card problem mother c mos

Similar Questions

• Need advice with card problem mother strange network card.

  I have a question that is probably some kind of motherboard or power supply problem.
  The card connects with 72.2 Mbit for my wireless router mbit and 100 with the Integrated NIC.
  
  Right now I have bars of 4 out of 5 on the scale of connection and the router just outside the door, but when I try the card against the bredbandskollen.se it never give me more then 4 Mbps download and upload of 16-20. For now, it's 1.6 Mbit download and 8 Mbits upload both with radio and network card.
  
  All other computers on the network will download speed normal 25-55, laptops and other Pavilion with GFX and solid power supply.
  
  I even went up to buy a wireless extension, which can also be used with the thread, but the problem still there never more then download 4-5 Mbps.
  
  I have warranty still, but I feel stupid about the problem because the card is connected with the right speed to the network.
  
  But the rate of download and upload is far away.  And I'm sure that they will conclude that it is connected to good speed when they try against a router, but that's all the download and upload that seem to simply broken. I reinstalled OS even tried other external wireless card but the problem persists.
  
  Would it be the 500-112 eo with a graphics card hogging the PSU, well she was offered with this card, but the motherboard is basically a small size for laptops?
  
  Anyone else having a similar problem with the 500-112eo Pavilion
  
  I should let him return for service, and what could cause this kind of strange problem?

  Hey well today about 2-3 months after the end of the one year warranty, I'll watch some hockey. When I look at computer it seems stop by itself. Strange, I think push button / stop and here a big bang when the flaky PSU finally had enough.
  
  I don't know what to say that it is a shame that HP sells undersized PSU:s in their computers. I knew from the start that there was something strange going on because of the bad connection Wifi, and how it seemed dependent on how many USB devices.
  
  I was smart enough to not send it to HP technicians, it probably saved me 100 euros. Because they would be claimed I had a faulthy complain and charged me. How can you prove there are issues of power.
  
  I'm just glad the monitor didn't die with the 500-112eo pavilion, because it looked like a shot and took the fuse 10amp in the room with her. Tried to move the HARD drive to the external firm to save a date he sounds like a sound signal in agony and refuse to spinn upward.
  
  So I guess that the PSU has HARD drive, mothercard, UC and memories with her on his farewell greatness.
  
  3 years and I would not protest, but 15 months HP should be ashamed of the technician putting this motherboard with this PSU and even more to sell the thing for 500 euros.
  
  Shame on you.

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• Start Windows Vista or graphics card problem problem

  OK have a problem with Windows Vista here. Its pc of my grandmothers, only a year or two. (office) My brother went in safe mode and came back with a restore point. He said it worked, but now, the screen goes black trying to open windows.

  What's happening...
  It starts showing the status of the drives and ram memory and asks me if I want to install through F10 (which works) then it goes to the "Windows was extinguished not correctly." And it gives the offer of
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Normal windows startup
  The security mode through the long load upward and then a black screen and an arrow of big white mouse I can move.
  Normal windows opens with the quick bar Windows... then nothing. Just a black screen and a white mouse arrow. Of Cntrl Alt Del does nothing and only thing that makes something happen hit SHIFT 5 times. It causes a beep and a window opens asking if I want to use StickyKeys. Other then that I had nothing.
  I'll try to find a Windows Vista dvd to repair.
  Part of me wonders if it is a screwing display driver. As I said some stuff shows up to save for windows, so it's a small chance, but to think what anyone.
  Care,
  Windows Vista Edition home premium
  HP Pavilion p6110t

  Hello

  If you start Windows, see a desk white or black with no icons, video card problems are the most common cause of this problem.

  Try the following troubleshooting steps:

  Method 1: Access your computer and reinstall your current video driver

  Uninstall your video driver and allow Windows to re - install:

  1. click on start and type device manager in the search box

  2. click on device under Programs Manager

  3. Select the video driver and uninstall

  4 restart your computer to allow Windows to reinstall the driver

  Note: Once the driver is reinstalled, you may need to restart your computer to complete the installation. In addition, you will also need to adjust the resolution of the display to its previous value.

  Method 2: Turn on the video resolution (640 x 480) and then update your video card driver

  If the resolution of the registry problems does not work, perform the following steps to activate the video resolution:

  1. Click the Start button, click the arrow next to Shut Down and then click on restart.
  2. Press F8 before the Windows logo appears.
  3. In the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.
  4. Log your computer with a user account with administrator rights.

  If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information,.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Start your computer in Mode safe mode and disable your video card

  If activation low resolution and then update your video card driver do not work, perform the following troubleshooting steps to disable your video card driver:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  When your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 5: If these steps do not resolve your problem, try to boot mode safe again and follow the steps in the system restore to restore your computer to an earlier point in time.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Note: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  If this still does not have the problem, contact your computer manufacturer or the technical support for further assistance.

  It will be useful.

• Card problem multimedia blackBerry Z3

  I use my media card in BlackBerry z3 and he said that it could solve media card problems summary abd will be quickly deleted what I can do

  I have format my card many times but the problem occurs again and again that I have to change my card while this problem reoccur

• Screen flashes different colors and freezes at the same time, there is a video card problem?

  When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
  Any help would be greatly appreciated.

  EDIT: I forgot to mention that it is a HP G62 laptop.

  Hello

  Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

  Let me know if this helps you.

  Kind regards

  BearPup

• HP Compaq Elite 8200: Running a Radeon HD 5850 on a GPU card HP mother, 1495

  I will stay at the home of a relative for the next few months, and I was wondering if it is possible to install my graphics card (Radeon HD 5850) on their pre-built HP computer. I won't be able to physically test the situation until it is too late to make my card more, so I wanted to check first.

  The model number of the computer is XZ971UT #ABA, and his mother is a HP 1495. This Board has a PCI-E slot? Do I need any special driver to install an AMD GPU? And the card will physically fit in the case?

  If you can answer any of these questions, it will be a great help. Thank you!

  @_eternal, welcome to the forum.

  Here is the computer Service and Maintenance Guide .  From the 43 Page is a list of supported video cards.

  HP Small Form Factor computers require a low profile video card.  Here is an example of a card that is recommended for this.  In addition, I don't think that the power supply unit (PSU) in the computer either enough power to run if he would do.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Problem upgrading the h8-1409 HP Envy video card problem

  Hello.

  I just bought this machine and it has a good processor and ram good, but it comes with a card missing video (HD7570).  I want to upgrade the video card at one of the best maps I have of my old machines (Gigabyte GTX 660 ti and an Evga GTS 250).  When I install one of these cards but, I get no video output.  I can hear the initialization of the system and the hard drive works, so everything seems fine here.

  This machine comes with a 460W power supply, which should be enough to run one of these cards, but no go.  In order to exclude food, I tried on a secondary market, OCZ 600W PSU, but got the same result.  Two cards work in my old machine, so I know that the cards are good.

  The specifications of the main Board are here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03132942

  As far as I know, it should work.  Is there something I'm missing?

  Thank you very much.

  Hello

  Only use one video card in your PC and make sure that it is installed in the PCI-E x 16 slot.

  Boot in the bios (ESC and F10) and go to security topics. Try each of the topics and search a secure Boot Configuration.  If it exists, then see if Secure Boot is disabled.  A poster said that secure boot disabling enabled the installed video card. I have not tried this on a HP active UEFI motherboard but I know that it isn't a problem with another mother UEFI card that I use.  Your mileage may vary.

• Built-in SIM card problem

  Anyone heading the question where they took contact with care of apple and the representative on the other end does not have the product you are calling for?

  I recently had to replace my iPad 9.7 Pro at a local Apple store warranty. There was a glimmer of hope in the quadrant display cooer right. It was not extreme, but once I have the sewing, my eyes always went straight to the it later. Given that the unit was only a few months, that I wasn't old too satisfied to "just deal with it" then I won him in and ultimately they replaced. There is one thing that I like Apple, they really take care of their customers. Then I proceeded to drive home and get on the phone with AT & T to activate it, because the iPad was originally purchased at home and put on my plan.

  After getting nowhere with AT & T customer service they transferred me to Apple Care because I didn't have an ICCID under settings/general/to words. After connecting the Apple Care representative I explained the problem. To my surprise, he had no idea on the SIM Apple integrated and kept asking me where was my old SIM and I need one to get cellular service. Now, I knew that this was not correct and I've tried very carefully explain that there is no SIM external it was enabled on the embedded SIM card, however, they guy fought me on it and sounded quite confused throughout the call. I also tried to activate it under the iPad option settings/cell/Add cell phone carrier/transfer again. This option does not work for me, because it has to do with a different plan type (I have or the representative didn't know) he says also my user name and password are incorrect, but it wasn't. I logged in full on the site without problem. As a result of this he told me to change my password for AT & T and that has not worked, it wouldn't have worked anyway, but now I know, it's just so that you can see the traces of events here. I was then left on hold for 15 minutes be say I have to call my service provider.

  Just for the forum of reference for the iPad all Pro (to the United States at least) are made with a built-in SIM card, but also have a nano SIM tray for travel abroad. For those who don't know no way "embarked", it is built in the electronic device and is not removable. Why do that and do all sorts of confusion? It is designed to allow a smaller unit and is supposed to give more options for the selection of a carrier.

  To resolve this problem, I took my replaced iPad 9.7 Pro at my local AT & T store the next day (today) to configure the built-in SIM card. They had me past in less than 5 minutes. Namely, if someone runs into his question, you need to tell the person you talking if theres no ICCID then its either one wifi device or if you are using a device with a built-in SIM card. They will have the provision to the CSN, which is a very long alphanumeric number located in settings/general/to comments made by verses the low only with the IMEI (obviously).

