card usb atsc hdtv problems

Similar Questions

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• format micro sd card acer liquid e2 problems

  Hello I have an acer liquid e2 smartphone running on android jelly bean 4.2.1

  recently, I bought a micro sd with a capacity of 32Gbs of kingston card

  at first glance, everything worked fine, but yesterday, I wanted to transfer files via 4Gbs.

  I noticed that it is not possible for FAT based micro sd for this cards but if format you the card micro sd for exFAT, or NTFS you could work around this transferlimit.

  so today, I bought a drive from sd cards to solve the problem.

  I put my micro sd card in a sd card and then the sd card in the sd card reader/writer.

  I connect to my computer and I reformatted my card micro sd, exFAT AND NTFS, but none of them has been recognized by my phone.

  so I searched more on this subject, and it seems that android supports NTFS...

  so I wonder is my e2 liquid acer problem here? and what do I do?

  I hope that I did not purchase this reader/writer for sd cards

  Thanks for the help

  Sorry for the late response

  my phone is rooted so I lack it but there were a few problems update even if it was properly the

  so I changed my phone to its factory settings and updated to 4.2.2

  It was not always able to recognize NTFS in itself, so I searched again and found an app that should be able to do

  the app is called "paragon NTFS and HFS +" it wanted to download it but I need to root my phone to use this application

  so I rooted my phone after update to 4.2.2 and downloaded this app

  now, I'm finally able to use my micro sd NTFS-formatted card

  I don't know if the app alone would be enough to do, but it was clear that I needed the app or at least root

  4.2.2 update alone is not enough

• Ntoskrnl 9f BSOD after updating drivers for the video card, usb 3.0, LAN, Rapid Intel ST

  Hello

  need help. I get the BSOD constantly to turn the computer off. Previously, I've updated the drivers for the video card, usb 3.0, LAN, Intel Rapid ST. could check my miniDMP and determine the driver causality. THX!

  ==================================================
  Dump file: 112014-19874 - 01.dmp
  Time of the accident: 20.11.2014 20:12:18
  Bug Check String: DRIVER_POWER_STATE_FAILURE
  Bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: fffffa80'0cf7f060
  Parameter 3: fffff800'00b9c3d8
  Parameter 4: fffffa80'13915010
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\112014-19874-01.dmp
  Number of processors: 8
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 1 037 480
  Dump of file time: 20.11.2014 21:56:45
  ==================================================

  Minidumps files (note the oldest, one is before the update of drivers):

  https://onedrive.live.com/redir?RESID=264854BEFA762656! 1121 & authkey =! AACkoNzGq5RwWFw & ithint = the file % 2czip

  THX!

  PCH

  These were related to the AVerTM62_x64.sys TM6200 BDA Driver of AVerMedia TECHNOLOGIES, Inc..  I remove the current driver and install the latest driver available.

  

• (S2800-400) Card PCMCIA USB 2.0 problem

  Well, recently I bought this ST Labs USB 2.0 card for my laptop. When I tried to install the drivers I just got a blue screen when the pilots was almost innstalled. It was on Win XP, I got the advice of a friend to change my OS for Win 2000, I did that, but then the pilot innstaller has said that there is something wrong with the device, press Finish to open help.
  I did what troubleshooting said, except that the device was not in the Device Manager to all (Win 2000)

  Some help would be great :-)

  Hi, Lars

  One of my friends uses USB 2.0 PCMCIA card with two USB ports and it has no problem. How have you installed new hardware? You first install driver and after that insert card PCMCIA or you did the opposite?

  Is there any kind of instruction how to do it? It's perhaps better first of all install the correct driver and then restart the computer to insert the PCMCIA card.

• Express Card USB + 1394 Combo Express card problem device.

  I have a Sony Vaio laptop and try installing this card in the Express slot to join sony Video 8 digital recorder to my laptop. Device will not load driver correctly. There was no disc or another driver with the device.

  The foregoing describes the problem well enough. I'm not very tech savvy

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. What is the exact error message you received?

  If you use windows7, I suggest you follow the link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Provide more information on the issue to you help again.

• error-200279 card USB-4431 DSA

  

  I use USB-4431 dynamic signal acquisition card.  I have the program set out in the attachment.  I am trying to generate a control shaker random vibration signal and at the same time reading back 2 analog inputs. When I run my code with the full program, I have error-200279 but when I split the acquisition & code generation and put it in a stand alone vi and run it in itself, I don't get any errors.  I tried the different sampling frequencies and samples/channel.  one that seems to work best is when I'm 60 kHz and 20Ks/channel sampling.  My requirement is an example for the acquisition of 200 kHz ane 20Ks/channel.  I've been monitoring the node available samples/channel and seems to continue until no more samples are available and it shows 0.  I need to make these 2 tasks to run correctly in the main program, which is an event focused on loops of master/slave.

  Hi ssherian,

  The USB-4431 is a sampling frequency maximum of 102.4 kech. / s. If your application requires a 200 kech. / s, you will have to use a PCI or PXI-based DSA with a sampling rate WAS higher.

