Cascade a status changed by a child block
I have a rather tricky to implement, requirement and I'm having problems with it and I hope that someone can have a bright idea, I didn't think of that.We inspect homes to specified plans. These plans can be a standard diet or a special needs. All new properties start with a standard plan. Each if standard or special regime consists of several steps.
The form is a master / detail with the regime as the master and the stages within the regime as the child table.
What I want to do, is if the documents of the child (the stadiums) are changed (can be updated to an existing Stadium, capture of the steps or additions of new) to force the creation of a new special regime as a copy of the standard, including the same steps except if they have been modified.
master and detail are based on views and archive on-update trigger allows do me an insertion rather than update when this is necessary, but the problem is that only added to the new regime actually modified child records.
For example
A standard plan consists of steps 1, 2 and 3.
The user makes a change to step 1.
When validate point on the flags of the stage 1 master record as one of the special standard
sur-mise up-to-date on the master sees the update and insert a special regime
sur-mise up-to-date on stage 1 sees the change to the master and inserted as a child of the new master
steps 2 and 3 are however unchanged and therefore do not trigger the sur-mise updated and therefore are not added to the special regime.
Things has tried so far
implement the master go_block the child, last_record and loop through the definition of the modified indicator - ins with restricted problem built this and too bulky
force a State changed on chaild records in the post request and untangle if a real change in the sur-mise to day - work, but if you leave without changed data, you get the message "do you want to save your changes" which is difficult to remove
Is there a better way to change cascading to the master of all the child records?
The problem is that the detail in the form records will not be the same as the default original plan
I got it.
My thoughts in detail:
Regime has a logic UK, let say plan ID
Steps a logic UK, let say system IDS and Stadium. set
Data at the start
Master Regime ID 1
Details Stage No 1
Stage No 2
Stage No 3
Now, you delete only stage no 2 and add no step No 4
1. this task updated master, calla procedure that will totally copy the system including all the steps in the comic book,
This will create the following data in the db
Master Regime ID 2
Details Stage No 1
Stage No 2
Stage No 3
Accordingly, in the ONE-DAY plan-id goes from 1 to 2
2 spot, DML operations on the details produced
for the first and the third folder, nothing is done, the data is already correct through the 'copy routine' on the masters WE-UPDATE
3. the task of the DML for no 2nd look
DELETE STAGES
WHERE REGIME_ID=:MASTER.REGIME_ID
AND STAGE_NO=2
Now resemble data in db
Master Regime ID 2
Details Stage No 1
Stage No 3
4. the task of the DML for no step 4
INSERT INTO STAGES (
REGIME_ID,
STAGE_NO
) VALUES (
:MASTER.REGIME_ID
4
);
Now resemble data in db
Master Regime ID 2
Details Stage No 1
Stage No 3
Stage No 4
Do?
Tags: Oracle Development
Similar Questions
-
How to run the trigger child block before the block parent?
Y at - it anyway to run the child block trigger before master block?
In fact, I have a parent block having 3 blocks to the child on a form. I would now, when the user runs Delete_Record integrated with a push button, then first of all it must run before you remove the trigger 2nd child block, and then click the 1st installment of the child and the parent block.
If this sequence is not respected, form gives me error that exists to book the child and violated foreign key of the table of block parent. I already set the property of relationship to the waterfall.
So is there a solution?I could have spent a little more time thinking about your question. {: 8} is the issue. Because the relationship is not cascade past the first child, an event "Dele you" don't occur in blocks of Parent and 1 child. Therefore, on child blocks 2-5 Pre - led summer triggers do not fire because there is no case of "elete" D in the blocks for the triggers to respond too. I think the best option is to use the trigger before Dele you on the parent or blocks of 1 child.
>
PS... I can dele given you children tables without any error of block-1 pre D elete in descending order. But I don't think it better option. >
Hope this helps,
Craig B-)If someone useful or appropriate, please mark accordingly.
