Capacity Planner Question - error messages from Collection

Similar Questions

• Msinfo32.exe generates an Error Message "cannot collect information.

  Hello

  I am running XP Prof with SP3 and made a scan with the perfect system optimizer and it did remove a lot of files he said were copies and since then, Information System says that it can collect Information, cannot access windows management instrumentation software. Windows Management files may have been moved or missing. I tried to use the administrative tools in the Management Console Microsoft and add snap - in following the instructions from microsoft on their site, but still did not help. Also tried to restore as soon as possible and the recovery of deleted files from the optimizer software. Nothing has helped so far. I am also on a network with my laptop which runs on Windows 7, but the have not enabled since I stupidly paid 39.99 for this software now appeasrs to have screwed up my computer. Restoration did do 1 restore and I tried 5 times and it said could not files to an earlier time which is an another prolbem I've had for a while with system restore doesn't work does not correctly. If anyone can help me I would really appericiate it. Thank you my friends.

  PKBISHOP

  Hi PKBISHOP,
   
  The error message occurs if the Windows Management Instrumentation (WMI) service is not started. This can happen if the service is disabled, if a dependent service is not started, or if a problem is preventing start the WMI service. The system information utility will be able to collect information that the WMI service is started.
   
  To correct this information to resolve this problem, see the link below.
   
  Msinfo32.exe generates an Error Message "cannot collect information.

• error message from Windows media player C00D0FEA

  What is the error message from windows media player C00D0FEA and how to fix it?

  Hi blaque007,

  (1) when exactly you get this error message?

  (2) since when are you facing this problem?

  Please quote the complete error message you receive.

  C00D0FEA: this error may have been triggered by an error in another program or a component of Windows.

  See the link below

  C00D0FEA

  Method 1: You can check the link below that relates to a similar question

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/1bb18155-1614-4ad6-9e78-90bcd08deb0a

  You can see the link below for more information:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• How to display the error messages from sql/pls call

  Hello

  How can I display error messages from pl/sql calls on application pages?

  Current situation:

  If I specify "Error message" in the process - well, that's what I'm going to get on the page.

  What I want:

  I would like to have the specified aka "user friendly" message with the actual pl/sql routine. so it helps me to understand where the error occurred.

  Hi AZZ.

  AZZ says:

  How can I display error messages from pl/sql calls on application pages?

  Current situation:

  If I specify "Error message" in the process - well, that's what I'm going to get on the page.

  What I want:

  I would like to have the specified aka "user friendly" message with the actual pl/sql routine. so it helps me to understand where the error occurred.

  Yes, agree with orpheus4192. Use the APEX_ERROR. ADD_ERROR API.

  Reference:

  • Re: Re: error in the processing of the page management
  • https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_error.htm#AEAPI2217 (APEX 5.0)
  • http://docs.Oracle.com/CD/E37097_01/doc.42/e35127/apex_error.htm#AEAPI2217 (APEX 4.2)

  Kind regards

  Kiran

• error messages from Windows vista backup company

  I just got a laptop with Vista Business replacement and no system disk.  I downloaded and installed all of the 200 + windows vista updates including Service pack 2.  Now I'm doing a system recovery on DVD disks before starting the arduous task of reinstalling all my programs and data files, but I keep receiving the error message 0 x 80780119 not enough disk space to create the volume shadow copy on the storage location... and storage 0x8004231F insufficient to create either storage copy shadow file or other shadow copy data.

  Following the advice I found on another forum of Vista, I resized memory Ghost by using this command, vssadmin Resize ShadowStorage / For = C: / On = C: / MaxSize = 30 GB, who apparently has apparently solved this problem for others, but does not work for me.

  I try next? Be explicit because I'm not very familiar with this flavor of operating system Windows.

  
  

  Hello

  You can make recovery disc to factory settings from recovery partition from the manufacturer to back to factory settings

  Ask them how

  ___________________________________________________________

  see if this information helps you to make a backup complete PC Vista, as you have Vista Business

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  ___________________________________________________________________

  and as you say that no disk not supplied with your laptop, read this;

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Error messages from Windows Live Movie Maker Movie

  I am trying to create a movie using the new installed Windows Live movie maker and I'm able to import fine film scenes. However, when I try to change them at times, he's very well but then on other times it displays an error message saying that Windows cannot save movie file because the movie you may be corrupted or it film ake cannot determine Ann that the file was created. It displays an error message like a triangle with an exclamation point. It will do this at random whenever I start my project and sometimes it's the same movie and other times it's a different movie. When she did this, I simply save the file and close it movie maker, then re-open the Director and then reopen the file. I record movies from a camera, sharper Image with the .avi file extension which is a supported file type, so I don't know what is the cause. Maybe I need to rename the files as the Director does not recognize it by a unique name? If anyone has answers on this it would be greatly appreciated because I really want to complete this film I have all the scenes in it of just a matter of change them.