  I'm just surprised that the 'experts' Apple Care had no idea what the hell I was talking about. I am an engineer 'EM and work on industrial equipment. Also, I have a technical support for hardware, software, networks and applications, so I have a bit of history and know how to get my message. I too am a former user of Windows and Android who migrated to apple for its ease of use, robustness and quality, and outstanding customer service. I now own the iPad Pro, mini iPad 9.7 4, Apple TV (3rd generation) and Mac Mini (late 2014). All of which are excellent products that I use every day and that he loves her. I also participates actively in the public beta program Apple with iOS 10 and Sierra of MacOS. Apple, if you listen... Take note that when a supervisor does not know the iPad Pro is manufactured with a built-in SIM, theres a problem.

  What do you think?

  * Comments *.

  'Use the form below to send us your comments. Read us all the comments, but please note that we cannot respond to the comments you submit. »

  http://www.Apple.com/feedback/iPad.html

• HP Pavilion P6 2055sc: Cant enter BIOS because graphic card problem.

  Hey!
  So for the moment, I try to turn on virtualization, I m able to boot the computer into windows but do not enter network boot (anti-spam f10 key before the HP loading screen) but because of the past problems, I struggle to get into the BIOS.
  It all started when I got a new (Asus Geforce GT740) graphics card and this caused my computer not being able to start, without forcing in the network boot.

  But like I said, when im trying to get into the BIOS, it gets to the screen where it says "Press Escape to access the Boot Menu" which, at that time, it ignores when I press ESC.

  I tried holding it, I tried all the keys F1 - F12, but nothing makes a difference, so im wondering if there is a way for me to get into the bios and work around this problem.
  I looked for so updates to the BIOS, but I couldn't find one so far.

  @alilleland, welcome to the forum.

  The reason for which the computer would not start with the GT installed 740 is, it requires UEFI in the motherboard instead of a standard BIOS.  If you always use the GT 740, I suggest to withdraw to see if you can enter in the Boot Menu.  You can do that by typing the ESC key as soon as the computer begins to start.

• On the Satellite 5200 903 graphics card problem

  Deploy a 5200-903 Toshiba Satellite. A few days ago, I have a problem with the display. All scratches and other
  unknown elements on the screen. It's the graphics card (FX GO5600). Read about it in other forums.

  My Question: Is it an embedded chart? And what do you think, is it profitable to change the broken component?
  I mean if the graphic is on board, I have to change the motherboard together.

  Thank you very much for your answers!

  Hello

  It's look like that there is a problem with a graphics card. Can you check connection of the external monitor to the laptop?
  The graphics card is integrated into the motherboard, therefore, you need to replace the whole motherboard.

  It is quite expensive, and sometimes it is better to buy the new computer

• Excite At10 Pure and 64 GB SD card problem

  Toshiba Tablet excites pure at10-a-104

  SDXC UHS - I class 10 64GB Kingston memory card (gold edition: 90 MB/s read, write: 45 MB/s) format exFAT
  About 45 GB of images on the card.

  When I use android apps for photos of presentations as QuickPic or typical Gallery of the Toshiba tablet, aplication often completely stops (gel, suspend) Tablet (not all functions work, I have to reboot the Tablet).
  I tried to use other applications to presentations of photo from the game of Google but effects was even worse.

  What is the problem. I have to:
  1 tablet complaint service (it security)
  2. complaint of memory card (it security)
  3 configure the memory tablet to special (?) options

  I'll ask for help.

  Post edited by: Petry

  According to the specification of Toshiba page that I could find on the internet, the micro-SD card slot allows you to store and share your photos, videos and large multimedia files, using SD cards up to 32 GB
  Therefore, the question could be linked to the size of 64 GB SD micro card it s not supported

• Intel HD under LightWave 3D graphics card problem (dongled & licensed)

  It seems that graphics Intel hd graphics is a little difficult display my NewTek Lightwave 3D 3D interface.
  Indeed, even with the update "specifically" one dedicated Windows 7, well the "interface will appear, however, the orthodox view remains gray.
  To my knowledge, no installation problem, recognized dongle, only admitted entering the serial number correctly.
  Tell me know maybe handling the most appropriate to solve my problem of display.
  NewTek LightWave 9.6.1 can work with 64 MB dedicated memory.
  so maybe it would be good to allocate more memory to the graphics card?
  I don't know am not coders.
  Thank you very much for this information.

  The version pirated Lightwave 7 configuration running on a pentium2 277 mhz 32 MB of ram and graphics card s3 Virgin 4 MB.
  I do not really understand hardwares. ("_")

  After reading your ad I m wondering if you are on the right place here.
  Please don t get me wrong, but don't you think that your story has something to do with Toshiba laptops in general?