Car bluetooth not recognized in Moto G 4.4.4

Similar Questions

• G570 bluetooth not recognized after update to 8.1 windows

  This is a very unusual problem, and I have not found one post on this anywhere!

  First of all my specifications specifications

  Lenovo G570 (reference number: 43345JU)

  i5 - 2410M

  8 GB RAM

  Qualcomm-Atheros AR9285 WLAN

  do not know the brand of bluetooth (for most broadcomm)

  Provided with Win7 Home premium x 64

  The Win7 it came with also had lenovo energy management through which I could toggle the WIFI and bluetooth on and outside. Given that I've never used the bluetooth, I turned it off via Power Mgmt.

  Interestingly, when I was running Win7 I also had this dual boot with Ubuntu. And if my Bluetooth has been disabled through the win7... EM bluetooth wouldn't be recognized in ubuntu and there was no way to turn it back on... I had to start again under win7 and turn it on via EM and start in ubuntu.

  Recently, I updated to Win8.1 but had not put on the bluetooth before doing so. In Win8.1 bluetooth device is not recognized everywhere... no PC settings (metro UI), not even in Device Manager. I tried to install the energy management to 8.1 from the support site, but he was extremely buggy and found no option to activate bluetooth. The old EM has not installed correctly in comaptibilty mode.

  In ubuntu now (dual boot with win8.1) its still the same. Bluetooth not regonised just like before.

  I can't go back to win7 now. There is no correct EM to win8.1. There is no option in the BIOS about bluetooth.

  How can I activate the bluetooth adapter? ANY help is appreciated...

  Hi neokenchi,

  Please help out me. Yes, I had tried to install win7 EM but trotted in compatibility problems. But now started digging through the forums and found a link to EM that works on win 8 and 8.1 of victory. It has even installed the power controller driver virtual lenovo APCI.

  http://driverdl.Lenovo.com.CN/Lenovo/DriverFilesUploadFloder/36900/WIN8_14.EnergyManagement.exe

• Satellite A100-906 - Bluetooth not recognized Vista

  This laptop came with Windows XP installed and the bluetooth was working fine.
  Unfortunately my HARD drive was destroyed, and after installing a new and I also installed Windows Vista Premium 32 bit.

  The problem is that even if my wireless card works great the bluetooth device is nowhere. It's as if she is not on... even when I try to install the newer bluetooth stack he asks that the device bluetooth turned on!
  Is there a solution to my problem? Is it possible that the BT adapter is destroyed?

  Thanks in advance!

  BT can be used if the BT module is successfully activated. To do this turn on WLAN using WLAN switch and then activate BT using the FN + F8 key combination.
  * You can probably remember how it works. Can you? *

  As I see you now have Vista.
  Does the FN + F8 key combination?
  You can use Flash cards?
  Have you correctly installed all the stuff of Toshiba?

  Boyfriend sorry but if you forget to install something that it won't work because you can not activate the BT module.

• Bluetooth not recognized after upgrade to version 6.0 of BIOS

  Hello

  I already had a version of BIOS 5.5 on my laptop [PSAA8] and everything was fine. Just to right a moment ago I updated to version 6.0 and Bluetooth does not work. I wonder where I could find the old 5.5 version, no research can make me so far.
  Any help appreciated.

  Hello Adam

  This whole thing seems very strange. Are you sure that the BT is activated correctly?

  All BT components are listed in the like before Device Manager?

• Portege R500 - Bluetooth PC card mouse not recognized

  I am trying to use a mouse with my R500 bluetooth PC card, but it is not recognized when I insert it in the PCMCIA slot.

  The light. I need to change any settings?

  Hello

  Usually, the PCMCIA card should be recognized directly after that it was inserted in the slot.
  There is no special driver for the PCMCIA. It s a BIOS according to the function.

  What you could do is to change the device configuration option in the BIOS.
  I think that it s on the second page in the BIOS.
  It s set configuration by OS. I recommend that you change this.

• Bluetooth is not recognized on Satellite Pro A100

  I have a Satellite Pro A100 828 running Win XP Pro.

  He is supposed to have integrated bluetooth but when I install the bluetooth stack, a message appears saying peripheral usb has malfunctioned and is not recognized by windows.

  In Device Manager, it is listed as an unknown device.
  I tried different versions of the bluetooth stack, but the same message still appears.

  Is there a software fix for this or does this mean that my hardware is defective? Would be grateful for any advice.

  Thank you.

  Hello

  where downloaded battery Bluetooth? And another question: do you have bluetooth never work properly? It would be interesting.
  Try another might be to download a Linux Live-CD and to check if the problem is perhaps more a hardware related issue.