  Hello Phoenix27,

  Since your question deals with Windows Live Movie Maker, it is best to post in the forum created for the Windows Live products.
  Click here for a link to the Windows Live Help forum. They have experts who will be able to solve the problem you are experiencing.

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sometimes web error message from the client / popup that lies behind the HTML view

  Hello

  At times the web client error / popup hiding behind making the full background grey out and highlighting HTML display the HTML view. At this stage the actions behind the HTML code / above the screen HTML is not clickable, which forces the user to refresh the entire page (in case of a popup). Please find attached the screenshots. I tried to find if it is a known problem, but found no references linked to this document from VMware. Can someone please tell me, if there is no work around for this problem.

  Details of the environment:

  • Browser: Google Chrome (latest version)
  • OS: Windows 2007 and 2 k 8
  • vCenter: 6.0

  
  

  Steps to reproduce:

  • Open an extension point that contains the HTML content.
  • Leave it for awhile until the point the web client session, timeout occurs (or) to disable the WebClient service / vcenter server service (Note: this one is not always reproducible.)
  • Try to perform some action less content, it will display the html error message / see the popup behind the html code.
    

  
  

  The problem of popups being hidden behind an HTML view is fixed in version 6.0.1 which was released on 10 September.

  Same question as indicated previously here: problem with IFrame based HTML hosting inside Flex views

• error message from the invention of user required on printer hp2510

  For the last few days whenever I try to print to the printer from hp2510 I always an error of the necessary user input, how can I get get this error for good. I am currently using Windows 7.i some scanned documents

  a few days before this error occurred, this could be the reason? Thank you.

  Gwendoline

  Hi @kinggc,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem with your HP Deskjet 2510 printer and get an error message on your Windows 7 computer. Here is a link to the HP print and Scan doctor. Printing HP and doctor Scan will run a check of your system and your printer.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source because they can be a problem.

  Can make you a copy of something ok on the printer?

  Please let me know if you do this wired or wireless.

  I hope this helps.

  Thank you.

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Received a phone call from someone who said he could help me because his company had received the error messages from my computer - XINFINITY?

  So I recently received calls from this guy who claims to be with Microsoft Error Reporting service, but I thought something was fishy when he couldn't tell me anything specific on my computer, which he would be able to know right away. Also, he couldn't speak a lick of English, which makes it really difficult to understand what he wanted originally.
  He told me that he and his 'business' received my computer error messages, and that we should "follow the simple steps to get rid of these problems.
  He told me to go to the computer management console and find the 'filter' in the display options, but being an avid user of XP, I know there is no such thing.
  He then told me that it is an effect of a virus that "we need to follow the steps to get rid of. He directed me to the console to Run and had me type in this web address:
  'www.XINFINITY.WEBS.com '.
  So now, things get sketchy. A free host for a supposedly serious company? I do NOT.
  (Why he wanted me to use RUN to access a Web site, I have no idea, only adds to the superficiality...)
  I went on the site, which lo & behold, very professional. There are four links to download files .exe with weird as names:
  -' Ammyy v3"(AA_v3.exe)
  -' Ammyy v2"(AA_v2.exe)
  -"Croosloop" (CroosLoopSetup.exe)
  - and 'ShowMyPc"(ShowMyPC3105.exe)

  He said click on the first and hit. He said SAVE or CANCEL. Now, I'm not naïve or stupid or gullible, and I am computer illiterate.
  I smell something fishy here. Technical support does not call you about errors, you call them.
  Research in the comments left on their FREE site, I have seen that all FOUR were short and had similar spelling/grammar mistakes. Typical supported false reputation.
  I did a google search, barely found anything on this "business" and the guy hung up.
  This is the site that this guy directed me to: http://xinfinitytech.webs.com/quick-help/
  IM asking for any information about whether if it's a scam, an attempted theft of identity/data theft, an attempt to spread of the most recent virus, or some guy who tries to help. My gut tells me that it is one of the top three.
  ANY INFORMATION WOULD BE GREATLY APPRECIATED!

  So I recently received calls from this guy who claims to be with Microsoft Error Reporting service, but I thought something was fishy when he couldn't tell me anything specific on my computer, which he would be able to know right away. Also, he couldn't speak a lick of English, which makes it really difficult to understand what he wanted originally.
  He told me that he and his 'business' received my computer error messages, and that we should "follow the simple steps to get rid of these problems.
  He told me to go to the computer management console and find the 'filter' in the display options, but being an avid user of XP, I know there is no such thing.
  He then told me that it is an effect of a virus that "we need to follow the steps to get rid of. He directed me to the console to Run and had me type in this web address:
  'www.XINFINITY.WEBS.com '.
  So now, things get sketchy. A free host for a supposedly serious company? I do NOT.
  (Why he wanted me to use RUN to access a Web site, I have no idea, only adds to the superficiality...)
  I went on the site, which lo & behold, very professional. There are four links to download files .exe with weird as names:
  -' Ammyy v3"(AA_v3.exe)
  -' Ammyy v2"(AA_v2.exe)
  -"Croosloop" (CroosLoopSetup.exe)
  - and 'ShowMyPc"(ShowMyPC3105.exe)

  He said click on the first and hit. He said SAVE or CANCEL. Now, I'm not naïve or stupid or gullible, and I am computer illiterate.
  I smell something fishy here. Technical support does not call you about errors, you call them.

