Cartridge cannot be recognized

Similar Questions

• Satellite A100-411: one or the other DVDs cannot be recognized

  Hello

  I work with my new Toshiba a100 411 since the end of February here at I m happy w / my choice.
  The only point is that I found that one or the other DVD cannot be recognized by the Pioneer K17A.
  Need me possibly new drivers?
  Thks in advance for yr help.
  Jürgen

  Hello

  Hmm I n t think so.
  As far as I know that these drives support not all CD or DVD and it s nothing unusual that one or the other DVD may not be recognized correctly.

  Sometimes a firmware update could allow the reader to recognize more kind of CD and DVD, but on the other hand, no one can say that this update might help.

• mechanism error print cartridge cannot move. C3180 all in one

  It will not be printed.  I got this error

  mechanism error print cartridge cannot move.  Turn the printer off.  Free cradle of cartridge.  I checked the cradle.  He moves very well.  The only way I can get the red light to go on top of the computer is to disconnect the two cords for 30 seconds and reconnect.

  I've uninstalled and reinstalled the software from the disc that came with it.

  In desperation, I tried anything that might help - checked for paper jams, changed two inks, processed on.  Restarted the computer.   A prayed and begged for it to print.  Nothing has worked.  My computer was purchased in 2007.   Maybe it of just old and has mechanical problems.  I don't have the time to go printer hunting this weekend and want to print something today.

  If anyone has any suggestions I would be very happy.

  Thank you.

  Reset the printer - turn off, remove power from the back of the printer (not the wall), wait 5 minutes, plug back in and turn on.

  Indeed, it may be stuck and dead, but it's really the only thing you can do to get it back.

• Peripheral USB malfunctioned and cannot be recognized.

  Suddenly, I get an error that one of my usb devices is defective and cannot be recognized.  Full analysis indicates no virus.  Any ideas?

  Hello

  1. What is the accurate and complete error message when you connect the USB device to the computer?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• my USB cannot be recognized by any computer please help me. Thank you.

  my USB cannot be recognized by any computer please help me. Thank you.

  Then, it probably doesn't and therefore more recoverable.  If several computers say it cannot be read, or it must be formatted before it can be used, then the problem is the flash player.  It does not, or the files that it contains are corrupt.  I hope that you have a backup of them stored somewhere.

• printer says no ink after I change cartridge cannot print

  I have a HP Officejet Pro printer.  I ran out of ink and replace the cartridge but still cannot print.  The message is always replace the ink cartridge.

  Contact HP support, of course.

• C7280 - three new cartridges today - all recognized but DO NOT print!

  Hello

  Today, I installed three provided HP ink cartridges (black, Magenta and Cyan) and all are recognized as present and full.

  Whenever I try to print - Similarly, the automatic test report - there are NO black, Magenta or Cyan Ink on the page. I've tried the option 'Align printer' and "cleaning print heads" - they had no effect.

  My son starts the new school year Monday and desperately wants to print some photos for its project work.

  Much appreciated assistance.

  L

  Hello

  I finally fixed it by cleaning and aligning the heads permanently a few times more, then sprang to life and worked fine since.

  L

• File WindowsSupport cannot be recognized?

  Hello

  So today, I tried to reinstall Windows with Boot Camp. I created a USB with complete installation of Windows, and I copied the (recently uploaded) WindowsSupport file to the USB port.

  That is the problem. Boot Camp recognized the USB under Windows Installation but does not acknowledge the WindowsSupport file.

  

  

  Someone knows how to fix this?

  P/s: by the way, I started the USB by opening the Manager start up, and when I clicked on install Windows only, IT is not no matter WHAT DRIVERS AT ALL! The list of drivers was empty, and there is nothing I can do.

  The WindowsSupport is not a directory. It must be a DMG/ZIP file that needs to be expanded. Allow BC Assistant to do this correctly. Bootcamp can re - download drivers.

  If you still want to do it manually, so please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• External USB HDD PX1269E - 1 50 cannot be recognized on computer

  Hello

  I recently bought an external hard drive, Toshiba 500 GB external USB Hard Drive PX1269E - 1 50 I want to use it on my Pentium 4 3.6 ghz memory 1 GB 400 GB internal hard drive and motherboard ASUS P4P800.
  I installed Windows XP Profesional SP2 on this PC.

  We have 4 pc at home and he answered on any of this.
  The next problem is that after I pluged in the USB 2.0 conector, nothing happens? In the close computer store, I asked the seller to try it on one of their computers and the seller pluged it in one of the laptops and my external hard drive has responded immediately!

  After the test to the computer store, we have purchased a pci usb 2.0 card because we thought it was the problem of usb, but after installation of the usb hard drive adapter has failed, either.