  What about the 200279 error, this error is usually due to a problem with the DAQmx hardware buffer. With a continuous acquisition, a good rule of thumb is to have 10 x the number of samples to read sample rate (i.e. the sample rate = 10000 s/s, samples read = 1000). It is also possible that your computer simply cannot process the data quickly enough. If you perform any complex, analysis of real-time data the processor of your computer simply may not able to catch the flow.

  This KB: error-200279 DAQmx Read Error provides an overview of together in-depth to error 200279, possible causes and measures to resolve the error.

  Hope this helps,

  Chris G

• I can't get two cards USB worked at the same time

  I use Labivew 8.6 to program an application using NI UBB-9211 and USB-6211 connection to two USB ports on my PC in order to measure the temperature and pressure (voltage) at the same time. Also, I need to generate two AOs of USB-6211 to drive my engines. I tested two cards, they are OK. But when I program them together, I get only 9211 worked, an error poped to acquisition of data USB-6211. Could you please help me on this? advice or examples of VI / would be greatly appreciated. Thank you in advance!

  Hi navistar.

  It seems that you should be able to do what you are trying to accomplish. Can you post some information about the error you receive? You use the lower level Assistant DAQ or DAQmx screws in your application? You can post a screenshot of your code where it is merged together and easier troubleshooting. You use any trigger of your application? We have examples in the example Finder (help > find examples) under Hardware Input and Output > DAQmx. These examples are a good place to start to build your application. If you already have the code work for each instrument and you have problems combining them, it might be easier to work with where you are at as opposed to leaving it everywhere.

• USB flash drive & external USB drive, windows problems 7

  I tried 4 different usb flash drives from different manufacturers and my drive hard usb Western Digital.  Windows 7 recognizes it until I have start the file transfer.  Then, he can not find the drive.  When I unplug it and plug it in again, I get a notification that the USB device is not recognized.  After that I restarted the computer, does the same thing all over again.  I ran Vista before Windows 7 and never had this problem.  I am very frustrated.  Help, please.  I need access to my flash drives & external or Windows 7 is useless for me.  Thank you

  Any card motherboard chipset drivers already installed on this PC?  Generally, these chipset drivers help Windows to see integrated devices, including USB.

• Card USB Reader works only with Windows 7 Final

  My internal card reader is not recognized by Windows 7.  I have uninstalled and installed the drivers of many times without effect.  When I installed the drivers from the website of manufacturers or automatically by Windows, it is not recognized.  After installing it manually through the Device Manager, it is now recognized, but returns the error: this device cannot start. (Code 10).  This device worked perfectly with Vista, Win 7 Beta and Win 7 RC.  The USB port on the card reader works, but not the card reader itself.  Can I use an external card reader and read the card.  The driver is: 6.1.7100.30093 by Realtek.

  Marc and Daniel,
  I solved the problem.  I have checked the connections to the motherboard and swapped USB1 and USB2 connections.  When I reconnected it everything the computer would not start.  I disconnected the connections usb case before and tried and it worked.  It seems that one of the two connections business is bad and the card reader to stop working at the origin.

  Thanks for all your help.
  Ed

• Card USb continues to stop. Error code 10.

  I installed a 4 ports USB 3.0 card on my Windows 7/64 system.

  When I install the drivers of the factory. (It's a card)

  The card remains active for about 5 minutes to 5 hours, gets an error message: this device cannot start. (Code 10)

  It shows as a hub of 2 SCREWS USB in Device Manager.

  Does anyone else have this problem?

  And yes I went through the store Windows.

  Bobb

  Hello

  I'm happy to have helped. Sounds like you were doing a few very good troubleshooting
  and negotiating with the manufacturer of the device.

  (If a response has been the solution please mark as 'response' or if it was useful)
  Please, mark it as "Found this useful - Me Too. Help others find the
  solutions to follow.)

  Move every day, go further

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Adding a card usb 3.0 on compaq presario cq5329f

  Can I add a USB 3.0 card in an expansion slot in a Compaq Presario CQ5329F using Windows 7 Professional?

  Hello:

  It should be no problem.

  You can add a PCIe x 1 card or a PCI card for the diagram of the motherboard shows that you have 2 PCIe x 1 slots and one PCI slot.

  Paul

• Second graphics card to output HDTV + HDV Live Preview

  Hi guys,.

  I have a few questions about the hardware and first Pro CS5. I use Windows 7 x 64 with a Dual DVI nVidia GeForce 7950GT released two LCD DVI monitors. I want to install a second graphics card so I can watch the preview window main premiered on my HD LCD TV and would like to know what the best plan of attack. Also, I want to be able to preview my HDV capture on my HDTV as cash on the 2.5 "LCD on my Sony HVR is not respectful of the eye!

  I think either the 7950GT to sell and buy a 470GTX GeForce which has 2 dvi and 1 mini-hdmi, or keeping the 7950 and buy a cheapish 2nd graphics card to use just for HDTV. How do you guys think is the best option?

