Cartridge HP F4280 problem

Similar Questions

• HP Officejet 4500 G510g: "at least one of the cartridges has a problem"

  My printer has been works well, but all of a sudden last week the message came saying "at least one of the cartridges has a problem", so I took the two cartridges to fill them. I discovered they were already full so it wasn't the problem. I was instructed to turn off and unplug the printer, I did several times and still nothing. I bought new cartridges today and that did not help either.  All the suggestions that I could try running just to buy a new printer?

  Hello

  Please click HERE to access the procedure which should solve the problem.

• Photosmart D110a. Error message: at least one of the cartridges has a problem.

  Photosmart D110a, Windows 7 32-bit, error message: at least one of the cartridges has a problem. Will print black if the deleted color cartridge. New cartridges does not solve the problem. Everything suggests not tried twice, cleaning, disconnect, etc..

  There is a document with the right information on how to help solve this problem located here.

  It seems that you have already made certain steps to help with this. If the printer is under warranty, then you may want to contact the HP Support on this device.

  Let me know if it helps.

• DeskJet F4280 problems with cartridge region

  Hello

  I had this kind of problem, I bought the HP DeskJet F4280 printer in europe some time ago, and there were 2 cartridges in complect (number 60). When they finished, I bought some cartridges in the United States, but they are a number 300 (it's really the same cartridge, just another region), has called for assistance from HP in Latvia (where I am now), they sayed it isn't a problem to change to another region. Asked my printer number of product (CN82P2G1H8) and after that they said someone from the technical part will send me e-mail with tip how to change region and also a password change regions. But now the 4th day and no email from HP tech could you please explain here how to change to region and also a password for it (my e-mail address: [email protected])

  Sincerely, Francis

  Hello

  Unfortunately it is not possible to make a region reset here. A henchman HP agent must create a key in a specifik software play, so I suggest that contact you your local support and ask why you have not been contacted and you want to reset the region of the printer.

• HP LASERJET PRO m277DW mfp: Printers Multifunction LASERJET PRO m277dw WARNIN CARTRIDGE NOT RECOGNIZED PROBLEM

  After you download an update from HP, I can't print because there are the following warning: "memory of the cartridges defective material consumption in ciano black - yellow - red.
  How can I solve the problem?
  Thank you

  Hey @manekineko,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a cartridge on printer Laserjet M277dw error. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the problems of the cartridge with your printer.

  Please let me know the results after following the above. If after following the above, you are able to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet F380 cartridge Black XL problems

  Hi, I got the XL cartridges for my deskjet f380 for the first time. regular cartridges are empty, I replaced first the Tricolor and now black. The printer worked fine with the replacement of the Tricolor, but the habit now to work with the installed Black XL. I've deleted and reinstalled several times, black checked that the contacts are clean they are and there is no more suggestions in the book after that beyond replacement.  It feels as if it was almost too big for the carrier when it is installed and clings a little. I use more pressure inside to the smaller size. the cartridge is a registered dealer and has been a new HP cartridge, xl21, which is right for the printer, and as it is now some time after buying them they were installed I am unable to return to the store and I am not happy to have to pay $60 for a new test the theory that it is defective. Any other suggestions would be appreciated.

  Hi thanks for the reply, I bought a carton of smaller capacity and it works fine. Before problem seems to be the XL cartridge.

• The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

  HP Color LaserJet 2600n, Windows 7 64 bit

  The red color does not print correctly, it of a weak orange and turn yellow on the edges.

  The problem is, even if we just replaced the cartridge.

  The other colors are fine.

  I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

• Re: HP Photosmart 6520 printer. Black ink will not print. Other OK. Tried the new cartridge and same problem

  I'm having the same problem. I ran the cleaning steps. I tried to lead the cartridges. I bought 2 black cartridges and both do not work. I've even used up my color ones do all the tests. Help please. I need my printer for school!

  Hi @ginim,

  Welcome to the HP Forums. I understand your printer is not printing black ink, and I would like to help. Please start with the procedure described in the following document; Printer prints a blank Page or do not print black or color ink for the HP Deskjet Ink Advantage year...

  If you have performed all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest you only do this if the printer is out of warranty; How to fix an HP, not for printing black ink and lack of color printer

  In view of the comments, it seems that this will help you

  Even if the printer is maybe more under warranty, if the problem persists, HP may be able to offer something. Perhaps, they may offer you a discount on another model. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  Since you just bought the printer you need to know, HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; Guarantee cheque.

  I hope this helps.

  If this resolves the issue, please let me know if we can help others who may be faced with the same problem.

• 6250 cartridge access door problem

  My gateway 6520 ink cartridge just closed.  If I have not even lift the scanner cover, door raises enough to give me an error message.  Is it possible for me to adjust the hinges for the door sits firmly?