  So, if you need an alternative download source then try this address:

  http://209.167.114.38/support/download/ln_byModel.asp

  Greetings

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• Bluetooth mouse stopped working & USB device not recognized error

  Laptop using Windows Vista

  I was using my bluetooth mouse when I plugged my mobile phone (via USB cable) in charge. I have done this before w/o a problem (perhaps in another USB Port, now that I think about it) but I did this time and I instantly lost the ability to use my bluetooth mouse and the "USB device not recognized" bubble popped up. Now, this window pops up almost every 10 seconds even with disconnected USB mobile phone.

  I went to bluetooth devices trying to pair my mouse w / new laptop and I can not. It's not show my mouse and when I go to Bluetooth settings and try checking the box (and pressing OK) under the discovery that reads "Allow Bluetooth devices to find this computer" it gives me an error saying that this is impossible.

  Help!

  The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this struck dead window device unrecognized USB is coming non-stop. Above tutorials did not help at all.

  Hey wsdp

  "The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this unrecognized USB device breath."

  ask them

  Walter, the time zone traveller

• both bluetooth and usb not recognized, couldn't able to start and shut down properly. The message of the usb not recognized

  popping up the message usb not recognized. It occurs when the network was slow and tried to disconnect internet directly unplug and plug the usb between mobile phone and pc. then it does not go away even system restore has been made. In addition, the bluetooth does not work. When I stopped PC properly but it will restart. at the same time when I start it up, but it does not occur. I closed again and then start again and works. However, it appears the message usb not recognized frequently.

  To start with, try running the Fixit USB, here http://support.microsoft.com/gp/hardware_device_problems

• My wireless 365 Bluetooth Module is not recognized by my computer... How can I be recognized

  I have a dell laptop windows 7-32 bit... the problem is that I have wireless 365 Bluetooth Module, but it is not recognized by my laptop... what should I do?

  Hello

  What is the brand and model of the Wireless 365 Bluetooth?

  Given that the other computer is too not to recognize the device, it is best to contact the manufacturer for a better support on this issue.

  It may be useful

• Bluetooth Lenovo S10e has stopped working - device not found / not recognized USB device.

  Hello

  For no reason that I know, installing bluetooth on my small S10e has stopped working.

  I noticed a few times when stop I had a "BTstackserver" does not message.

  I use the laptop to download regularly from a device compatible bluetooth.

  Today, when I go to connect, it says "bluetooth device not found".

  "Verify that your device bluetooth is properly connected and turned on".

  Hardware manual displays the config of LED and is correct, that if I press the "Fn" keys and "F5", I get the menu to turn on and off both the wireless and Bluetooth. I can turn on and off Bluetooth and wireless both with this menu option, BUT when I activate the bluetooth, I get the message 'one of the USB devices attached to the system is faulty or is not recognized.

  I deleted the Bluetooth installed and re-installed software by using the two bluetooth install files published on the list of drivers on lenovo S10e. Neither one works. I know that you need to install dir C:\DRIVERS once Setup has finished unpacking.

  I tried several other obvious things but without success. I also enabled "Bluetooth coopération" in the wireless LAN settings.

  All I can do now is get to the Bluetooth device under the keyboard cover and take a look at that? Anyone who has any suggestions until I get out the screwdriver? (The unit is out of warranty).

  

  I received my replacement bluetooth module and installing it, bluetooth is working again.

  I keep getting "BTW stack server" stopped responding when stopped down, but this does not seem to cause any problems.

  Too bad that original bluetooth module did not survive barely a month after the end of warranty date...

  I'm used to a greater reliability of Lenovo.

• Not enough space for music DB - but so car can be recognized on mac or PC

  Saturday my sansa (v2) e240 filled after recording radio then I got the message "not enough PACE for music db' - free up to 90 MB. This is not normally a problem I plug it into my mac and remove sufficient podcasts to solve the problem.

  However this time when I plugged the sansa, only the SD card would indicate all files and internal drive has prompted a message not recognized disk, inviting them to initialize or eject. The files are also not identified using XNJB or Windows XP (on my work laptop). I have also run the terminal and that the SD card is rated

  As with Windows security issues prevent me from transferring files on removable devices on my laptop, I need a solution that is simple for my mac. Initialization of the disk will be the solution or is it cause other problems?

  I had a good look in the ABI forums as well as forums of Sandisk, but it doesn't seem to be any similar incident posted or whatever it is in the manual or FAQ - please excuse me if I missed them.