Published by: Silvere on October 14, 2010 09:01
-
"Svchost.exe has tried to change the settings. Blocked attempt. »
Original title:
Svchost
When I installed the anti-virus program, I put it up to block any attempt to change my home page, my search engine, or my Web browser. Since that time, I get a message every time I reboot the computer and whenever I go out to the Internet. The message from my anti-virus program is "Svchost.exe has tried to change the settings. Blocked attempt. "Whey is svchost.exe keep, try to change my settings you want? Is it possible that I can prevent this so that those irritating little messages will disappear?
Hello
Read this information:
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/
And also Malware scanner
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware
-
Virtual disk parent has changed since the child was created.
I recently had one of my virtual machines go down and I couldn't connect to access anything whatsoever, so I rode as an extra hard drive to another virtual machine in order to access the data I needed.
Once I had finished I he took off the other VM and proceeds to the power on the virtual machine, but I got an error of:
"The virtual disk parent has been changed since the child was created." The content of the virtual disk ID parent does not match the ID of parent matching the child content. »
Reason: The virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.Cannot open disk ' / vmfs/volumes/4e24c6fe-3c2ad61e-a57c-e4115bbbce6c/SNCTrillium/SNCTrillium-000003.vmdk' or one of the snapshot disks it depends on.I read upward through the knowledge base of VMWare on the modified files, but I've never had to do that before and I'm not sure about how to go on this subject as I've never used the vsphere CLI either.
I am currently using ESXi 5.0.0 with vsphere client 5.0.0. I've attached a screenshot of the error.
According to the snapshot between SNCTrillium - 000001.vmdk and the basic disk SNCTrillium.vmdk is broken, which means that the basic disk has been changed. I have attached an instant replacement for the SNCTrillium - 000001.vmdk with a fixed string that should allow you to open the virtual machine. However, since I do not know what and how much data has changed on the basic disk, I can't tell you how much data corruption, you will see. So you better take an another snapshot to be temporary once loading hard file attached, in order to ensure the current hard data files cannot be changed.
André
-
The virtual disk parent has changed since the child was created
Hi all, need your help with this one.
I deleted two snapshots and now I can not start the virtual machine.
Get the following error:
Reason: The virtual disk parent has changed since the child was created.
Cannot open disk ' / vmfs/volumes/4c483d34-a8c778c4-46a5-001cc460f09e/WEBPDXXXY/WEBPDXXXY_1-000003.vmdk' or one of the snapshot disks it depends on.I tried that link but still did not work KB: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1007969
I can still see the WEBPDXXXY_1 - 000003.vmdk, WEBPDXXXY_1 - 000002.vmdk and WEBPDXXXY_1 - 000001.vmdk when I browse the data store.
WEBPDXXXY_1 - 000003.vmdk
# Disk DescriptorFile
version = 1
Encoding = 'UTF-8 '.
CID = 59fab513
parentCID = a4a63bd5
isNativeSnapshot = 'no '.
createType = "vmfsSparse."
parentFileNameHint = "WEBPDXXXY_1 - 000002.vmdk".
# Description of the measure
RW 157286400 VMFSSPARSE ' WEBPDWEBPDXXXY_1-000003 - delta.vmdk.# The database disk
#DDBWEBPDXXXY_1 - 000002.vmdk
# Disk DescriptorFile
version = 1
Encoding = 'UTF-8 '.
CID = a4a63bd5
parentCID = 0f8995f3
isNativeSnapshot = 'no '.
createType = "vmfsSparse."
parentFileNameHint = "WEBPDXXXY_1 - 000001.vmdk".
# Description of the measure
RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000002 - delta.vmdk.# The database disk
#DDBDDB. Deletable = 'true '.
ddb.longContentID = "ab1b7008e386c884ae920930a4a63bd5".WEBPDXXXY_1 - 000001.vmdk
# Disk DescriptorFile
version = 1
Encoding = 'UTF-8 '.
CID = 0f8995f3
parentCID = 926f96fa
isNativeSnapshot = 'no '.
createType = "vmfsSparse."
parentFileNameHint = "WEBPDXXXY_1.vmdk".
