Similar Questions

• HP Officejet 5610: Problem with cartridges

  At the moment I can't print more. Whenever the 'Problem with cartridge' message appears. I use no original HP cartridges. Mid October HP provided for a large number of models of an update to resolve this issue. I have not found a link for my model (Officejet 5610). What can I do?

  Thank you.

  Hello @ErikDC

  Thank you for showing your interest in the HP Forums! I see that you are getting the error 'Problem with cartridge' with Non HP cartridges. I would like to help.

  Your printer has not been affected by this update: dedicated to experience better impression.

  You can try these steps, but no guarantee they will work with the cartridges Non-HP: 'Incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• DeskJet 2540: Problem of cartridge Deskjet 2540

  I bought a carton of color HP301XL real alternative with my new printer a year ago 2540 (John Lewis - & I have every two years warranty with them).  A few months ago, when the ink of the trial missed, (& while the printer was still under warranty HP), I installed the new cartridge and it worked fine for a while.

  A week or two there is the printer will not operate and displays a message indicating that the cartridge is empty and that it replaces. I use the print color VERY sparingly. The ink level display showed a lot of remaining ink and I did not see how the cartridge might have suddenly run out of ink.

  I scoured the suggested remedies: clean contacts cartridge and printer (distilled etc.). After several attempts to clean-up, the printer started working again for a day or two, but then the almost nine (genuine HP) black cartridge empty also showed. More cleaning and the printer worked again for a day or two, showing both nearly full cartridges, ink indicators.

  Since then I could not print and everytime I try, I get a variety of messages telling me the cartridge is empty or not a part of HP, or it is a cartridge 'more' and must be replaced.

  It takes a lot of my time and I have other things to do than mess trying to convince the printer to work.

  Could you help please, before that I resort to contact John Lewis for help and a replacement printer as possible?

  Hi @ILIL,

  Welcome to the HP Support Forums, I understand your frustration and want to help you with the HP Deskjet 2540 and problems with the cartridges that you encounter.

  I'll see you when you started running on the problem, you have repeated the cleaning process several times. When you clean or align the print heads that shoot the ink cartridges for these maintenance tasks, that's why you saw the depletion of ink. To get a better understanding of take a look below:

  Using ink in inkjet printers.

  "I would like you continue to take a look here: a cartridge ' more ' message for HP Multifunction printers and monofunctional

  Please contact our technical support at the 800-474-6836 as it may be hardware printer or cartridge. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you

• 2542: problem with cartridge - mail does not

  I have a problem with printing (scratches on print). Contacted HP via support form and received a mail that I get a new cartridge. So far so good.

  In the HP E-mail additional requests for information (address details), replying to the email does not work, and there is also no way to share the info with HP. How to proceed?

  Hello

  I've included a list of country phone numbers support in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP Deskjet 3050: Problems with printing in color?

  Hi all, I have problems printing in color. No idea what to do. Here's the problem: I'm trying to print in color and the colors look darker on one page, my colors are fine then saw green to halfway through until its finished. On another page, the colors are ok, but some colors are missing.  I tried the cleaning test, the colors seem to come out ok! Tried to see the ink and the remaining portion. It seems to be more left black and yellow, cyan and magenta. No idea what do then, never had this problem with the printer before. Thanks for any help!

  Looks like you have a cartridge that is short of magenta or default.  This can happen to cartridges that are very old, even if they still have ink or third party cartridges that were not filled out properly.  The steps of troubleshooting in the paper here may help, but I suspect that you need a cool color cartridge.

• Problem with editable regions

  I have two problems with the editable regions:
  
  A message tells me the following:
  
  "You placed the editable region"EditRegion9"inside a block tag. Users of this template will not be able to create new blocks in this region. Place the region outside of the block tag if you want users to be able to do".
  
  I don't know what it means at all.
  
  The other message has to do with an editable optional region. I want a second article at the bottom of the page to disappear in a few pages, and so I placed an editable optional region in the template. But at some point, when I saved the template, an error message came. He said:
  
  "There is an error on line 141, 156 (absolute position 7905) column of (my template): TemplateBeginIf tag inside the editable."
  
  The code looked like this:
  
  < class td 'pageName' = > <!-TemplateBeginEditable name = "EditRegion3"--> < span class = "style15" > <!-start if cond = "_document ['2ndTitle']"-> TITLE <! - End If - > < / span > <!-TemplateEndEditable--> < table >
  
  So I removed the code '' if. ''
  
  The problem is, it has become an editable but not an editable optional region, and so when I remove the second section at the bottom of the page, a large space is left blank!
  
  What is the correct code? I removed and reset this code for a while now, just can't do things.