  
  Research in the comments left on their FREE site, I have seen that all FOUR were short and had similar spelling/grammar mistakes. Typical supported false reputation.
  I did a google search, barely found anything on this "business" and the guy hung up.
  This is the site that this guy directed me to: http://xinfinitytech.webs.com/quick-help/
  IM asking for any information about whether if it's a scam, an attempted theft of identity/data theft, an attempt to spread of the most recent virus, or some guy who tries to help. My gut tells me that it is one of the top three.
  ANY INFORMATION WOULD BE GREATLY APPRECIATED!

  You search here and in the rest of the Internet first?  I suggest that - because this type of scam is not only well known but well published.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

• How can I remove an old error message from an account that no longer exists?

  I deleted an outlook e-mail account express and put a new e-mail account, but now I get an error message on the account of fist and I don't know how to get rid of it please help me!

  Go to shipping and the view box. Current view | Show all messages and make sure that there is no message there.  Delete all if there is.  Then go to tools | Accounts and are looking for the old account and highlight and select Remove.  Then see if that solves it.  If not, try to go to file | Identities and setup a new identity.  This will give you a new message store and you can add to your new account there and when it works, use file | Import | Messages to bring them from the old identity.

  Steve

• Pavilion tx1410us - error messages from the BIOS disk Test

  My first post here so greetings and a happy new year to all.

  I have a Pavilion tx1410us who seems to have a hard drive problem. I have Vista (Partition 2 - 60 2 GB as/dev/sda2) and Ubuntu 10.10 64-bit (1-1 St 20 GB as/dev/sda1 Partition) on the first partition and am getting ATA DMA error messages 2 and on the console when running Ubuntu.

  When I had Vista on the first part of the disc I was getting a lot of errors on Vista.

  I ran check disk for bad blocks, but several seem to be coming.

  Last night I ran the test of the drive from the BIOS twice and twice got them the same "Test #2-07 failure" error message. The text is perhaps not quite correct, but the "#2-07" is certainly.

  Does anyone have a reference to what the BIOS messages mean?

  With the errors appear to come from the same part of the disk that would lead me to believe that it's the hard drive itself which is a failure, but I want to be sure that it is not the disk controller until I get a new hard drive.

  It was close in the past, but we are now very careful to use only on a surface hard and keep the vents unblocked so I think I can have escaped heating problems that seem to dog these machines.

  If someone is under Linux, you can install the monitor CPU cmdlets and the temperature of the system that can sit on your desktop and show you the temperatures constantly. Very useful. Interesting to see the speed at which the processor gets hot when editing or video processing.

  Thanks in advance for any help.

  Andy

  Hi Andy,.

  The error message definetely is hard even though I'm not sure what #2 refers to other it can tell the difference between the short and complete test.  This, and the fact that more unusable blocks are appearing constantly in all point to the failure of the HARD drive.

  Best wishes

  DP - K

• When Remove My Documents & send to the trash and get the error message from file (s) name (s) too long

  the situation: I erase all the contents of Documents and sending them to the Recycle Bin.  This is in preparation for a new backup of Documents to an external hard drive device.
  What continues to be: whenever I press DELETE I get the following error message, "file contains elements whose names are too long for the Recycle Bin." -I combed through all the names in the Documents & shortened all the time, but I always get this error message.
  questions: How can I identify & locate offend him, too long file name of the file or files?  What is the space limit for the length of the file/folder names + character?  is it possible to change the settings to correct this extremely frustrating loop somehow, I'm in?
  I would greatly appreciate any help/tips on the issue.  Thank you!

  Hello

  you keep insisting on 'my

  There is no "My Documents" on Vista

  It's only 'Documents '.

  Windows Vista renames 'My Documents' as, simply, 'Documents '. "My music", "My pictures" and "My videos" have also lost their prefix and moved to directly under the directory (profile).

• error messages from 631/651 with mobile broadband Sierra

  Constantly disconnecting Sierra without my help and give me 631 and 651 error messages. Did not initially so I wonder if the automatic updates caused it. Sprint said there is a Microsoft problem but I installed all the updates and nothing's worked.

  Hello

  1. What is the full error message that appears on the computer?
  2. What is the model number of the device?

  Method 1:
  The steps in the link and check it out, try:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  You can also try to update the network adapter drivers and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can download the driver\software from the manufacturer's Web site. See the link for help:
  http://www.sierrawireless.com/en/support/downloads.aspx

  Method 3:
  I also suggest you to turn off the antivirus and check if it helps
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.