# Description of the measure
RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000001 - delta.vmdk.# The database disk
#DDBddb.longContentID = "0336846d9f849b4b97ad028f0f8995f3".
DDB. Deletable = 'true '.WEBPDXXXY_1.VMDK
# Disk DescriptorFile
version = 1
Encoding = 'UTF-8 '.CID = 926f96fa
parentCID = ffffffff
isNativeSnapshot = 'no '.
createType = "vmfsRawDeviceMap."# Description of the measure
RW 209715200 VMFSRDM ' WEBPDXXXY_1 - rdm.vmdk '.# The database disk
#DDBddb.toolsVersion = "8295.
ddb.adapterType = "free".
DDB. Geometry.sectors = "63".
DDB. Geometry.Heads = "255".
DDB. Geometry.Cylinders = "13054.
DDB. UUID = "60 00 C2 92 41 62 5 d 8f-10 59 12 60 53 0 to a8 94.
ddb.longContentID = "b204c5bc523bbc83c01dd3ed926f96fa".
ddb.virtualHWVersion = "7".
DDB. Deletable = 'true '.Is there a chance to run ls-lisa from the command line (SSH) in the virtual machine folder and provide the output!
I ask because I'm a little worried about the timestamp of the hard (May 2011). Depending on the size of the files in the snapshot, it seems that the second virtual disk is not really used by the guest operating system and we could come back manually (by editing the .vmx file) on the resized basic disk (100 GB compared to 75 GB for snapshots) without losing important data!
If you want to revert manually,
- delete the virtual machine of the inventory
- backup and then edit the .vmx file (replace "WEBPDMAPPD_1 - 000003.vmdk" with "WEBPDMAPPD_1.vmdk")
- Move 3 snapshots in a directory temporary sub
- Add the virtual machine to inventory
- create a new snapshot to prevent the current hard files to be modified
- Turn on the virtual machine
If everything works as expected, you can delete the snapshot files moved and remove the snapshot created in the Snapshot Manager again.
André
-
Instant restore: the virtual disk parent has changed since the child has been created
Buenos dias,
A worm if someone is ha sown con este problema y me can echar UN cable.
Al trabajar con una maquina virtual en local con el disco en un disco external depuradora, to me broken instant crear of the United Nations (por el disco local creo en lo disgrace).
Al use esta Máquina in casa, arranco perfectly, claro, pero sin los datos del snapshot.
Hoy al arrancarla in the oficina ha generated a conflict: "the virtual disk parent has changed, since the child was creates," ha detectado what ha modified the virtual machine after ultima grabación del snapshot, no permite arrancarla.
Could eliminando el solucionarlo snapshot, pero no puedo perder todo lo as he ido generating information.
Alguna idea?
Para eso estamos DiegoPS.
No olvides close the discusion marcandola como respondida.
Saludos,
-
Hello!
I have a problem with a server that does not start.
We had a virtual machine running on VMWare Infrastructure 3 with two hard drives and an instant backup of them.
This machine has been removed from the inventory, but when it has been recreated, the secondary hard drive is mentioned for the basic-disk vmdk
instead of being referenced to the instant vmdk and used for a few days.All changes made after the snapshot, were kept in the delta snapshot file, which is not loaded.
We are with difficult to reference the secondary disk for the snapshot file. We tried to edit the .vmx and hard disk files
to correct the CID made reference, but when we try to start the virtual machine, we got this error:"The virtual disk parent has been changed since the child was created.
I think it happens because we made a blow-up of a secondary drive a few weeks after the backup snapshot. We spent 30 GB to 50 GB.
And because it has been referenced and used in another vm.*** Log is attached
Thank you
Bruno.
It is a bad sign
next step in the usual forest is to use "testdisk" since a LiveCD to set the tables MBR and partition - if possible
-
Hello
We have ESX 3.5 Update2
During the withdrawal of one of the many snapshots, the process has been crushed and the CID string seems to be corrupted.
Now the last work of x file - 000006.vmdk cannot start because the file is based on x - 000004.vmdk.