  What could be the problem?

  Hello

  The dealer has tested the HARD drive and it worked.
  It seems the exterior works of HARD drive and can be recognized on the computer.

  In my opinion it s is not a HARD drive problem. For the most part this external HARD drive needs more power that can provide a USB port. My brother uses external USB HDD and it was delivered with a cable from USB 2. His HARD drive must be connected to the 2 USB ports on the laptop.

  I think that if you have a single USB plug cable, so you should use an external power supply for the HARD drive or try to connect it to the USB hub with external power supply.

  Maybe it will work

• OfficeJet 7610: 7610 print cartridge cannot move

  I've changed a yellow cartridge & start printing several days ago. Work today & I get the error message in the thematic section. There are no jams & the print cartridge is stuck behind the shield with no way to access it. How to fix?

  In fact, after having lost a lot of time, including the creation of this account, I had a flashlight and stuck my head in there so I can get a decent view of the little slot on the right side of the cartridge pool area. I found that the reason why the cartridge wouldn't (couldn't) move is that the yellow ink cartridge had spontaneously jumped out of his seat and was blocking the whole mechanism of movement. I slipped a yellow cartridge a little table in the slot and pushed back knife and was then unable to take the cartridge set out in the open where I could reinsert the yellow cartridge back in place. This kind of thing can happen and not be easily identified or corrected is something of a classic design flaw. In a Word, it should have been anticipated by the manufacturer.

  And that's all.

• HP LaserJet MFP M127 - new cartridge Pro is recognized used als

  Hello everyone,

  We have a MFP HP LaserJet Pro M127 in our network.

  Today, I have built in a new cartridge (HP Original Product power), printing works well, but the printer itself recognises that the cartridge is new and still has the warning, that the cartridge is almost empty and second-hand.

  Y at - it an option to manually tell the printer that the cartridge is new?

  Best regards

  Markus

  Hi, Markus.

  Thanks for this information.

  Since it is a printer, you already used successfully, try the procedure described in the document at the link below. If the link does not work, do a Google search for c03916674. This will take you to the same document.

  http://support.HP.com/us-en/document/c03916674

  I would like to know if it works.

  Thank you

  Rumack

• ink cartridges cannot install in my new hp7520 all-in-one.

  I just opened my new hp7520 and during the stage of configuration to insall the print head cartridges will not move out of the stored postion.  It will not move automatically or manually.  Is there a secret?

  Hello

  There may be a piece of plastic blocking his path. Please watch the following video:

  http://www.YouTube.com/watch?v=gVJoOSE5ldw

  Kind regards

• HP Message Center question/properly installed cartridges not immediately recognized 564XL

  I have a HP Photosmart eStation c510 series printer that I bought in October 2011. The model name is CQ140A. I also own an iMac running OS 10.7.2. Lately, I have not received all of the HP Message Center alerts, and I don't nor do not forget to turn off the center of HP's Message. Help, please.

  In addition, the last two times I installed the cartridges, the Zeen nor the HP utility "found" them as soon as I close the cartridge access door, and, even if the cartridge is correctly installed, I get an error message indicating a cartridge missing or broken. In addition, the printer won't mode 'The printer Preparation' as soon as I instasll the cartridge and close the cartridge access door. Until a few weeks ago, I never had these problems. I have my printer repaired?

  Thank you for your response. My e-mail is {deleted personal information}. I would appreciate an answer, as long as an email and a Post on the Forum, as soon as POSSIBLE, as the HP utility tells me that my yellow cartridges and Magenta will be replaced soon.

  Happy 2014.

  Patrick m. Hanke.

  Hello PatrickHanke,

  I have included the following document ""Ink system failure"or" 0 x... "Error message is displayed on the control panel' for the error message you get. I know that the document is not the same as your error message, but the steps are the same. When you open the document, please click on the poster code no and follow the steps in order.

  Please let me know if you still get the same error message after, thank you.

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• My off brand ink cartridges are not recognized by my HP L25500

  I bought this ink cartridge: [changed to rules of Participation]

  but my HP L25500 does not recognize. It is completely useless.

  I went on many ink cartridges HP brand, who has always work without a single problem.

  But now, when you try less expensive off-brand of ink, I can't have my HP L25500 to recognize the cartridges.

  They are branded as G & G.

  The cartridges look the same as the genuine HP cartridges, but they covered all the logo with their stickers.

  Is there something I can do to get my HP L25500 to recognize cartridges?

  The page you gave indicates that the products have a 90 day warranty, I suggest to contact the vendor for a replacement.  HP does not guarantee the quality of third party products.

  This forum focuses on the level of consumer products.  For the Designjet that you can have better results, post in the forum HP DesignJet here, this is where the DesignJet experts.