Captivate swf issues navigation - buttons sometimes work, sometimes not

Similar Questions

• Captivate in issue Navigator

  So, I did a software simulation in Captivate 5.5 a process in SharePoint. So then when I did was download a helper library in sharepoint. The film is beautiful, when I look in my files. But when I click on it in the library in SharePoint it opens in the same browser and I get here and there are blue lines. I use IE8. Anyone has any ideas or suggestions on what I could try to make it prettier. I already upped the quality at high-24, and it had no effect.

  

  You may have missed my drift.

  What is the MINIMUM of your target screen resolution?

  You need to find this point because it's irrelevant what screen size YOU have, or even what the maximum resolution available on most laptops is.  The important thing is that your users are running and how small (not size) you do your content to make room for toolbars in the browser, chrome, bars etc.

  Your hostile local IT dudes are often able to cite the results of scripts, they run when users log on to the network and give you a breakdown of all the users of the resolution of the monitor.  If you can't get this info, then you need your audience yourself, or just assume a given monitor resolution and work for that to be lifted.  If you're wrong and use the one that is too large, you will be pestered by complaints from users on the screens of 1024 x 768 who cannot see your content or reach the navigation buttons on your PlayBar.

• Exit EXIT 7 Captivate SWF and HTML5 button does not

  I have several courses developed in Cp 6.5 which do not have this problem and are running on Taleo LMS.

  I have built a test course with 6 slides (mostly empty), including two quiz questions. On the last slide, I placed a button to complete a course with success: action to leave. End of project options are set to close the project and I've included a release on: output action on the last slide. Button finished a course successfully closed the browser window in the preview in browser (IE9) and output modes Preview HTML5.

  I've published then run towards HTML5 and SWF output with scalable selected HTML formats. Once I downloaded during the LMS and tested, the button complete a course does not close the browser window. I tested for IE9, Firefox and the iPad, and it does not work on any of them. I also tried including the built in Exit on the PlayBar, and it does not close the window either. To the last slide, after clicking on the button to complete a course, the slide goes blank and then stops.

  The LMS reports that the course is complete; I thought maybe it was a problem with the settings in the LMS of the course, however I have several other courses that have been developed in Cp 6.5, released in the same LMS with the button "Exit" even on the last slide, and I mirrored every part of course who has worked in the past.

  Suggestions as to what might keep the window close?

  Thank you

  PV

  You can test this to close the window of course:

  Insert 3 buttons or smart shape used as buttons (like buttons of end of course).

  The first button apply an action to run javascript and in the script window, use this script: parent.close)

  The second button apply an action to run javascript and in the script window, use this script: top.window.close)

  The third button, perform a standard action and set "cpCmndExit" (System variable) with 1.

  Publish the course, then transfer it to your LMS and check if any of these work for you?

  Thank you.

• Captivate SWF issue 9

  I'm trying to publish internal training (former SWF with AS2 files) 9 Captivate. SWF files that I can play in the browser without problem, when I publish in Captivate (format Scorm2004) in the slides I can't play all of the SWF file, but a part.

  You can change the framerate in Captivate to 25 fps. This means that the entire project will be converted to this framerate. Go into preferences, editing, project, publication settings.

• Button controls works only not on Satellite A60

  The controls on my A60 buttons no longer work. I tried to reinstall from CD, but I get a message saying that I have to uninstall and reinstall. I tried to uninstall via Add/Remove Programs, but appears not to have worked, the element of control still appears in the list even after a reboot. Does anyone know how to solve this problem.

  Thank you in advance.

  Try also reinstalling the common modules.
  Don't forget to restart after removal of the first version.

• DV9500T CTO QUICKPLAY BUTTON MUTE WORKS BUT NOT WILL SWITCH COLORS - BLUE STAYS ALL THE TIME

  I've upgraded to Windows 7 and everything works except the change color button mute of QuickPlay.  It remains blue all the time EXCEPT at startup when it becomes red or orange, then back to blue.