Now, I get this message:
Cannot open disk /vmfs/volumes...x-000007.vmdk or one of the Flash disk that it depends on.
Reason: The virtual disk parent has changed since the child was created.
If you provide vmdk small text files, all the vmware.logs, the vmsd file and the vmx file I can look into it
___________________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
OK, here's the situation, (maybe you can find a lot of discussion on this one)
I have a vmware server running SuSE Linux Enterprise Server 10. I use as its host vmware ESX 3.0.1.
I realize that I need to extend the drive because he must have more space disk for the production server. Then I resize the disk using vmkfstools x 90 G TARANTELA - TEST.vmdk. The bad news is, I didn't know that the server has a snapshot on VI client. As you know, the error occurred:
Failed to open the disc
"/ vmfs/volumes/4652e777-3eb2a038-8fce-0019bb343796/TARANTELLA-TEST-000007.vmdk" or one of the snapshot disks it depends on.
Reason: The virtual disk parent has been changed since the child was created
Then I remove the snapshot of the VI client and re-save the virtual machine to inventory, but it may yet open the disc unless I edited the .vmx line file:
scsi0:0. FileName = 'TARANTELA-TEST - 000007.vmdk '.
TO
scsi0:0. FileName = ' TARANTELA - TEST.vmdk.
It runs as the first time I installed the system, but all the important configuration is in 'TARANTELA-TEST - 000007.vmdk' snapshot.
Someone there the sollution, how can I do my work of snapshot again?
Kind regards
Arfal
In SL32-AP-TARANTELA - TEST2.vmdk
change
CID=dc621992
TO
CID=ce700012
and
RW 188743680 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
TO
RW 31457280 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
and
ddb.geometry.cylinders = "11748"
TO
ddb.geometry.cylinders = "1958"
in SL32-AP-TARANTELA-TEST2 - 000007.vmdk
change
RW 188743680 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
TO
RW 31457280 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
And then you change the changes you have made to the VMX file.
Try power o the VM - you will get probably mistakes (inside the virtual machine).
If this works report back (we are not yet made).
-
Hi all
I use forms 6i and I am facing a problem: when running a query on a data block cahnges status of the form to "CHANGED", my code as follows:
GO_BLOCK ('Update_Procedures');
SET_BLOCK_PROPERTY ('Update_Procedures', Default_Where, 'VisID =' |) '''' || : uVisitID | '''' );
EXECUTE_QUERY;
When I comment on (-EXECUTE_QUERY ;)) EXECUTE_QUERY statement and then execute triggr, State of the form "REQUEST". This means that the problem lies in the declaration of EXECUTE_QUERY.
I don't have this block changes before you run the query.
I did a lot of similar applications on other blocks of data in the same leave with not such a problem... I tried a lot of stuff, but nothing helped, so I need your help
Thanks in advance...
Kind regards
DamienAl-Robert Lellah...
PLs Note sometimes unnecessary code in this trigger u think it's useless, but it is used in such a way that the action of the original conflicted you trying to
Force removal if pls where any needless triggers focus on more functional triggers for your forms...
God Bless u always...
Kind regards
Abdetu...
-
Flex - the difficulty to detect status change since the 2.0 update
Hello everyone. I've been detecting orientation changes in my application without problem throughout until the 2.0 update, now, the events are not firing. Any ideas why the changr in orientation is not detected? I am less concerned by resizing.
this.addEventListener(SoftKeyboardEvent.SOFT_KEYBOARD_ACTIVATING, resize); this.stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGE, change); ... public function resize(e:SoftKeyboardEvent):void{ trace("activating"); // does not trace if(currentState == "landscape"){ mainTextField.setActualSize(1024, 350); tagwrapper.visible=true; } if(currentState == "portrait"){ mainTextField.needsSoftKeyboard = false; accordV.visible=false; tagwrapper.visible=false; } } protected function change(event:StageOrientationEvent):void { if(navigator.stage.orientation == "portrait"){ trace("portrait"); // does not get traced mainTextField.needsSoftKeyboard = false; IMFConnection.imfConnection.hideInput(); mainTextField.setActualSize(mainTextField.width, 1024); tagwrapper.visible=false; //remains visible accordV.visible=false; //remains visible }else{ IMFConnection.imfConnection.showInput(); } }
I also had a feature that has been resizing components on SofftKeyboard.Activate so I think that blocking the call to the StageOrientationEvent. In any case I did take all the stuff I need to do too much in the StageOrientationEvent and he settled in the SoftKeyboardEvent function.