  It's the graphics card I think having ( http://www.asus.com/product.aspx?P_ID=hs87bcOLPd9irXRk & templete = 2 ) one ASUS ENGTX470 / 2DI / 1280 MD5, my server can handle simply his power, but I'm pleased to power level, if this card will be output to 2 DVI monitors and also an HDTV with a mini-HDMI to HDMI adapter. Antec 1000w power supply is only about $225!

  Or, I can take the cheap option and get a NVIDIA Quadro FX 580 by Leadtek ( http://www.leadtek.com/eng/workstation_graphics/overview.asp?lineid=2 & pronameid = 491 & check = f ) which is a cheapy with 2 HDMI and 1 DVI. I guess there are other cards PCI - X graphics here to choose from which are probably fine, but it would be great to know what some of you use guys.

  
  There must be others out there who already have a configuration double monitor with a third TV LCD to preview?

  Anyhelp would be much appreciated!

  I just started using this new generation last night and I'll post in a week once that everything is settled, including overclocking settings. But to answer your question, my main reason to go with MXO2 for this third monitor output. Since I edit the material that will be always monitored by other people, I want to see on a computer screen. In addition, I mainly TV spots, so I need this third monitor. But I also like the Matrox because he will accept all kinds of formats files and inputs HDMI, component, SDI, S, and Yes, even composite! And finally, since I have the version with MAX, it allegedly offers accelerated outputs to the H.264 format, which is my main export file format. I have no problem giving another chance Marox now that the motorway was expanded to 64 channels. After all, look at the improvement that adobe has made with CS5. And Microsoft, for that matter. Thus, it is early yet, I just finish this build last weekend, so I'll go on my hardware/software CS5 upgrade when I have more experience with it.

  p.s. I especially like Matrox because I had an MXO2 map almost new - w/MAX with a PCI-e card AND laptop computer for $800! (Paid $4K for the Axio back in ' 06!)

• USB Flash drive problems

  I have a USB key that does not work. It's a drive 8 GB flash USB 3.0 which has been formatted and works on my Macbook Pro. The problem comes when I try to use it on a Windows device.

  When I format it under OSX Extended it appears under Windows but is empty.

  When I format it in FAT, under Windows it says that the device must be formatted first

  Either way, when I go to format the device on Windows it says that is only 200 MB space

  Any help would be appreciated.

  If you want to use a USB flash drive on the cross-platform (Win, Linux, OSX) computers you have the next chance:

  -MS-DOS (FAT) format:

  

  If you want to start the drive on a PC or use it with older versions of Windows, you may also need to set the partition to the Master Boot Record (MBR) for full compatibility Windows scheme:

  • Click the drive, and then select the tab "partition".
  • In the "Layout of the score" dropdown, select "1 Partition".
  • Click on 'Options' and choose "Master Boot Record" as the type of partition, then click 'OK' and 'apply '.

  Format discs very quickly, although the total time required will depend on the size of the drive.

  The file system resulting is compatible with all versions of Mac OS X, Windows 95, 98, Windows XP, Vista, 7, Windows 8, Windows 10, is one of the most widely recognized and usable file system formats. What makes FAT ideal of the file system to use for external hard drives or USB flash drives that are designed for use in environments with multiple operating systems.

  ATTENTION! The main drawback to the use of FAT32 is the file size limit, which limits the files on the drive to be 4 GB in size or less. If you need single files to be larger than 4 GB, use exFAT, even if you lose compatibility with older versions of OS X and Windows.

  -Format in NTFS and use a program like Paragon NTFS on your Mac ($ 15/20).

• Unlocked IPhone, SIM card is not valid problem

  Hello

  I went to study in the United States for a few months and I bought the iPhone 6s 'apple Store' to the United States.

  After that I came back to Thailand, I can't use my card SIM Thai (AIS network). It appeared that the sim card is not valid.

  I had to call apple care to solve the problem for me and after gave them my IMEI, they told me to contact verizon wireless to unlock my phone.

  So far, I confused altogether since I bought the Apple Store iphone, not Verizon.

  However, I contacted verizon wireless and even once, after gave them my IMEI, they said that since

  the unit was purchased third-party (which is apple Store) so that the device has not been locked by their network.

  I tried to restore my device so many times and also with the mode of recovery, but it still can not use.

  I checked with APPLE and they said that my device is unlocked model.

  Note that first sim that I plug when I got this device is ATT SIM card.

  I was contacted to ATT and they also said that my device has not been locked

  through their network.

  Please give me suggestions on how to solve this problem

  It seems that if you have the iPhone version, intended for use on the Verizon network. If so, it is not locked. However, this does not mean that it will work on the network in your country.  Phones, designed to run on the Verizon network use strips of LTE 13, 4 and 2. It seems that the AIS uses 3 and 1.

  https://en.Wikipedia.org/wiki/List_of_LTE_networks

  https://en.Wikipedia.org/wiki/List_of_LTE_networks_in_Asia