  He cut the sound, but in low light conditions, it's frustrating to always have to "wonder" If the sound is muted or not.  I tried several drivers but nothing works.

  HP QuickPlay Web sp38361 update

  sp44777.exe

  sp38171.exe

  It drives me crazy because I managed to install a driver on a HP of friends with no problems.  It is a pilot who has corrected the error of acpi\hp0006 in Device Manager.  After this installation, its button mute changed to red (or orange) and the problem was solved.  I am showing no abnormalities in the Device Manager.

  Thank you

  Jeff

  HP DV9500T CTO

  Windows 7 Ultimate 32 bit

  4 GB of RAM (shows only 2 GB)

  wimblus ,

  Bingo, I went on the Realtek site, downloaded the driver, installed and now I get the red button when the sound is muted.  I want to verrrrrrrrrryyyyyyyyyy thank you very much for this tip.

  I also want to thank all those who contributed to a solution to my problem.  Your efforts may not possibly be offset by a simple thank you, but I hope that karma you all extended to me in my research goes back to you in spades.

  Driver installed:

  Codecs Audio high definition

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Vista, Windows7 Driver(32/64 bits) driver only (executable file)

  R2.47

  9/4/2010

  55873 k

  Thanks wimblus and everyone.

  Jeff

• Buttons/code works do not systematically across frames/editing questions

  Hi all

  
  

  Total newbie here. I'm trying to produce something that really should be super simple but I must be missing some basics.

  
  

  I use Flash Professional CC, a html5 canvas, Mac OS 10.8.5

  
  

  I created 6 slides, I want users to be able to navigate. Home slide seems superior work. I created 5 buttons that go to the appropriate slide and stop using this code:

  
  

  
  

  this.gotoschool.addEventListener ("click", fl_ClickToGoToAndStopAtFrame_11.bind (this));

  
  

  function fl_ClickToGoToAndStopAtFrame_11()

  {

  this.gotoAndStop (2);

  }

  
  

  
  

  I created a back button, which gives it its own unique instance (back1) to the second slide (frame 1 - for some reason any code reading frame 1 0, frame 2 frame 1, etc) that sends users to the first slide using this code snippet:

  
  

  
  

  This.back1.addEventListener ("click", fl_ClickToGoToAndStopAtFrame_0.bind (this));

  
  

  function fl_ClickToGoToAndStopAtFrame_0()

  {

  this.gotoAndStop (0);

  }

  
  

  
  

  Then, I create another button on frame 3, (back.2) and added the same code snippet:

  
  

  
  

  This.back2.addEventListener ("click", fl_ClickToGoToAndStopAtFrame_0.bind (this));

  
  

  function fl_ClickToGoToAndStopAtFrame_0()

  {

  this.gotoAndStop (0);

  }

  
  

  
  

  However, when I saw or that you post, it is not even save it as a button, let alone date back to the first slide. I don't get the "pointy finger" cursor, it looks like a blank slide with no interactivity. No idea what I'm missing here? I tried to create a button and giving different instances on each image and using the same code snippet, but that don't seem to work either.

  
  

  
  

  
  

  Here's a screenshot of my calendar and the scene:

  
  

  

  
  

  Help, please!

  
  

  Oh, and while I have you here, I noticed also that some items moved during publication and I have no idea why or how avoid this. It's particularly frustrating because I spent much time aligning text and images when they come out unparalleled and it seems really unprofessional.

  
  

  Here is a screenshot, you'll see in the lower left corner, three text lines have changed and are not ' aligned with the corresponding colored dots. Compare that to the screenshot above scene. Also, you will see in the bottom right I had a yellow arrow next to the text 'back' (which I recently replaced it with a "<" symbol) which also misaligned when published.

  
  

  Any help is appreciated.

  
  

  Thank you! -Patrick

  

  Figured it out!

  I had ignored this warning in the output window:

  "Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system."

