Card problem Qosmio F30 PQF32E-WI-FI

Similar Questions

• Unable to save since the sound card of Qosmio F30

  Hello - I have a Qosmio F30 standard with integrated sound card but can't direct recording of the map (use of Audacity).

  I have Vista Home premium, but try when it recording using the microphone and picks it up plenty of background noise.
  Have sorted the line in option to record from a tape, but recording music online streaming is beyond me.

  Can anyone help?

  Hello

  to record online music streaming, you must use a special program ripper that rip´s the part of the flow of output and written on the disk, because it s not possible to record sounds that are IN the system.

  I Don t know if this could help you-> http://all-streaming-media.com/record-audio-stream/

  But check and maybe you can find a solution for you. ;)

  Welcome them

• Card of Qosmio F30-140 is scalable?

  The Qosmio F30-140 comes with a Nvidia GeForce Go 7600 equipped factory.

  Hi mate,

  Unfortunately, the VGA chip cannot be replaced since it s "wired" on the motherboard, which means that the GPU is soldered on the motherboard.
  If you want to replace it you will have a soldering station, which costs probably above 13,000 bucks and a team that knows in soldering BGA (http://en.wikipedia.org/wiki/Ball_grid_array) and maybe you have plans of engineering for the motherboard and and it wouldn't hurt to have at least two programmers for the creation of a new BIOS, which implies that you have some connections to Toshiba Japan because the BIOS is not a FRIEND, it s one or Phoenix BIOS toshiba which has its own characteristics and I Don t know a soul who managed to enter the structure of such a Toshiba BIOS.

  I hope I was able to clear your mind. :)

• Qosmio F30 and Win7

  Hello

  This my first message,.
  I just purchased a Qosmio F30 second hand, I find it difficult to install Win 7

  Please help me I need drivers
  Thank you

  I checked the support Toshiba in http://eu.computers.toshiba-europe.com page and some Win7 32-bit drivers are available for Qosmio F30 PQF32E.

  What Qosmio F30 you exactly (F30 - xxx)?

• Problem of graphics card on the Qosmio F30

  My laptop is Qosmio F30-140 (PQF32E).

  After that I installed a Wolfenstin game and run the laptop shutdown suddenly, and has not responded and when I restart, it shows Blue Screen of Death (BSOD).
  I thought it was the RAM. I checked and it is fine. I have re-installed Windows Vista Ultimate 32 bit, but the BSOD problem is always shown and I can t reach or get into windows.

  I ve changed windows to Win7 32 bit and I entered the windows and all is well but when I want to install the driver for my graphics card and restart the laptop the BSOD appears again and I can't get into windows.

  Please advise me. Is - this hardware problem or only the registry must be amended :(?

  Hallo

  Have you tried to install your Qosmio laptop using supplied Toshiba recovery CD/DVD?
  If please test and let us know what will exactly happen.

• Re: Problem with Qosmio F30-140 VGA card

  Hi all

  My Qosmio F30 suddenly developed a green lines/pixels on the screen. The same problem exists even before logining windows.
  The card (nvidia go 7600) video under the device manager has a yellow triangle with an exclamation mark inside. I tried reinstalling the VGA driver, but nothing has changed.
  I think it is a hardware problem (GPU), but I don't know if there is anyway to fix it. Please notify.

  It's certainly the hardware problem. What you can do to confirm this is to connect external monitor to your laptop to see if the same thing will happen. If so, the GPU is defective and if not display's troublemaker.

  What you can do to solve this problem? Not much. Material exchange is your only solution.

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• Upgrade of Qosmio F30/695LS (the slot with a weird module hard problem)

  So I try to upgrade my laptop, its starting to show his age in this world or the very rapid evolution out. I want to add two 1 GB RAM cards. I read somewhere that 2 GB is memory max does anyone know if it is in terms of upgrade only or including 512 who comes standard? The cards must also be 200 pin DDR2 SO-DIMM, but I don't know how fast that is capable of confronting the laptop, I can put 800 MHz in there? Now, I had read that the manual except that it's like the laptop in Japanese! I'm also trying to add a second hard drive, there is a second location, but... There's something seriously weird sitting in there! Here are some pictures to help identify it:

  [http://farm4.static.flickr.com/3230/2791686827_13b6e68776.jpg?v=0]

  [http://farm4.static.flickr.com/3205/2792538470_2d6fed3710_b.jpg]

  For me, it seems to be a kind of a dummy module, but like I said I don't know noty - whatever it is, it causes a lot of problems - it can not be removed from the underside of the laptop, which means I have to open all and pull it out of the bottom of the keyboard (if that is even possible?) and I don't want to not pull something important on accidentally! Thus, any information would be very useful!

  Hello
  If you want to upgrade the RAM for Qosmio F30, then you can use SO DIMM DDR2 533 Mhz PC2-4200

  MODULES MUST BE ORDER AND INSTALLED in PAIRS for Dual Channel mode.

  so, you can order the 2 GB kit (2 x 1 GB).

  You must remove the old module 512 of your laptop, you can also see the speed written.

  and on the strange object sitting in the slot of the HARD drive, I think it's a kind of wireless or Bluetooth card because there is an aerial cable attached to it, you can try to unplug the card and turn on your laptop and see if there are wireless devices or Bluetooth removed from the system.

  also try to find what is written inside this card, a reference number or Description and post it to us.

