Card dead mother want to recover hard drive data

Similar Questions

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recover hard drive again?

  I read this topic on the forum earlier today, but it was 2009 when you post... now on 2015. I wanted this HP about 1.5 years have released 1 year extended warranty purchase and is it has not been renewed, and 6 months later H.D. click on clac dead. I don't know how these PC brand to do... the brand specfic coding of their substance; not their fault for her, but she didn't we customers do favors. So, the question is when I buy a new H.Drive will the recovery installation dvd, or what?

  Thanks, Dovahkiin

  Electronics is fragile, they can at any time, could last year 1 how 10 years depending on how lucky you are.

  Your new hard drive can be any manufacturer of your choice.  in your case, there must be at least 1.5 to and SATA 7200 RPM if you wish your recovery discs to restore your system.

• 1260sf 6: 6 - 1260SF envy want: replacing the HARD drive

  Hi all

  I had all sorts of problems recently with my laptop so I ran a chdsk and it seems that my HARD drive is damaged and needs to be changed as soon as possible.

  I am running Windows 7 64 bit on a desire 6-1260SF - Ultrabook 15.6 "- Intel Core i5-3337U (1.8 GHz) - disk HARD 500 GB + SSD 32 GB - RAM 8 GB - Intel HD graphics card

  Apart from the fact that I am very disappointed in the sustainability of the equipment (the laptop was purchased only 18 months ago and I still use a laptop cooler), I was wondering what mistakes I need to avoid buying a replacement HARD drive.

  I did not open the laptop yet, but the faulty HARD drive is a Hitachi 500 GB 2.5 "SATA Hard Drive HTS545050. That being said, here are my concerns.

  (1) what should I look at when I get a replacement to ensure that there will be no compatibility issues?

  (2) can you name a few good quality of the HARD drive, I could go to replace (brand, size...)?

  (3) at this stage, an SSD instead of HARD drive editing would be a good idea (to condition already, I upgraded my RAM from 4 to 8 GB)?

  I want minimum hassle and without unpleasant surprises when I buy the replacement

  I get a compatible drive and plug it in, I'll be able to use it to off the bat and boot with USB to install Windows or are there (unfortunately) some steps involved in the preparation of the new drive?

  Thanks for your help.

  What has happened is that the acceleration function has stopped working and you see how slow a drive 5400 RPM is alone. But it is still the startup for Windows, right? Have you installed the Intel Rapid Storage program from the driver download page?

  

  You will get something like the above and you must make sure that the new hard drive is "accelerated" by the reader of the WSSD.

  This is done with the buttons 'Manage' and 'speed '. It is done in Windows and you can not set up through the RAID BIOS screen.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to export pictures from a sd card to lightroom and and external hard drive at the same time

  Hello

  Is it possible that I can export my photos from my lightroom cameras sd card and an external hard drive at the same time so I have pictures original/master in both places

  Thanks in advance

  Tracey

  Hi Robert!

  Looks like you want to make a backup during import. If this is the case, you can designate a different location for a second copy when importing.

  

  1. Check the mark a second copy of box in the management of the files Panel and choose your external drive in the menu drop-down
  2. Then you set regular destination of Lightroom in the Destination panel.

  However, if you mean that you want in the foreground images in Lightroom, but have them physically located on an external drive, then all you need to do is choose this drive in the Destination panel. Lightroom Catalog can be on a different drive.

  I find it useful, however, to use the automatic backup in file management Panel in case.

• Satellite L670 - 1 DG PSK3EE - I want to insert HARD drive in the CD/DVD drive Bay

  Hi all

  Before you begin, sorry for my English, I'm french.

  I have a Toshiba L670 1 DG (PSK3EE) with a 500 GB HARD drive.

  I want to put this disk in the CD/DVD rack with an adapter and put a 64 GB SSD into the HARD drive slot.
  (I do not use the DVD player, I will make it external).

  But I don't know where I can find this CD/DVD rack HDD adapter, I searched on eBay, but I think that it is not
  for my Toshiba...

  Can you help me?

  Concerning

  Arnaud

  Hello

  I put t think it's possible, here, for this series of laptop.
  As far as I know the laptop must support a Slim Select Bay to use something like Slim Select Bay adapter HARD disk * PA3134U-2CTE *.