  It turns out that this image in the left column, the WellSAT oragne button is a bitmap. Apparently, evenunrelated buttons do not work if there is somewhere a bitmap image in the same frame. I replaced the logo with the text and the buttons worked.

  I'm glad it works now, but it's quite frustrating to think I can't have both a bitmap image or a button on the same page. If anyone has any idea why this is the case and a solution, I would like to hear about it.

  Thank you

  Patrick

• Loading multiple SWFs and saving them (code works is not under Chrome and Firefox 23)

  Hey guys,.

  Anyone has an idea why this suddenly does not work? (It works under internet explore but not firefox and chrome)

  The code below is placed on my main swf to preload all my external swf and store them for not having to wait too long to get there.

  Thank you guys.

  I took the code by btw: http://www.beautifycode.com/the-finer-art-of-loading-2-handling-multiple-swfs#snippet

  I am running flash player 11.8.800.94... He used to work under Firefox and Chrome

  	var _swfLoader:Loader;
  	var _swfRequest:URLRequest;
  	var _swfPathArr:Array = new Array) '00.swf', '01.swf', '02.swf' );
  	var _swfClipsArr:Array = new Array();
  	var _swfTempClip:MovieClip;
  	var _loadedSWFs:int;
  	startLoading (_swfPathArr);
  	function startLoading(pathArr:Array):void {}
  	_swfLoader = new Loader();
  	_swfRequest = new URLRequest();
  	loadSWF(pathArr[1]);
  	};
  	function loadSWF(path:String):void {}
  	setupListeners (_swfLoader.contentLoaderInfo);
  	_swfRequest.URL = path;
  	_swfLoader.load (_swfRequest);
  	};
  	function setupListeners(dispatcher:IEventDispatcher):void {}
  	dispatcher.addEventListener (Event.COMPLETE, onSwfComplete);
  	};
  	function onSwfComplete(event:Event):void {}
  	event.target.removeEventListener (Event.COMPLETE, onSwfComplete);
  	_swfTempClip = event.target.content;
  	_swfTempClip.customID = _loadedSWFs;
  	_swfClipsArr.push (_swfTempClip);
  	If (_loadedSWFs < _swfPathArr.length - 1) {}
  	_loadedSWFs ++;
  	loadSWF (_swfPathArr [_loadedSWFs]);
  	} else {}
  			//
  	}
  	};

  I have no problem with ff and I don't see any problem in chrome.

  You probably have a typo in if:

  loadSWF(pathArr[1]);

  should be

  loadSWF(pathArr[0]);

• Show/hide an element with the click of a button - Script works does not in Firefox

  Hi all
  
  Basically, I'm looking for show/hide a DIV with the click of a button.
  
  The script works in IE but fail in FF.
  
  I am sure that I am the problem here.

  <script type="text/javascript">
  
  function toggle(box) {
       var el = document.getElementById('box');
       el.style.display = (el.style.display != 'none' ? 'none' : '' );
       
       
       value = document.getElementById('content').value;
       if(value=="Show Calendar"){
       document.getElementById('content').value="Hide Calendar";
       }
       else{
       document.getElementById('content').value="Show Calendar";     
  }
  }
  </script>
  
  
  <style type="text/css">
  #box{
       background-color: #C0C0C0;
       height: 100px;
       width: 100px;
  }
  </style>
  </head>
  
  <body>
  
  <div id="box">
  </div>
  
  <input id="content" value="Hide Calendar" type="button" onclick="toggle(box)" />
  </body>
  </html>

  WE

  He also worked if you had changed-

  
  on this subject.
  
  		   

• SWF inside movieclip doesn't work do not

  I have four buttons in movieclip inside a swf file. (External Swf) Different layers

  I need to access these buttons separately.

