mechanism error print cartridge cannot move. C3180 all in one

Similar Questions

• OfficeJet 7610: 7610 print cartridge cannot move

  I've changed a yellow cartridge & start printing several days ago. Work today & I get the error message in the thematic section. There are no jams & the print cartridge is stuck behind the shield with no way to access it. How to fix?

  In fact, after having lost a lot of time, including the creation of this account, I had a flashlight and stuck my head in there so I can get a decent view of the little slot on the right side of the cartridge pool area. I found that the reason why the cartridge wouldn't (couldn't) move is that the yellow ink cartridge had spontaneously jumped out of his seat and was blocking the whole mechanism of movement. I slipped a yellow cartridge a little table in the slot and pushed back knife and was then unable to take the cartridge set out in the open where I could reinsert the yellow cartridge back in place. This kind of thing can happen and not be easily identified or corrected is something of a classic design flaw. In a Word, it should have been anticipated by the manufacturer.

  And that's all.

• How to stop feeling ALWAYS of my C3180 all-in-One printer test page?

  Whenever I have replace the black ink cartridge in my C3180 all-in-one printer, it prints a test page. Every time. Always.

  It's boring, but also expensive ink is not cheap.

  I have an iMac with OS X 10.6.8 'Snow Leopard '.

  I have the latest software/drivers of HP printer.

  I also searched all the software, to see if there are preferences and settings that I can change.

  I realize that a test page should be printed after a new cartridgev is installed, and maybe when I need to test it. But not every freakin ' the printer is turned on. The cartridgte in there now is new and the ink is already weak, and what I am printing is barely readable. There's a pile of scrap paper next to the printer, all test sheets!

  I apologize for the attitude, but at more than $20 a pop for the cartridges, it's cost me money that I can hardly afford.

  Thank you!

  Hello

  Whenever you replace an ink cartridge cartridge he must be aligned.

  Lack of any color will make the alignment to fail and so the printer will continue to try to complete alignment.

  Compare the jessy printed with this example, it can happen if you ran out of color ink, etc.:

  

  For troubleshooting most follow this document:

  http://support.HP.com/us-en/document/c01336397

  Shlomi

• Error printer mechanism: the print cartridge cradle cannot move

  HP Officejet Pro 8500 has 910g

  The printer will not print: the message is: error printer mechanism: the print cartridge cradle cannot move.  Without the cradle of the cartridge and press ok.

  How free the cradle of the cartridge?  I sent a message to 13:30 and I got a notice that they will contact me within the hour, he is now almost 19:00 and nobody sent me back.  Help

  Try the steps in this troubleshooting page.

• Black cartridge HP PSC 950XI all-in-One HP 78XL mark stop error messages.

  Black cartridge HP PSC 950XI All - In - One HP 78XL mark stop error messages "" error: installed incorrect color cartridge ";" "" Install the color cartridge"and"install the color cartridge. I cleaned the contacts on the printer and cartridge and printhead. Cannot make it work.

  I've tried everything and still get error messages that continue to change so I can say that things are get cleaned but this cartridge is just not good. I ordered more than HP 78 and 78XL cartridge. If they show mistakes I'll let you know. Thanks for the suggestions, there was one that I had not tried before so I will certainly remember.

• HP Officejet g55: alignment of cartridges HP Officejet g55 all-in-One printer has failed.

  Failure of the alignment of cartridges HP Officejet g55 all-in-one printer.

  Please notify. Thank you.

  If you use cartridges done the alignment fails, you must use only the HP cartridge on HP printers.

• HOW can I SUBSTITUTE of INK CARTRIDGE EXPIRATION IN HP all-in-one 8600

  HOW can I SUBSTITUTE of INK CARTRIDGE EXPIRATION IN HP all-in-one 8600

  Hi @jfinny,

  I am able to provide you with more information about your printer model 8600 and its ink delivery system.

  Only some models of HP printers supports a substitution.

  If supported by your printer, when you print, you should be prompted to press OK on the printer to continue.

  If you do not get the prompt to click OK, your printer will deal with the similarly outdated cartridge as it does a cartridge missing or empty. It is designed to protect the entire printhead inside the unit.