  I don't want to go out and replace my sansa with an ipod - this is my second (my first overturned the idea of them being more robust than the ipod fragile by did not survive a fall on a ground (moquete) but if Sandisk continues to ignore the Macintosh so I may be, as security issues make it less and less chance to use Windows outside an environment very limited.)

  Thank you

  Put in the form of the Explorer had no effect secondary - recognized in the Finder on Mac back upward and running once the settings reset.

• MacBook is not recognized by parachuting on iPad

  Well well, boring as usual, he does not work for some reason any.

  MacBook Pro 15 retina "(mid-2012)

  iPad Mini (2013)

  Try to send a few photos from my iPad to my MacBook, the MacBook is not recognized by the iPad. The other way around is not a problem, I can see my iPad stated on the record of AirDrop on the MacBook and the transfer also works well in this direction.

  I tried several solutions, obv. Turning the air drop / disable / Bluetooth / Wifi, reset the settings on the iPad, iPad and MacBook reboot of the network, and so on, nothing works.

  The point is, maybe a month ago, everything worked perfectly in both directions, MacBook release the iPad and iPad to MacBook, just as I didn't expect. What I suspect, that is, after updating both devices with the latest operating system software, it probably stopped working as well.

  I can do to fix that? I just want to send you some pictures of the iPad for the MacBook using airdrop.

  Study it: https://support.apple.com/en-us/HT203106

• keyboard USB not recognized.

  Yosemite on iMac 27 in.

  Following a system freeze (screensaver is the alleged perpetrator), the usb keyboard is not recognized.  The mouse works in all ports and when it is plugged into the keyboard. IPhone recharges also through the keyboard. Recovered last time after several reboots and keyboard buffering in after start-up.  This time, no luck. Next steps?

  Hello

  I had EXACTLY the same problem.

  New iMac and USB keyboard. He works first and the iMac would stop then find the keyboard.

  I tried to reboot several times, but that did not always help. My Bluetooth mouse doesn't work. I get to the login screen and I can't type my password (because my keyboard is not be found). I get a message on my screen that the bluetooth keyboard is "impossible", when I don't have a bluetooth keyboard and my USB keyboard is plugged. I tried all USB ports, no luck! I just found a strange way around the issue. I used a keyboard extension cable to plug into the same USB keyboard and it works now. No logical sense... I hope that this might work for you too. Good luck!...

• Backup from Time Machine not recognized

  Hello. I have a mid-2011 21 "iMac 2.8 GHz i7 with 16 GB of RAM, running 10.11.4, El Capitan. My old 1 TB HDD (HARD drive) was giving me problems (grinding and draw and he had considerably slowed down), so I backed up the computer with Time Machine (which I did for years), and I bought a 1 GB SSD from OWC replacement kit. I installed it in the hard drive, location in my iMac, reinstalled the operating system, and the new drive is running great. No problems with it.

  The drive Time Machine is a disk HARD Seagate 2 TB external drive connected by USB to the computer.

  So, my next step is to transfer the old news of Time Machine in the new drive. I tried first Assistant Setup in recovery mode, but the Machine of the time in the car was not found (recognized). When I started normally, the drive of the Time Machine is visible on my desktop, and backup files appear in there.

  So, then, I ran on the drive disk utility. I could not launch 'repair' the disk as a whole (the button is dimmed when I click on the disc), but I fix the partition on the disk. No not found errors.

  Then I went in the Migration Wizard to move the files. But I had the same problem as before - Migration Wizard does not see the Time Machine drive.

  So. I tried to enter Time Machine 'Star Wars' show on the computer and dated backups appear on the right side of the screen, but then, when I go to look at, it does not appear that there is something in them.

  I kept the old drive HARD and (in panic), I ordered a box to put the old drive, and I'll try to get the files this way. But, I still want to use the files on my Time Machine drive.

  At this point, the only thing I have to save my documents, my pictures and family videos and music. If only I could get in the 'Home' on my Time Machine backup folder by clicking on the player, I will manually install the files 'Desktop', 'Documents', 'Movies', 'Music' and 'pictures '. I don't know if this is possible, and I have never done this. I don't like not everything 'Applications', or anything else, so I'm willing to do the grunt work on those reinstall the old way. Can manually install you the items in the folder to the home page of Time Machine in another drive?

  Any advice you can give literally will save me! I'm kinda at a loss on what to do. The last time I used Time Machine to do this (to transfer the files on the iMac 2011) it worked like a charm.

  Thank you! Clay

  See if it's of any help. Section E

  http://pondini.org/TM/troubleshooting.html

  https://discussions.Apple.com/docs/doc-10081