  > "You placed the editable region"EditRegion9"inside a block tag. Users of
  > This model will not be able to create new blocks in this region. Move
  > the
  > region outside of the block tag, if you want users to be able to do. »

  This means that you have done this-

  You placed an editable inside one (of block tag

  ), which means
  that you will not be able to insert the new blocks in this editable area
  for example,.

  ,

  , etc. You had done this way-

  You would have no problem.

  > What is the correct code? I was remove and reset this code for
  > some time now, just can't do things.

  You can't have an optional region within an editable region. Period.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "Mila D. Aguilar" wrote in message
  News:fbbm67$IQB$1@forums. Macromedia.com...
  > I have two problems with the editable regions:
  >
  > A message tells me the following:
  >
  > "You placed the editable region"EditRegion9"inside a block tag. Users of
  > This model will not be able to create new blocks in this region. Move
  > the
  > region outside of the block tag, if you want users to be able to do. »
  >
  > I don't know what it means at all.
  >
  > The other message has to do with an editable optional region. I want one
  > second
  > read the article at the bottom of the page to disappear in a few pages and so I
  > place
  > an optional editable in the model region. But at some point, when I
  > saved the
  > model, an error message came. He said:
  >
  > "There is an error on line 141, 156 (absolute position 7905) column of (my".
  (> Template file): TemplateBeginIf tag inside the editable region. »
  >
  > The code looked like this:
  >
  >

  <>

  
  > class = "style15" > TITLE
  >
  > So I removed the code '' if. ''
  >
  > The problem is, it has become an editable but not an optional editable
  > Region and so when I remove the second section at the bottom of the page.
  > a
  > large space is empty!
  >
  > What is the correct code? I was remove and reset this code for
  > some time now, just can't do things.
  >

• OfficeJet Pro 8630: Problem with cartridges

  Hello:

  They yellow cartridge in the printer ran out of ink.  Normally, this isn't a problem.  I opened my new pack of ink and replaced the yellow cartridge.  The printer freaked out and said that there was something wrong with the cartridge.  Not OK, so I put the old one back, no problem.  Today I went and bought a new series of color cartridges and replaced the yellow cartridge with that of the new box.  No, same thing.  It is said that the cartridge appears to be damaged.  It's new!  It really can't be anything wrong with each cartridge.  Any ideas?  I really need to be able to print some elements in the next day or so.

  I ended up having to buy a new printer. This time, I bought the extended warranty. Thanks a lot for your help.

• HP deskjet f4580: problems with the wireless

  Hi I have. Printing HP deskjet f4580 and I try to connect to my wifi but it doesn't I look on the hp page and I try to do by pressing the wps, but it did not help me pls thx

  PS I have an iPad without a computer mobile o

  Hello! @Liz1712, thank you for joining the HP Forums!

  I understand that you have your wireless printer connection problems.

  Please try a few steps recommended below.

  On the printer Panel, hold down the button for two seconds wireless.
  NOTE:
  The printer starts a timer that allows two minutes to push the button of the wireless router WPS.
  Hold down the button the router WPS wireless for several seconds. The printer automatically detects the wireless network and then configure the connection.
  If your printer connects successfully to the wireless network, proceed to the next step.
  If your printer is not connected to the network wireless with WPS, you must use a temporary USB connection to set up your printer on the wireless network. Go to the next step.

  Please refer to this article for more information: http://hp.care/2c5GfmP

  Let me know the results!

  Have a great weekend ahead!

• HP Deskjet 3525 problem with ink 364 - misleading information

  I bought a 364 original ink. 364 ink because after the installation of the printer in my operating system, I have 'HP Deskjet 3520 series' printer and printer software is identify him as 3520 series printer.
  Keeping in mind, I bought 364 ink for printer 3520 but this ink is identified as "wrong cartridge", after a detailed study that I discovered that on the underside of the printer I have small label it information that my printer is model 3525, after further investigation seems to think I need different types of INK.
  OFC I can't replace already open ink to the place where I bought it.
  FYI same driver for printer 3525 3520 name.

  Question: Is there a way to activate 364 ink in my printer 3525? or the only way is to buy another INK (655)

  Hello

  Thanks for the reply.

  I've checked everything.

  Take a look in SureSupply

  We have inks compatible 364 for

  E-all-in-one printers HP Deskjet 3520

  E-all-in-one printer, HP Deskjet 3522 range

  E-all-in-one printer, HP Deskjet 3524 range

  E-all-in-one printers HP Deskjet 3526

  But for

  E-all-in-one printer, HP Deskjet 3525 range

  655 only is good - nothing else.

  I already called my supplier (distributor of original INK) and I am unable to replace my ink (because I opened a black), and I was forced to spent another $ 50 (150 PLN - price in Poland) for the new manuscript.

  I was advised to sell it on ebay .

  In Poland, life is hard, but HP is making it easier with its policy of ink.