public function resize(e:SoftKeyboardEvent):void{ trace("activating"); if(currentState == "landscape"){ mainTextField.setActualSize(1024, 350); accordV.visible=true; tagwrapper.visible=true; togglewrapper.visible=true; } if(currentState == "portrait"){ IMFConnection.imfConnection.hideInput(); mainTextField.needsSoftKeyboard = false; accordV.visible=false; tagwrapper.visible=false; togglewrapper.visible=false; } }
-
Changing languages entered Japanese blocking programs such as Google Chrome and other programs
When I change the language from EN to JP bar and then go into hiragana, Windows blocks the program and said it is looking for a solution, but can never find a. Can recur regularly. Yes I tried Google and the ONLY thing I can find these 2 other poor souls at this link
http://www.SevenForums.com/general-discussion/101419-program-crash-while-using-Japanese-input.htmlI asked this question before onbut I don't get all the answersI ran scannow and chkdisk and saw no problems. Is there a way to fix this without reformatting? Windows doesn't like it when I reformat (always seem to want another CD key)Hello
I advise to try to create a new user account and then try to change the language and check if the same problem appears:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Let us know if you have any questions.
-
Cancel a vector of change or an entire block
Cancel a vector of change or the last image of the entire block?
John Thorton says:
UNDO lies in its own tablespace; not with the table object tablespace
PCTFREE is not applicable in LMT which everyone should use instead of manually managed tablespace.
I am struggling to find a way that the OP could find no link between the generation pctfree cancel, and pctfree is applicable in LMT.
To answer your question on "what difference does make" - the obvious difference is that if you think that undo is to save the old blocks so the space that allow you to cancel when set the resources will be much larger it would be if you think that it is on the drivers of change.
Concerning
Jonathan Lewis
-
change a pl/sql block using "bulk collect.
Hello
I have a pl/sql block, short it slows...
DECLARE
CURSOR CURUPDATE1 IS
SELECT MF_TJ. UID_LO
OF MF_TJ
WHERE MF_TJ. DTYP (SELECT CD
OF MF_DOC_TYPE
WHERE MF_DOC_TYPE. DTYP_CAT = 'xx')
AND MF_TJ. LINE_TYP IS SET TO NULL;
BEGIN
FOR T IN CURUPDATE1
LOOP
UPDATE MF_TJ
THE MF_TJ VALUE. LINE_TYP = "NR."
WHERE MF_TJ. UID_LO = T.UID_LO;
UPDATE MF_AJ
THE MF_AJ VALUE. LINE_TYP = "NR."
WHERE MF_AJ. TJ_UID_LO = T.UID_LO;
END LOOP;
END;
/
now I change to use bulk collect, but I split it into two pl/sql blocks (each for an update)
DECLARE
CURSOR CURUPDATE1 IS
SELECT MF_TJ. UID_LO
OF MF_TJ
WHERE MF_TJ. DTYP (SELECT CD
OF MF_DOC_TYPE
WHERE MF_DOC_TYPE. DTYP_CAT = 'xx')
AND MF_TJ. LINE_TYP IS SET TO NULL;
TYPE of recs_type IS the TABLE OF CURUPDATE1% ROWTYPE directory INDEX;
REB recs_type;
BEGIN
CURUPDATE1 OPEN;
Go SEARCH the CURUPDATE1 COLLECT in BULK IN REB 8000 limit;
CLOSE CURUPDATE1;
FORALL i IN 1.recs. COUNTY
UPDATE MF_TJ
THE MF_TJ VALUE. LINE_TYP = "NR."
