Capture video from Canon Vixia HV 30

Similar Questions

• Capture video from Canon Camcorder-DVD - computer laptop crashes!

  My Canon DVD camcorder is connected to my laptop via a firewire cable using the port of the smart card and a standard firewire adapter. The laptop (Windows XP) recognizes hardware Plug and it is successfully activated. However, right now, I'm trying to capture video streams using the drive Windows DVD laptop freezes and nothing works. It must be stopped and restarted. It works fine on another laptop.
  Can anyone help?
  Thank you

  Post edited by: AKGP

  Hello

  I can t give you a solution exactly but to me sounds like something wrong with the software that you used.
  What applications did you use? Have you tried different programs?

  I think you should try to test with other capture software. So, you could eliminate the source of dysfunction. You know, you can know if it s a hardware or software failure.

• How to capture video from my tuner to go to Movie Maker

  Original title: Windows Movie Maker on Vista: "capture video from Device.

  I'm trying to convert my VHS videos in files that I can store on the hard drive of my PC.  I have my VCR connected to my TV Tuner from Dell, which is connected to the USB port on my Dell.

  Supposedly, I should be able to capture video VHS with Windows Movie Maker.

  However, why the Windows Movie Maker (version 6) on Vista doesn't have a "vidéo Capture Device" option in the file Menu?

  Use the program youre using this tuner. Change to whatever you have plugged in (perhaps S-video or something). Video capture of Movie makers is usually for FireWire cameras / maybe USB. But not a USB tuner

• Why can't I capture video from the device under windows 8?

  I have tried a myriad of programs to capture video from my Hauppauge wintv-hvr 950 on my computer windows laptop 8. No program does seem to work so I went back to the proven windows movie maker 2.6, except for a device capture option is is no longer there. Does anyone know how I could fix this problem?

  You have the latest drivers/software installed (from 10/06/2013)?
  http://www.Hauppauge.com/site/support/support_hvr950.html

  Yes, I just did, but the import of video in movie maker 2.6 options still don't understand, "Capture device".

  Well, first of all – Windows Movie Maker 2.6 is for Windows Vista.  If you managed to make it work on Windows 8 - which is not supported by anyone and if you use Windows Vista: wrong forum.  ;-)
   
  Second - if you're running Windows 8 (as indicated by your line of topic and forums that you have chosen to display in)-indeed the next question would be: did you add the Pack Windows 8 Media Center to what you run, Windows 8 Pro?
   
  Followed by: have you contacted Hauppauge support?
   
  Their own web page to buy the card does not list Windows 8 as an operating system supported:
  http://www.Hauppauge.com/site/support/support_hvr950.html
   
  "What operating systems are supported by the WinTV-HVR-950?

  • Microsoft Windows 7-32 and 64 bit
  • Windows Vista (all versions), 32-bit and 64-bit
  • Windows® XP, XP Pro, or Windows XP Media Center Edition with Service Pack 2 (or higher)
  • Mac OSX (with the Elgato EyeTV software)"

  And finally - what are your system specs?

  • 2.2 1.8 GHz Centrino GHz P4 or equivalent (minimum).
  • 2.8 CPU clocked at GHz for analog TV recording with MPEG-2 (minimum).
  • Adapter with 64 MB of RAM (minimum) graphic display.
  • Sound card or system.
  • USB 2.0 port (will not work with USB 1.1).
  • CD-ROM drive (for software installation)

  Is this a new system provided with Windows 8, an old system you upgraded with Windows 8, or what?

• I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  CS6 C

  I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  The CS6 capture Tin can, set up a message that a capture device is offline.  Camera Sony DCR-TRV340 is not listed in the CS6 device Type list in the CS6-DV/HDV cameras Sony device control settings box.  I downloaded what I believe are the right drivers for the TRV340 and when I connect the camera to the computer, the computer shows it is in the box devices and printers, but CS6 do not recognize.  Do I need to install these drivers in a specific CS6 program folder?  If Yes, where can I find these drivers in the Professional operating system of windows 7, and in which folder CS6 would copy their?

  Thanks John,

  The controller IEEE 1394 of switching for the Legacy driver did the trick.  CS6 now recognizes my camera.  Thank YOU MUCH for the help!