  If the external swf file is as3 AND has finished loading, you can reference the main timeline by using the content property of your charger cast as a movieclip.  from there, you use the usual point notation to reference your buttons:

  MovieClip (yourloader.content) .btn1

• Resize the navigation buttons

  My admittedly crude site takes shape, but when I roll over the navigation buttons (which you do not yet have real links), the type of police seems to change to "BOLD" and the button changes size to accommodate larger police.

  www.ourhealthcare.info

  Any suggestions?

  Thank you.

  Line 219, contains a syntax error.

  Change

• Creation of a federal agency of insurance health care

• TO

• Creation of a federal agency of insurance health care

Closing

• has been changed
.

\

That should clear up validation errors.

• My button / stop, shutter button and volume button works sometimes not

  Hello
  I just bought a xperia premium z5.
  Is the hardware or software problem?
  I do not know
  Sometimes the fingerprints without being detected. (not available material fingerprints) and the volume button and the shutter button cannot work/press
  Have you guys had the problem?

  Help!

  HII
  Please try power button repeat

• Inserted Captivate SWF w / Jump to Next Slide in Captivate Project hand - button

  I inserted a Captivate SWF file on a slide, and I want a button in one inserted SWF to move to the next slide in the main project of Captavate.

  I was wondering if I have to use shares advanced on this inserted Captivate SWF or javascript on this button to move the main Captivate project to the next slide?

  I'm with Lilybiri on this one.  With all of the slides in the same project is the best way to go.

  When you start a new training project, the height and the width of the stage of project file is one of the main decisions you need to get right.  Then when you capture any simulation content, you must make sure to match the size of the screen exactly so adding slides to capture is just an exercise in copy/paste.

  Captivate SWF inside other Captivate SWF of nesting is a highly questionable practice that Captivate was never designed to support.  It MAY work sometimes, but it can also cause all sorts of issues as well.

• Navigation buttons do not work during audio playback

  I have a dysfunction of the brain...

  I use the audio function TextSpeech on 20 slides. I use a master slide to contain my header and footer. The footer includes my navigation buttons. While the audio is playing, the buttons do not work. As soon as the slide audio is finished, the buttons work. What I've done wrong?

  I built the main navigation using my personal button images and click on the boxes, built on a page standard, and then stuck in the slide master, a process that I used previously.

  By the way, if place the buttons of navigation (footer) on each slide, they work as I expected. I don't like all these items repeated on the timeline of each slide.

  Any ideas?

  Thank you

  Jack

  Captivate 7

  Windows 7

  I tried to reproduce this error. In the standard slide, I placed an image, added a box to click it and assigned her to take action on the next slide. When I paste these two objects on the slide, click box is stripped. So, when I presented in preview the project, I was automatically slide next without having to click on anything that it is me. (Since the click box to which I assigned the action is missing).

  However, the solution to this is that you can place a button smartshape modeled on slides, entrust your image and add the necessary action. The release works as expected.

  Anthony

• Connectivity LAN on Satellite L20-205 works sometimes and sometimes not

  Hello

  Well im using ethernet to connect to internet. The thing is, sometimes it works, sometimes not. There are times when I can connect immediately after that I turned on the laptop, there are moments where the connection becomes available after 10 minutes of operation of the laptop, sometimes it doesn't quite work.

  However, sometimes the connection could freeze even after running for some time. Actually, its kind of voodoo magic connection to the net via this phone. It is said that the cable is connected, but there is 0 packets. It frustrates some me... so I'm wondering if anyone has come across a similar behaviour of his satellites?

  Hello

  On this path, it is not easy to say why this is happening. Good and stable connectivity LAN depends on a few different factors. You must know that this laptop can not only peripheral being responsible for this. I put t know what LAN you use (probably DSL at home), but you must also check if the ADSL modem or router is configured correctly.

  If you are free, try to connect to your laptop to some other LAN to check how it works on an independent network. I really can't imagine that LAN card or driver may be responsible for this.

  I use at home of DSL connectivity and if the router is without power for a while, it can takes about 10 minutes before I can use an Internet connection.