WHERE MF_TJ. UID_LO = (i) recs. UID_LO;-END;
/
DECLARE
CURSOR CURUPDATE1 IS
SELECT MF_TJ. UID_LO
OF MF_TJ
WHERE MF_TJ. DTYP (SELECT CD
OF MF_DOC_TYPE
WHERE MF_DOC_TYPE. DTYP_CAT = 'xx')
AND MF_TJ. LINE_TYP IS SET TO NULL;
TYPE of recs_type IS the TABLE OF CURUPDATE1% ROWTYPE directory INDEX;
REB recs_type;
BEGIN
CURUPDATE1 OPEN;
Go SEARCH the CURUPDATE1 COLLECT in BULK IN REB 8000 limit;
CLOSE CURUPDATE1;
FORALL i IN 1.recs. COUNTY
UPDATE MF_AJ
THE MF_AJ VALUE. LINE_TYP = "NR."
WHERE MF_AJ. TJ_UID_LO = (i) recs. UID_LO;-
END;
/Is there a way I can just use pl/sql block using bulk collect?
Thank you very much
Hi 5181139
As Paulzip and Jarkko Turpeinen have pointed out, you could do it using only SQL...
This is a course using COLLECT in BULK:
DECLARE blimit CONSTANT PLS_INTEGER := 500; CURSOR curupdate1 IS SELECT MF_TJ.UID_LO FROM MF_TJ WHERE MF_TJ.DTYP IN (SELECT CD FROM MF_DOC_TYPE WHERE MF_DOC_TYPE.DTYP_CAT = 'xx') AND MF_TJ.LINE_TYP IS NULL; TYPE c_arr IS TABLE OF curupdate1%ROWTYPE; c_rows c_arr; BEGIN OPEN curupdate1; LOOP FETCH curupdate1 BULK COLLECT INTO c_rows LIMIT blimit; FORALL i IN c_rows.FIRST..c_rows.LAST UPDATE MF_TJ SET MF_TJ.LINE_TYP = 'NR' WHERE MF_TJ.UID_LO = c_rows(i).uid_lo; FORALL i IN c_rows.FIRST..c_rows.LAST UPDATE MF_AJ SET MF_AJ.LINE_TYP = 'NR' WHERE MF_AJ.TJ_UID_LO = c_rows(i).uid_lo; EXIT WHEN c_rows.COUNT < blimit; END LOOP; CLOSE curupdate1; END;
See you soon,.
Gas
-
vCenter 5.1 Health Status Changed alarm
I have a vCenter server that occationally get an alarm status health (pass from green to red) changed, but I can't understand what it refers. I've looked through the vms, hosts and plugins and can't find any other alarm that could have triggered it could cause.
Nobody knows what he is referring?
Thank you
Matt
Go-> vCenter Home-> Select health of vCenter status and see if there is anything in red or yellow
Maybe you are looking for
-
Open/create/replace doesn't seem to allow writing to an existing file, whenever I'm trying to type a new name in his throws an error saying that the file does not exist. See attachment
-
E4200 as access point (or bridge?)
I ask for help, as I wipe the blood dripping into my eyes to beat my head against the wall. I'm trying to use my old E4200 to extend the signal wireless on the floor. What kills me, is that every time I put the E4200 to the bridge or change address i
-
HP Officejet Pro 8600: Printing vertical lines when you use doc auto power
I cleaned the optical window such as suggested in other posts. However, this has not fixed the problem for me. The vertical line is the center of the page, from top to bottom.
-
How to go from VSM at the new location?
I have the VSM Dell done VMware rehearsals once a day between the two environments of vCenter. Now that seeding is finished, I need to move my DR SAN and server vCenter on toward the new location, which of course has a different network address. I kn
-
I'm on Windows 7 Pro X 64. When I try to move a file or when I try to delete a folder, and try to do a lot of other normal operations, said Explorer that it has stopped working, will try to find a solution... It happens so frequently, I can hardly us