  This laptop sold in Japan only and that the specification is different from that which is sold in europe.

  Kind regards

  Reaver

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• Update BIOS on the Qosmio F30 - ACPI problem

  I've updated the BIOS on my Toshiba Qosmio F30 - 140 and I have issues with the management of ACPI.

  When I try to run Ubuntu 9.04 or 9.10, I see constantly typed characters - "^ [[B ', which cancel all important processes.
  When I add "acpi = off" option to GRUB the problem seems not apear, but I do not have access to important features (like changing the brightness of the display). How to solve this problem?

  Hi Kojot89,
  first: "never touch a running system", but you already know...

  with this new bios, you have enabled some features of the motherboard...
  Try this:
  -turn off acpi in the bios mode, if possible
  -patch your kernel to use the acpi features
  - or disable the use of the features of acpi by boot-cheats

  as you say the problem doesn't exist when starting with "acpi = off".
  display brightness and the cooling of the processor are the main features of acpi to save energy, if your kernel can not handle
  check_acpi_ignore = 1 might be a way to make it work

  way the easiest way is to reinstall the system...

• Qosmio F30 - problems of its Vista/7 x 64

  Hi all.

  I installed Windows 7 (RC version) on my laptop. Installation was successful. After this OS has found and installed all the necessary drivers (audio driver is installed too, I checked it). Now I have such driver: SigmaTel High Definition Audio CODEC v.6.10.5866.0. But I can't hear any sound! I tried to launch music on my laptop, all the levels in the Control Panel window "Sound Devices" are activated, and indicates the maximum volume level. But, again, I cannot hear any sound. I don't understand what is the reason for this.
  OS shows me that everything is OK, but I can't agree with it. Can you help me? Work on PC without sound is not beautiful.

  It seems that the speakers are turned off... As if they have disabled by Fn + Esc key combination... How I check it? And how do I solve my problem?

  I noticed the same thing on my Satellite Pro P300. After installing Win7, everything was OK.
  I found the sound driver as advised by Win7 update, but after install driver sound was gone.
  So I think that Win7 works much better as bare BONES. :)

  In any case, for now Win7 is not supported and are all you can find some BETA drivers listed on the page of Toshiba U.S. support but not for all and not for the old as your Qosmio F30 laptop models. FN functions work only with utilities and tools specific to Toshiba. For Win7, such tools and utilities, do not exist and cannot be downloaded.

• 64-bit RAID problem with drivers on the Qosmio F30 during installation of Windows XP

  I am trying to install Windows XP 64-bit on my Qosmio F30 - 140, so I used Windows Vista 64 - bit RAID drivers. Installing windows has loaded the drivers with USB - FDD success, but as soon as I clicked on the C: partition to install the windows and started Setup I received the following message "Setup cannot copy the file: KR10N64.sys". ""
  Please notify.

  Download the driver again and try to put it on another clean formatted disk

  put all the files on the root of the floppy

  and try to reply to this post ;)

  Post edited by: Reaver

• Qosmio F30-112 - small strips and dots on the screen

  Hello

  I need help, my laptop (Qosmio F30 - 112) have a problem.
  When I started it scratch on the screen and flashes.
  Then if I try to reboot it works, but not normal; still have a small scratches and dots on the screen.
  I checked it on the Device Manager NVIDIA GForce with a yellow mark.
  I tried to uninstall it but nothings happened.

  Please some body help me what to do in this case?

  And if you have to replace the VGA CARD, is it possible to upgrade? and what (NVIDIAGforce) parts are compatible for my laptop (RAM memory upgraded 4 GB 320 GB hard drive and windows 7 Home premium)

  Thank you
  rtmasagca

  Hello

  Have you tried to install or update the display driver?
  Please check this because the yellow exclamation mark in Device Manager may mean that the display driver is missing and so the graphics card does not work properly.

  Otherwise, it could be a GPU problem.
  This can be tested easily; connect an external monitor and check if the same stripes, points would be visible on the monitor that is eternal.

  If Yes, then it s certainly a GPU problem.
  In this case, only the replacement of the motherboard might help.
  Also, upgrade is not possible.

• Qosmio F30-112 drivers for linux

  Hello

  I need help. I have a Qosmio F30 - 112 and I have linux on my pc. I need drivers for the graphics card.

  Thank you

  Hello

  Sorry, mate, but Linux not taken in charge by Toshiba officially. This means you need to do your own search in Google or on other forums asking if someone has solved a problem of graphics card driver.

• Qosmio F30 starts with blue stripes during Vista boot screen

  My Qosmio F30-114 runs for years without problem with Vista Ultimate.

  In recent days, there is a huge problem.

  The Qosmio starts with blue stripes during vista boot screen.

  So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
  For a brief moment, I was very lucky.

  After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.

  What can I do?

  The download section of toshiba has no drivers for graphics card.
  And really... I wonder - how it works every year without problems...

  Someone at - it a solution?

  thanx

  toshibalover ;-)

  Hello!

  First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.

  I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye