Short of data disc (D0...

Similar Questions

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Tecra M1: Unable to create a data disc

  Hello

  I'm developing a package to deploy Toshiba Disc Creator on all our Tecra M1 and M2 computers laptops, which represents about 200 units. The package I created works fine on all Tecra M2, but the Tecra M1, users get a problem BOUNCING. When they burn a data disc, they get the following about 50% of the time error: "failed to create a data disc. The current process stops. »

  Even if they get this message, the creation of cd is always successful most of the time, but about 10% of the time, he is corrupt. There is no way to know if it actually worked or failed until you try to copy data to newly create CD. It also happens that doing an exact copy of a CD will give a similar error message.

  I tried to find information about this software on the internet, but I am at a loss at this point, because no document seems to exist and event our Toshiba Rep doesn't know what to do. If anyone has a suggestion, I'm willing to try.

  Thanks in advance.

  To me, this looks like a simple and common error during the burning process.
  I put t know what burning software you use but I recommend burn media with Nero. It of simply and heavy application performance it s my favorite
  You must also use a burning program. Don t mix different programs such as sonic for example.

  Additional test different types of media in my practical knowledge not all media (CD or DVD) is taken in charge and, sometimes, you can get errors in engraving.

• What is a data disc?

  Hello smart people!

  I have what is called a data disc on my iMac which is empty (160 GB). Can someone tell me what his, and if I can just use it for file storage?

  Thank you very much

  Jennie

  iMac early 2008

  2.8 ghz processor intel core duo

  4 GB 800 mhz DDR2 SDRAM

  Yosemite 10.10.5 OSX

  You can use it for storing files.

• If the upgrade to windows 7, it will be able to read data discs my xp?

  If the upgrade to windows 7, it will be able to read data discs my xp? l have data recorded on cd and on Word, and then transferred to cd/disc, to save. My XP PC can read the disc on reinstalling Microsoft Works, which has the word inside program. Windows 7 will be able to read these discs of data?

  Hi steve,.

  Just to make sure I understand, you have the Word documents on them with backup discs and wondering if they will be recognised by Windows 7.
  If this is the case, then you should not have to worry. Windows 7 will read the disc properly. However, as with XP, you will need to install the correct program that you would use to open files.
  In other words, if they are Word documents, then you will need to have MS Word installed or installed works for viewing.
  Hope this helps and let me know if you need more information.

• copy of a dvd/data disc using vista

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  ==================================
  Here's an easy way to create a copy of your DVD.

  The following freeware can create an ISO Image
  your DVD and then burn it to a blank dvd.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Using Linked clones with a data disc?

  We expect on the creation of our BASE image with a 50 GB C:\ drive.  For the moment, we will not use Thinapp, so the few apps we need for our people call center will be installed on the base image. We also plan to use the profile unit of Liquidware Labs and will use linked Clones.  My question is, do I have to create a data disc (D:\) to install Apps or just expand the C:\ drive?

  If the user data (documents, computers of desktop, thems and local profiles) will store locally and needed to preserve for the future and use the redirection of the user's data and set separate drive for this.

  In the case where the user data is Vagabond (stored and shared in the Center), then do not use that feature, simply create a bigger drive C.

• I used to be able to do with discs DVD-R data discs, now iv changed my hard drive and my computer only recognizes CD - R when I try to burn data?

  "Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R.  Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something?  Windows XP computer bought from Dell about 4-5 years (Dell 5150).  He let me play commercial CD, burn CDs and burn data on CD - r.  He no longer do anything with a DVD-R disc, wont even recognize one, please help

  Hi malikchebli,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

• The difficulty to burn an Audio / or data disc using Windows Media Player on Windows Vista

  OK, so here's my question:

  I cannot burn an Audio / or disk of data using Windows Media Player. For some reason my Media Player is not finalize the discs that I do and he pops to 94% or 98%. I have a TEAC DVD +-RW DVW28SLC ATA Device. CD-ROM/DVD-ROM drives.
  Has anyone experience this problem with Windows Vista?
  Thanks in advance,
  Melissa
  Hi Melissa,
  Thank you for writing to Microsoft Communities. I understand that you are facing problems when burning a DVD in Windows Media Player.
  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
  1. What is the format of the file you are trying to burn?
  2. do you have a third-party CD/DVD burning software installed on the computer?
  3 have there been recent changes to the computer before the show?
  4. are you able to burn through windows Explorer?
  Let's try the following steps:
  Method 1:
  You can take one or more of the following, and then try again:
  a. Verify that the CD burner is properly connected.
  b. clean the disc and verify that it is not damaged.
  c. try a different brand of blank discs.
  d. If another program is currently burning files on the CD, wait until the burning process is completed.
  e. Quit other programs that may be using the CD burner.
  f. restart Windows Media Player.
  g. restart your computer.
  Method 2:
  You can try the steps to solve problems in Windows Media Player
  Please return to the State of the question so that we can help you better.

• test of running watch short DST failed disc 1 can I just replace the hard drive

  HP ProBook 4520 s has stopped working

  Yes you can. Try to use a hard drive that is the same or larger than the size of your current HARD drive.
  Contact HP in your area
  Back up any personal data if you can
  Order recovery disks if you have not created a.
  
  Thank you

• can I drag & drop in records of drive c to d to data disc

  I have a lot of free space on the data drive D. can I go to c and d drives properties and drag & drop of files/folders from one disk to the other?

  Hello

  read this:

  Move your folders and files of the user to a different partition

  http://www.vista4beginners.com/move-user-files-folders-to-another-partition

  ________________________________________________________________

  or save data on D: - remove D: - extend C: into the now unallocated space where D: is

  How to remove and extend a Partition with Vista disk management

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• Accidentally, I installed Vista x 64 on my DATA disc... Is it possible to recover the data?

  In an attempt to save all my data to an external HARD drive, Vista x 86 crashed, so I decided to reinstall, but with x 64 with good knowledge of all my data on a dedicated reader (what I could unplug). Unfortunately, despite the audit and the doubles to make sure that I disconnected all drives except the OS HARD disk, I even managed to install the new Windows x 64 on my disk DATA (!). The data drive contained the last ever pictures of my father... I would be gutted absolutely losing their. Is it possible to recover data after such an act of stupidity?

  Thank you very much

  Matt

  p.s. I now back up ALL my files to 5 separate hard drives in 3 different countries! I never make this mistake once again!

  Hello

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• I would use mSATA 32 GB SSD in 14z 5423 as data disc normal

  I have a new Inspiration 14z 5423 and it comes with 500 GB HARD drive and an mSATA SSD 32 GB for acceleration. I intend to replace the HDD with a SSD, so I have more acceleration.

  But I don't know how to disable acceleration and use the SSD of 32 GB of normal data storage.

  Any help in appreciated.

  I've been successfully disabled iSRT. But in a slightly different procedure that has been described above. At the time, I received 14z, trie GUI has not been installed. And I went to Dell.com and downloaded iSRT driver installed. Main player has already been associated with the mSATA for accelerated reader.

  If I'm above procedure to disable sorts them in the BIOS, I won't be able to separate the main drive of the mSATA drive. So, here is the procedure I followed.

  -Leave the BIOS for SATA operation setting as it is for the trie.

  -Disable 'Technology Intel Quick Start' in the BIOS because it uses 8 GB mSATA

  (Note that I'm really confused of sorts and iRST, I think Intel should really change)

  -Windows startup

  -Launch GUI TSRI

  -Click on 'Accelerate' tab and click 'disable acceleration.

  -Click mSATA drive icon, and then click 'reset to available.

  -Restart Windows and the mSATA 32 GB is now available as normal storage

• Burn data disc in Windows 7

  I have a disc with 32 files for a total of 550 MB.  I need to provide this file to 20 customers and have no any place of storage to the place that anything could happen to.  The best solution would be to copy/burn the disks to distribute.  I remember being able to burn discs in Windows Explorer in versions of Windows previouls, but can not find a method to do the same thing under Windows 7.  Can someone please advise?

  Thank you

  Paul

  If you use windows, built in software, you can copy one of the disks to a folder on your hard drive, then repeat the process of engraving 20 times.

  Personally, I use either Roxio or Nero software that I bring, tell him to copy a disc, then tell him how many copies I want and insert new records when he tells me to.  There are professional services, such as Kinko's and OfficeMax that will do this for a price if you would rather than route too.  Finally, you could watch free programs you can download like imgburn from http://www.imgburn.com .  You could also do a search on http://www.download.com for other free downloads.

  Good luck.