  Chuck

• Capture video from a Canon MVXS350i DV PE11 camera.with.

  Hello

  What video capture program PE11 seems to identify my camers as a camera MicrosoftDV and VC and I get a message saying "your current settings of the camera is different from your project results settings cannot be optimized.

  However, I can capture video and it seems OK.

  How do I check and optimize the targeted parameters and what are they?

  I use a firewire card.

  I'm running Win7 64 bit.

  The camera is six years old and I can not find if there are new software for PC.

  Thank you.

  Hi Bill and Steve,

  I had not been within the parameters of the new project, I've now done and made the relevant changes. The settings were for the HD as suggested and also NTSC (I am in PAL-land). I'm pretty confident, that this will do the trick.

  The camera is a Canon MVX350i Mini Ribbon.  (looks like an extra ' had there on the title of my discussion) connection via firewire.

  It is midnight here now, so I think I'll try a new project of tomorrow.

  Thanks much for the advice.

• Import videos from Canon HF R21

  What I have to use the software provided by Canon (Pixela) worthless or can I import my videos in first things 10 or first CS5?

  Absolutely NOT use the Pixela software to capture your videos - unless you plan to edit in Pixela.

  First of all make sure that 1920 x 1080 video, you draw is 60i. Don't shoot in 24 p, if you plan to edit your video in Premiere Elements.

  Then you should start your Premiere Elements project using the project settings for the stereo 1920 x 1080 AVCHD.

  Then plug your camcorder into your computer and use Premiere Elements' Get Media / Flip AVCHD or a camcorder to HDD at the port of the video from the camcorder to your computer and in your project.

  For more information on the implementation of a project and to get inside media, see my basic training tutorials 8 part free to the first Elements Muvipix.com support site.

  http://forums.Adobe.com/thread/537685

• Satellite A300 - 1MX Win7: can't capture video from conencted Camcorder FireWire

  Hello

  I have a problem with the video capture from a Sony TRV60E with a Satellite A300 1MX and Windows 7 camcorder via the firewire connector.

  The camera is not recognized (or more) Windows.

  I already changed the firewire driver under windows to the "legacy", also often described in other forums.
  And for a few hours, everything worked fine. The camera has been recognized and Pinnacle Studio 14 could capture video of him.

  But after eight hours, the camera was suddenly is no longer recognized.

  -l' camera is immediately recognized by a XP system
  -On the system W7, I uninstalled, reinstalled the driver firewire, powered down the material (shot of power and the batteries for several minutes), but nothing helped.

  I may have a different firewire driver? Or another operating system?

  Thank you.
  kJ

  It is not easy to say what the problem is here.
  For confuses me the fact that cam has BEEN recognized in the past and now for some reason any it is not recognized correctly.

  All devices are properly recognized in device (firewire port) Manager?
  You can test the firewire port using another device?

  You have discovered what may be the problem. Test port firewire with other devices to see if other devices will be recognized correctly.

• Unable to transfer video from Canon Legria HF R16 to Microsoft Movie Maker

  Canon Legria HF R16 and Microsoft Movie Maker Microsoft Movie Maker does not accept the transfer of video from my Canon Legria HF R16. This camera is bundles? Are there ways to get around? MovieMaker is significantly better than the software supplied.

  Microsoft Movie Maker does not transfer video from my Canon Legria HF R16. This camera is bundles? Are there ways to get around? MovieMaker is significantly better than the software supplied.

  =================================================
  Movie Maker is designed to import from a video tape... from your camera uses
  Flash memory is perhaps the best bet to download video in a folder on your
  hard drive.

  Once downloaded... If Movie Maker will not import the video... you may need
  to convert it to a compatible format like WMV.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cc 2015.4 Lightroom will not import video from canon 5 d mkii!

  I was able to import videos directly from my canon 5 d mkii in lightroom on my macbook pro 2015. IPhotos, bridge, and Lightroom show an error when I try to import videos from 5 d. Import photos perfectly fine, but no video. I tried to import the videos same in Lightroom to my pc and they import fine. I need to import it back in my mac! Help, please.