  Jamieson, thanks for your response.  I followed your link to contact HP, and I see that HP won't talk with you - even by electronic means - if your product is no longer under warranty.  Pretty sad customer service.

  I put some silicone on the tab that tells the printer that the door is closed.  This should solve the problem.

• Cartridge Photosmart 7520 problem

  Hello.

  I have problems to install the Photosmart 7520 spare cartridges.  I have put in, locked in place I should and get the error "one or more cartridges appear to be missing or damaged.  They are HP cartridges, so this isn't the problem.  I have them out, cleaned the sensors as it says in my troubleshooting guide.  Sometimes when I close the door it will tell me that another cartridge is not working too.  Any help would be appreciated.

  Thank you

  TK

  Hello

  After getting the error "one or more cartridges appear to be missing or damaged", I found that the opening of the cartridge access door and stirring slightly cartridge problem corrects this problem.  Close the cartridge door and see if you still receive the error.  Keep stirring the problem cartridge and this should solve the problem.  It seems to be very sensitive.

  Hope this helps,

  Kathy

• Cartridge Deskjet F2180 problem

  I have problems with the black cartridge, it will not print an alignment page which means it does not print correctly. Does anyone have any suggestions as to what to do to fix?

  Alignment must be managed a clear and sharp and requiring alignment page unused, plain white paper.

  From your question, it seems that you only use the black cartridge to print alignment. If this is the case then to do an alignment managed, need you color and black cartridges. If the color cartridge is empty, you can try the alignment after installing a replacement colour cartridge.

  Use of a cartridge filled or remanufactured may sometimes cause unpredictable impressions. So, if you use one of these cartridges, then you need to try a new genuine HP cartridge to solve the problem.

  If the suggestions mentioned above do not apply in your case, then you can try to print a self-test page to determine where the problem is. Please follow the procedure under the title of "step 4" in the following link to print a self-test page: "".

  http://support.HP.com/us-en/document/c00900114

  After the test page prints, continue to step 5 and step 6 to narrow down the cause of the problem.

  Hope this might help you solve the problem.

  Kind regards
  Praveen

  Click on "Bravo" to say thank you!

  (Although I am employed by HP, I speak for myself and not for the HP)

• OfficeJet 4630: Install new printer - ink cartridge problem

  I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?

  Follow-up of your steps. Cartridges still a problem in the printer display.  Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked.  Staples deals custormers good!

• 6310 printer cartridge problem

  With the help of HP cartrudges

  Started having light images

  Replace the black print cartridge

  Get message to replace the left cartridge

  Equip the new color cartridge

  Still got the message

  Pulled both cartridges

  clean the surfaces of the color cartridge and replaced

  Black Cartrudge had holes on both sides of the contacts, imk all gone

  Replace the black print cartridge

  Still got message to replace the left cartridge

  Message won't go away

  Have no option other than replce printer?

  Thanks for the comments.   Had done all this, had used the cartridge for a week or more.

  Due to the ink that elapse in what is below the cartridges (twice), I gave up the battle and suspended for another printer, HP, another, a HPIJ 6600 AIO.  A mMore cartridges to have problems with but well.  Thanks again for the feedback.    This a a GREAT source of help...

• All-in-one HP Deskjet F4140... Message 'Problem' of the ink cartridge

  I get the following message when I want to print something.

  The following cartridges have a problem.  Far right, Tri-color in the cartridge.

  I don't know why it says more 'right' because in my printer the color cartridge is on the left side and the black is on the right.

  It is a new cartridge.  I tried EVERYTHING under the Sun... and I mean everything.

  Nothing works.  I am at a total loss.

  I've NEVER had this problem before with my printer.  He was always a great impression.

  Can someone help me please?

  I went through that information yesterday and it did not help to solve the problem I had BUT on a hunch, I removed the 'black' cartridge that is on the "right" side and the lights stopped flashing.  I replaced the black cartridge and now everything works as it should.  There was nothing wrong with 'color' cartridge that is on the left.

  The information provided by the program of 'diagnostic printer' HP that I installed were incorrect, because it indicates the problem as with the "color cartridge... located on the right side

• Problems after replacing the cartridge

  Hello

  I have a problem with my all-in-one HP Photosmart C3180. Recently, I replaced the black cartridge with a new one and now I can't print or copy more because it shows a problem with the cartridge three colors (it has not been replaced).

  What happens is that the red error led and the led (the one near the color copy button) color cartridge still flashing. It does not accept any input print and everytime I turn on the printer it will begin what is called "align cartridge" (printing paper with a few lines on this subject).

  Is that what I can do in addition to the replacement of the two cartridges at the same time? I never had this problem before.

  Thank you for your time,

  Alin.

  Hello, AXN

  Unfortunately, you must have the color cartridge to print. I noticed that some printers can still use the scanner if you also need that. You can always try, but it might give an error when you try to print.

  Let me know if the replacement cartridge solves your problem.