  But just a few special Toshiba Portege and Tecra Tecra M1, M2, M3, M4, S1, S2 support this

• I want to spend hard drives...

  Now, I know that I can take a hard drive and stick it in a computer and it will work. I just bought a new computer and want to give my old to my daughter. I don't have a huge drive hard because I already have one, she doesn't have a need and I don't want to move all the data or reinstall all programs. Both are under Vista. Do you anticipate problems with authentication of Vista because I will be switching hard drives? I don't think I have a copy of smuggling and stop the update because I've changed hard drives around the computer.

  Hey Red Ninja,

  Welcome to the Microsoft Answers site!

  If you change hard drives, you could get a prompt for activation due to hardware changes. In some scenarios, you will not be able to start until the
  Office normally.

  Visit these links for help of activation:

  http://support.Microsoft.com/default.aspx/KB/940315

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  For the boot problem, you can perform a startup repair. Access the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

  Kind regards
  Support Microsoft Afzal engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You want to add hard drive XP on my Vista computer.

  I have Vista on my computer and you want to add XP to use an old program. The XP is on a computer sooner I could add the drive to the computer later?

  Someone said I need to partition the HD on the Vista machine and install XP on it. That doesn't seem to be difficult to achieve. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

  If the XP drivers are not available for your model, forget the idea.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  N °

  Installing XP will have different drivers from the motherboard installed on the old hard drive; so it would probably not start.

  It would take a clean install (if XP drivers are available for your newer computer), according to the XP license:

  If XP was preinstalled on your computer, it is classified as an OEM license and is not transferable.

  The license of XP OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of XP at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this instead:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but

  See you soon.

  Mick Murphy - Microsoft partner

• HARD drive dead, retrieve files from external hard drive

  Hi all, my HARD drive is dead, I installed a new. I have a complete copy of my system to an external drive, including my o/s, it was created using Vista upward.
  I cannot now access these files or the o/s.
  How can I use to load all my data on my new HARD drive?

  Hello stan49,

  ·         What type of backup that you created on your external hard drive?

  ·         What happens when you try to restore the data on your computer?

  If you used the Windows backup utility to create a backup on your computer, you can check the link that will give you information about how to restore from a backup below:

  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• He had to recover hard drive due to a virus infection

  I have dilemma, my computer has a virus

  I had a docking attached to the computer via usb port and the hard drive that was in it, stored all my DVDs that I saved 2 terabyte of hard drive...
  When the main computer had problems, diagnostics windows asked to do maintenance on the hard drive, the cause was critical errors on the C:

  not the g: drive port docking station...

  in any case I said what the heck, of course... :(
  now, I had to redo almost computer reinstall windows etc...

  My drive docking port was still listing all my files once the new installed, then all of a sudden...
  I came one day at home and instead of see all 450 of my DVD I had saved on my drive but now only 3 files...
  These are the 3 files...
  1st.) MpMiniSigStub.exe
  (2.) mpasdlta.vdm and the
  3rd.) 1.101.1291.0_to_1.101.1523.0_mpasdlta. VDM._p

  When I do the drive properties it always show me on 2 TB hard drive I always only 250 mg hard drive space left
  used 1.8 to is already space.

  still on the disk, so all my files/movies?
  I can't get access to them?
  is there a way I can recover my files?

  or I'm screwed?

  Hello

  Method 1: Please follow the link below:

  Check a drive for errors:
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 2: You can use your favorite browser to review for a third party recovery tool which may help you to recover your data.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Recover hard drive - laminated thickness - (ESXi5.1)

  Hello.

  We recently made some major new buildings on our Windows server 2008R2.  We know have an E:\ drive that does nothing, but is 500 GB.  There is nothing in the E:\ I need to keep.  The problem is the former Administrator put in place the disc with thick so I can't retrieve the space.

  My plan to recover the space allotted was:

  1. in the server VM disk management, I would like to remove the drive.

  2. on vSphere, I then pull out and remove the hard drive for this particular virtual machine.

  My assumption would be that the 500 GB would then back up to Datastore1.

  Please let know us if I missed a step or steps or please tell me if I'm totally wrong.

  Thanks for help.

  Hello

  Here are the steps I followed to get the square of the unused space in virtual machine to the database.