  Good day.

• DeskJet F4280 - print a cartridge alignment Page every few minutes

  My F4280 has decided to printe cartridge alignment pages, whenever I turn it on or randomly as he just sits there.  When I put the page alignment and hit the resume (because he told me to do) he goes through an internal movement, sits there for a while, THEN displays another page of chartridge alignment.  Tried reloading the software, but problem still them.

  Hello ImJustAvg,

  This should help. When another page comes out of the printer, first disconnect the computer then place the page on the scanner and hit the resume. After restarting makes the printer to see if it will always print a page. If it continues to do, he checks the quality of the page. There must be black on it and at least 1 color. not to mention the color in the picture of the printer.

• Please HELP * problem with dynamic regions ADF...

  Hello
  
  I have 2 separate workflow in my application. 'Search-user-flow' & 'create-user-flow. I got to view these feeds in my main application (home) as a dynamic region with 2 dynamic links.
  
  My page main split into two panels where I suppose to display dynamic links on the left side and the workflow right. Want to display the default search feeds loading the home page, and when I click on the link for the user to create, create flow must be exposed to the right side. Please help me how to do the same. I was halfway through the path, but not totally.
  
  Here's what I've done so far.
  
  Step 1) creation research-user-flow (this stream were only page fragments not pages)
  Step 2) created create-user-flow (this stream were only page fragments not pages)
  Step 3) slide / move the search-user-flow in right panel of the main page as dynamic and created new "searchFlow" managed bean and the same card.
  -(After this stage, the main research stream fragment appears in my main page)
  -(Managed bean created taskID entry and the method)
  
  Step 4) slide / move the create-user-flow to the left side panel as dynamic link.
  Step 5) slide / move in the research-user-flow for left side panel as dynamic link.
  
  During the loading of my main page, I could see 2 dynamic links in the Panel left side and 1 flow to the right side panel. Now when I click on the Create User link, it's pass the stream and display the stream of the 2nd on the right. So far so good. Now, if I hit any link here after an error. Please help me how to solve this problem and make the works of dynamic region. It is really urgent and fight with past 4 days...
  
  Thank you
  klogube

  Hello

  define the scope of the bean managed bean that passes the workflow to a wider scope than requestScope: viewScope, pageFlowScope...

  Frank

• HP officejet 5700 sensor problems with cartridge

  flashing indicating change Dungeon printer cartridge.  Replacement of the cartridge does not stop flashing, and the ability to print.

  Hello

  Contact support HP, their drivers and documentation online and ask in their forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP deskjet 3520 problem ink cartridge... Can someone suggest another brand of printer that is not HP?

  Hello... I have yet to receive an answer that solves the problem. I regret buying the printer because now it does not work. The error message remains despite the advice how to fix it.

  We only use the black cartridge.

  Can someone suggest another brand of printer that is not HP?

  Thanks in advance. I am in England and need to print urgently.

  Hello... problem solved... Thank you very much.

• HP deskjet 3520 problem ink cartridge...

  Hello... who need to print quickly (it is always when the printer has a problem)... we use only black ink, so the colors are not necessary. However, they are all in there. The error message on the printer screen is "one or more cartridges appear to be missing or damaged etc etc...". »

  I cleaned the cartridge yellow as indicated in the message. Everything is given carefully and completely. It turned on and everything works... the error is still there... new black cartridge installed.

  How to work around this message so I can print?

  Thank you in advance.

  Hello... problem solved... Thank you very much.

• DeskJet 3510 problems with my MacBook

  When I first set up my printer, everything was fine. Then I changed my wireless settings, so I need to reconnect. I ended up using the disc (the first time, I think that I did it simply by downloading the driver, etc.). So now, it is not quite right. It prints but the print job is right there instead of to go, and to print something new the next day or another thing, I have to manually delete the old job. Also, I can't scan, even if I use the power cord and plug my laptop in this way. I have now two instances of the hp instead of a utility, so I should probably remove a.

  Hey SMGmi,

  Welcome to the HP Forums!

  Due to the fact that it is showing double of some software, this can cause mix ups and communication problems. I suggest you uninstall all the HP software for your printer. I've included the document "uninstalling the printer software.

  Once the uninstall is complete, while providing a new installation of the software. I suggest you one check and fix permissions of the drive running. I've included the document '12.x disk utility: repair disk permissions'. For step 3, where you want to select the disk, please choose your hard drive. After that the disk permissions repair complete, restart your Mac.

  Once restart is completed, please reinstall the printer software. I've included a link to "HP Deskjet 3510 e-all-in-one of the printer drivers". Choose your system operating, and then click Next. Click on driver - product Installation software. Then download and install the software for your printer.

  Print jobs are always stay in the queue after they print?
  Are you able to scan?

  Forward to your response.