  You can view more information about these resources:
  Consumable inkjet HP - ink Expiration

  Cannot print when one of the HP ink cartridges is empty

  You can also take a look at the limited warranty for print HP ink and print heads replaceable by the customer of consumables HP inkjet cartridges.

  I found this information in the HP Officejet Pro 8600 - User Guide, but I don't know if it helps at all;

  Used with this printer HP cartridges contain a memory chip that helps with the use of the printer. More, this memory chip collects a limited set of information about the use of the printer, which may include the following: the date when the cartridge has been installed, the date where the cartridge of the last use, the number of pages printed using the cartridge, coverage of the page printing modes used, any printing error that occurred and model of printer. This information helps HP design future printers to meet the printing of our customers needs.

  To disable the collection of usage information:
  1. on the printer control panel, press the arrow to the rightand then press Setup.
  2. Select Preferences, and then on cartridge chip information.
  3. press OK to disable the collection of usage information.

  NOTE: If you disable the memory chip's ability to collect information on the use of the printer, you can still continue to use the cartridge in the printer HP.

  I would like to know if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Need help printing on my C7280 Photosmart all-in-one Printer

  I use a Wireless/1100 Inspiron and have been able to print on my Photosmart C7280 all-in-one printer, but now I can too.  Help, please.

  Hello

  1. what happens when you try to print?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message trying to print?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the information is useful.

• I just replaced all 4 cartridges in my 6500 all in one.

  I just replaced all 4 cartridges in my 6500 all in one.  For all the ink levels are good.  Black ink will not print.  The alignment will fail.  Print test HP troubleshooting page and it was empty.  Suggestions?

  See the post here.

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP C3180 all in one.

  Hello

  I have an HP C3180 all-in-One Printer/Scanner/Copier and I am trying to copy a legal-size sheet.  Is this possible.   When I bought the printer, I was told that I could, but I can't understand it.

  HELP please.

  Thank you

  Hello

  The dish of this printer supports only up to 8.5 x 11 (letter size). It does support legal size paper. Check the specs below:

  http://support.HP.com/us-en/document/c00649946

  Legal scan/copy is possible only if the printer supports the automatic document feeder and printer C3180 is not.

• Bad or missing ink when printing or copying on HP all-in-one and color copier product families

  Click here for a description detailed steps for when colours or black are bad or missing when you print or copy on HP all-in-one and color copier product families.

  Determine if the problem is associated with cartridge

  1. the test report does not print correctly

  Check the estimated ink levels

  Check and clean the ink cartridges and the print carriage

  2. the test page prints correctly (for products only all-in-one)
  Step 1: Verify that the correct printer driver is selected in the software program
  Step 2: Restart the computer
  Step 3: Make sure that the correct printer driver is installed
  Step 4: Verify that printing in grayscale option is not selected
  Step 5: Select a color management profile
  Step 6: Determine if the problem is with the application software
  Step 7: Remove and then reinstall the all-in-one software

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• HP PHOTOSMART C5280 "Message of ERROR" print CARTRIDGES, refer to the PRINTER DOCUMENTATION

  My HP Photosmart C5280 All in one will not print.

  It has a flashing orange sign.

  It displays "Print cartridges refer to printer documentation".

  It was working fine yesterday and then just stopped. The cartridges were unchanged.

  Cannot find anything on this problem in the Basic Guide.

  Have printer is off and unplugged but WARNING reappears when returned to service.

  All possible solutions would be appreciated.

  Hi Hallam123456789,

  I see that you are having problems with your printer.  I'll take a look at the document below.

  Incompatible cartridges

  Let me know how it goes.

• Print error - "Print Cartridge problem. Refer to device documentation to troubleshoot. »

  Original title - device

  I changed the cartridges and the printer is now saying PRINT CARTRIDGE PROBLEM. REFER TO DEVICE DOCUMENTATION TO TROUBLESHOOT

  I did not have documentation, tried to solve the problems through my laptop but it cannot detact no problem.

  What should do?

  Seek assistance from the manufacturer of the printer.  They should have a copy of books online on the website of their support.