  1. remove the disk volume, 2. Make the drive offline, 3. Make a right click on the VM-> change settings of-> remove hard drive also choose the option 'File Delte from data store'-> click ok

  

  The space will be reclaimed within the data store

  Concerning

  coolcrushier

• H8-1534 how to recover hard drive again

  PC is h8-1534 envy... Hard drive died bought new drive and hang it up, started to recovery cd. The cottage 5 options to chose the recovery, and it happened to 3 options... (1) collect (2) Backup (3) contact support. 1 and 2 were not high informed only contact support who since there no OS on hard drive, anyway he said out of paperwork for support. I tried to click on them in any case, but nothing. I went to the Bios and new drive was there, but really no option for me.  Rebooted and same a lot, so I took another option to reset the PC, but it didn't of course. I don't know what to do.

  I was told on the HP forum I couldn't great reader, but not smaller, and since the 2 TB was less expensive $$ then 1.5 I bought it.

  New HD toshiba 2 TB sata 3.0 7200 RPM

  "Former was Seagate 1.5 to" ""

  Thanks for any help Ken

  Hello

  You were already using successfully your HP recovery discs before this instance? The new HARD drive is connected to the same port SATA (SATA0) the original HARD drive was connected to?

  HP sold this PC in two geographic regions: the USA and the France.

  The number of product of the USA is Envy h8-1534

  The number of the French product is Envyh8-1534ef

  The USA product offers a DVD Recovery Kit four Win 64 8 build No. 13NA1RR8601. This build number should be located on the bottom of your Tower. No recovery kit is available for the number of French products.

  If you have a h8-1534 then a recovery kit is available here.

  You are under warranty? Contact HPfor replacement HARD drive if you are in warranty. I bought four HP from the PC to the HP USA Store and all have come with a two year warranty.

  Explain your problem with recovery disks, you did. HP support should be able to help. HP will support your PC with all the components in stock.

  Jaco

• Satellite Pro A300D - How can I recover HARD drive?

  HI Newbie here.

  Put on the machine this morning and it just says: disk error - press DELETE Cnt, was talking to the guys at PC World and they say to restart, and then press F8 I have heaps of times, but I can't access the drive recovery partition.

  I have a Satellite Pro A300 with Home Prem Vista

  Any help appreciated.

  Thank you

  Paul

  Hello Paul

  Well, are not good news but it shouldn't be a problem to solve this problem.

  You can go into advanced with F8 boot menu? If Yes, select Repair my computer and follow the instructions on the screen. All that s. So, you can use HARD drive recovery.

  If you can t go into the advanced boot menu you should use the Toshiba recovery disc. You burn it? You need to start only with her and Windows will be reinstalled.
  If you don t have the recovery disc, you can order one at Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• 20-d113w want to: replacement hard drive

  Hi, I looked around the Board for instructions on replacing hard drive. I intend to replace the original sata drive 1 TB with a seagate 1 TB sata3 drive. I know this is probably a stupid question, but just installing the new drive and run the recovery software, or something must be done again disc before I run the software. Thanks for any help you can give

  If you reinstall from the recovery discs set, it will not make a difference.  If you use a cloning software, it may depend on the package.  If you need to reinstall using a Windows disk, it should be able to themselves deploy by asking the user questions.

• How to recover the program in my Start menu: error message came. loss and corruption inaccessibility and disc error and hard drive data

  I have error message came. hard drive error and inaccessible hard drive and data corruption and loss.

  All of my Start menu disappeared. There is nothing in my files everything is empty.

  This is the area of windows recovery.

  Hi shobhanajoshi,
   
  -What, exactly, is a transcript of the error message that you receive?
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Method 1: As a first step, check to see if you can boot mode safe and you do incur all these problems in Mode without failure.
   
  Check out this link to start safe mode:

  Start your computer in safe mode

   
  Method 2: Run the troubleshooter from the link given below and if it helps to fix the problem:
   
  Difficulty of broken desktop shortcuts and common system maintenance tasks
   
  Method 3: Scanning of auditor of system (CFS) files on your computer and see if it helps fix the problem.
   

  Check out the link for more details below:

  How to use the System File Checker tool to troubleshoot missing or corrupted system