  Hello Stephen,

  It seems a problem with the destination folder, then I would suggest to check if you have read and write access to the destination folder where you try to import images.

  Also try to change the location of the destination folder, and then import the videos in Lightroom.

  Let me know if it helps.

  Kind regards

  Tanuj

• Solution for capturing videos from VHS, Mini-DV and other ribbons

  Hi friends

  We have a lot of tapes, VHS and Super VHS (old memories of family). In the last decade (wow hehehe) we had a Pinnacle DC - 30 and after a DV - 500 (acquisition card) to capture these videos.

  Now, our camera is based on the memory card, it s so easy to download movies. We do not have a computer equipped with a capture card anylonger (the maximum is a firewire and USB card).

  My question is: Y at - it equipment or a solution to capture these videos from VHS, Mini-DV and other bands. For example, the video CD has an RCA output... If having a way to turn the signal by Firewire or USB, that would solve.

  For mini DVs, we have an old Sony HD1000 camera, but this device firewire output is damaged :/ So, we can also not to capture videos of these bands any longer.

  Do you know a solution or material? (I know a capture card as a Matrox would be a good solution, but now it s a little expensive for capturing videos )

  Thanks much for the tips

  Gustavo.

  http://www.grassvalley.com/products/converters

• capture videos from rca to usb?

  trying to capture videos on the VCR. I use a USB RCA cable. I don't see the option anywhere. This is a limitation of the trial version or it is not possible with the elements of the first? y at - it adobe software that will allow me to capture from my vhs? or should I use another software to capture and then use PE to change?

  Impossible to use more low-end cards capture or devices or capture video via USB if you want to edit in Premiere Elements, w. The resulting video is not a format, with which the program can run.

  The frequently asked questions to the right of this forum discusses bridges DV, devices that can capture almost any video to DV - AVI, Premiere Elements video format and video editors practically everything on PC prefer to work with.

  http://forums.Adobe.com/thread/431853?TSTART=0

• Satellite A200: How to capture video from your camcorder

  I bought a JVC GR-D50EK camcorder, about 4 years ago. So far I have never tried capture video on the computer, but I need to do now and I can't seem to do. I have a Toshiba Sat A200 which I bought 2 weeks ago and I tried to use Ulead DVD MovieFactory and Windows MovieMaker.

  ImageMixer that came with the camcorder doesn't seem to work either. I downloaded the update to version 1.1. I don't know where to start looking for the answer.

  The software for the camcorder has installed successfully, and when I plug it into the PC via USB, it seems to be seen very well in the Device Manager. It's just when I try to use any of the software it seems to be seen.

  It appears under imaging devices in Device Manager, but when I go to scanners and cameras, it does not appear

  It should be done very easily. It is important that your cam is recognized by the system and shown in Ulead DVD MovieFactory. Use the save option and at the same time press PLAY on the camcorder. You should be able to see the film in DVD MovieFactory window.

  If works well with my Sony camcorder. In my case I have firewire connection on my laptop.

• How to capture video from a digital recorder to the computer

  I have a laptop HP pavilion g6.

  Running windows 7.

  What do I need to capture video on the pc of my recorder?

  Hello

  Probably that easy is a video capture USB 'map', I bought one before Christmas, for an amount of $ 36, it is similar to these:

  http://www.Google.com.au/search?q=USB+video+capture&hl=en&BIW=1680&BiH=849&PRMD=imvns&source=Univ&TBM=shop&TBO=u&SA=X&EI=sgUWT8uWE62UiQfAtOhD&SQI=2&ved=0CHsQrQQ

  Kind regards.

• I get an "invalid pointer" error message when I try to capture video from my sony camera?

  I use a Sony DCR-TRV250, Windows XP Pro with SP3. When I try to capture video I get the error message "invalid pointer". Then after clicking OK I get, ' the unusable device at this time because there was an error when starting the device.» The video capture device window is open behind this error message.

  Everything works fine on other computers, so I think I am missing a file any.  Is there a way to update or reinstall Movie Maker?

  Hi LonJett,

  ·         Have you checked if there is any software updated the same?

  Log on to the Sony website and download the latest version of the software for the camera. Uninstall the existing software\driver and install the last downloaded software\driver and check for the issue.