another device to your iMac Thunderbolt and test to see if it is the iMac, which I doubt it is. If this isn't the cable or the iMac, then you know that it's the condom. If the disks are recoverable from the speaker, remove them and get a TB of high-quality speaker. My vote goes to OWC (www.macworld.com) pregnant Thunderbolt.

• iPhone 6 s is not wake up when you remove the cable from the charger.

  Hi all.

  I noticed that sometimes my iPhone didn't wake not (the lock screen display) when the charging cable is removed. the charger / sync port seem otherwise works normally.

  Is this normal?  I'm guessing that this happens because sometimes when the battery is fully charged, no power goes to the phone and if you pull the cable then, the phone can't tell you have removed the cable, but I have not seen this happen on my previous phones.

  Thank you!

  Yes, this sounds like normal behavior! On my iPhone 6, when it reached 100% of their capacity and is completely loaded, as it stops in charge, which is why when you unplug the iPhone from the charger the screen does not automatically wake up, because the charger stopped output power to the iPhone when it finished filling. I hope that answers your question!

• 6B55DX dv7: what cabling needed to connect the second HD

  I would like to add a 2nd hard drive, but although there is an empty Bay, there is no wiring.  My questions:

  1. What are the numbers of the part for the wiring needed?
  2. Are there other necessary parts such as clamps, cages, etc. ?
  3. Where can I get these parts?
  4. Is there anything else I need to know on the subject of bringing the HD after installation?

  I intend using the extra drive for extra storage; I won't start him.

  This is the cable you need:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=379

  The dv7-6000 series was supposed to be supplied with the box hard drive, but no cable or screw. If you do not have the caddy (also called sled or cage) then you will need to find one of those too

  http://www.eBay.com/ITM/665597-001-genuine-original-HP-hard-drive-caddy-second-dv7-6c-series-/291671518946?hash=item43e8fa2ee2:g:dkAAAOSwGotWqUHQ

  You do this right. A hard drive in secondary Bay can be initiated, but makes a great place for additional storage capacity.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Half of the audio is missing. After having inserted the wrong cable.

  More than 50% of the audio disappeared right before my recording session. I plugged in (line in) the wrong cable. giving the huge volume of pc. The noise rose for a moment. And lowered at half capacity. I checked everything (I could) and everything that seams to work fine. The worst is that I have NEED of THE VOLUME! Since then, I was in the middle of doing some recordings...

  Vista 32
  Realtek HD audio driver 6.0.1. 5377
  You ' r help is much appreciated...

  Hi lucid-dreamer,

  Are what cable you referring?

  You can try the following steps and check if it works.

  Increase the volume of the sound recorded and then try to record the sound again. To adjust the audio volume recorded, follow these steps:

  1. click on Start, click Control Panel, click hardware and sound, then manage audio devices.

  2. click on the recording tab, click the audio device you use to record sound, and then click on Properties.

  3. click the levels tab, do drag the volume slider to the right to increase the volume, and then click on OK.

  4. start Sound Recorder and record the sound again.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  When you use the tape recorder to record audio in Windows Vista, the audio recorded may contain persistent organic pollutants, clicks or other distortions

  http://support.Microsoft.com/kb/936693

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Diagnosis copper wire test on SG200-26 Gigabit Switch - what is the "open cable" telling me?

  I have installed a Switch Cisco's Gigabit SG200-26 to the installation of the client.  They have a severe latency on their network, so I was hoping the switches capacity could help me track down the problem with the statement.  There are 7 computers in white box on the switch.  Six computers have been sold at the same time and have the same motherboard.  A computer seventh was sold a few years later, and has a different motherboard.  All computers have the NETWORK card on the motherboard.  All seven computers come with ' Open Cable - cable is connected on one side "when the analysis of the copper is run under the Diagnostics tab.  Each test has an inclination of NS 8 pairs at least three reports four sons.  A router, server Dell, Cisco wireless router, used only as a point of access, an old computer (about 10 years) and a small Netgear switch good show all in the analysis of copper.  Each node is except the switch Netgear gigabit speed and the old computer.  None of the ports that are attached to the computers display errors.

  Thinking that maybe the wiring of the installation is all bad, I took a computer to the switch and connected a connecting cable of known network and in a good 5' from the computer to the SG200-26 Gigabit Cisco Switch and then I did a test of copper.  The results were the same - "Open Cable - cable is connected on one side.

  I am completely confused by all this.  First of all, what exactly does "Open Cable - cable is connected on one side?  These computers can access the Internet and the server and sometimes seem to have hours of access to resources, so I know both ends of the cable are connected.  And what is the inclination was trying to tell me?  Is it possible that all 7 computers, which are Windows 7 32-bit and a couple of 64-bit operating systems have a driver problem?

  Help here would be most appreciated.

  Hi txlmbardi_2,

  This really should not conduct so please open ticket with Cisco Small Business Support team to deepen this review:

  http://www.Cisco.com/c/en/us/support/Web/TSD-Cisco-small-business-suppor...

  Kind regards

  Aleksandra

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• Apple TV with no cable?

  If I disconnect the cable tv, Apple TV will work?

  No. a HDMI cable is necessary and one internet connection.

• IPhone 64 GB 6s shows only 12 GB total capacity

  I just got a new iPhone 64 GB 6 s last week. However, when I look at the about section in settings, it says that the total capacity is only 12 GB. I checked the product description to ensure it is listed as 64 GB and checked the model number that evokes as a 64 GB. Any ideas as to how this can be corrected? I reset all my settings, but that has not changed anything.

  Have you tried to plug into iTunes to see what is reported here? This total power is what you would find on a 16 GB device. Restore you this device from a backup of an old device? When you say that you have received a new device, it is an alternative service, or ordered a new from somewhere?

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• QuickTime Cale / codec AVC

  Hello

  QuickTime crashes when you try to open a video file of 4 k with codec AVC.

  I force-quit QT, but every time that I re - open, that regularly hold QT file again and again.

  QT makes it unusable.

  How can I remove this file from QT?

  TIA for any help,

  rdmaxx

  MacBook 2.4 GHz Intel Core Duo, OSX QuickTime 10.1 10.7.5, (player, not Pro)

  Force quit, and then restart QuickTime while holding down the SHIFT key.

• do not connect not lightning cable

  All cable brightening, Apple or others, I use to connect to my iPhone 6, I have to move the insert head into the receptacle of the iPhone so he could load, usually push it again.  He then releases and I push it again to connect to the load or on my Mac.  Is this a defect in the receptacle for iPhone 6plus or are there other reasons?

  Thank you

  Stuart

  Hello

  Follow the steps here, including check for any debris loading port and/or contact our Apple support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't charge - Apple Support