CC installed. In the Application the App al Manager appear as "not installed", and so I can't have the latest updates.

Similar Questions

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you have installed the latest updates it freezes and blue screens or?

  I have installed the latest updates and it did not even to the part where he set up after a reboot.  Now I'm stuck in safe mode and no alternative.  Updates are not listed in the list of installed updates and I tried to do a repair of the system from the installation cd and I'm tempted to do a restore system since the day before two weeks before updates.  Nothing works.  Any suggestions will help!  I'd hate to reinstall because I have no backup support.

  Update: the event log has nothing in it to try to start safe mode.  If the problem occurs before the event log service was started.  I tried to uncheck all part 3 applications and services in msconfig.  I'm out of ideas.  Someone has everything?

  I said that I tried to do a restore from the day before and up to two weeks before the updates.  I actually found the problem and he had nothing to do with updates.  My crapped out video card and ATI Control Center was freezing at startup.  So I took out the video card and it starts perfectly.  Thanks for the help anyway.

• Install the latest update of Lr error Code U44M1I210

  When I tried to update the latest version of Lr (such as requested by Adobe Application Manager) the upgrade has failed and the error Code is U44M1I210.
  What should I do to install the latest update?

  Please see:

  Error U44M1I210 | Install updates

  I hope this helps.

  Concerning

  Megha Rawat

• Hello. I installed the latest update of Firefox and when I start a new tab page displays not now my entry from google line.please help.tks

  Hello. I installed the latest update of Firefox and when I start a new tab page displays not now my google input line. I use Windows 10. Until the recent update (v4.1.01) each time I started a new tab the new page would show the google search entry line which is my default. Can help you to restore this feature? TKS

  Hi, 41 of Firefox, you must use the add-on tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Notice, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Phone crashed when installing the latest updated software

  I was download and install the latest update for my phone and it crashed.

  How to restore its functionality?

  Try to connect the device to your computer and iTunes and try to restore. What do you see on the screen right now?

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

  I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

  What is your operating system and Service Pack?

  What is your anti-malware?

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

  Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
  Operating system: Windows XP

  Hi depreciated,

  Thanks for posting in the Microsoft community!

  If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

  (1) did you make any changes before the show?

  The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Note: after using the .net Framework cleanup tool, please install all .net Framework components.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer?

  No idea why the latest update of security for WindowsXP (KB2686509) install not on my computer? Have tried many times, keeps on coming it was not installed.

  See the RESPONSE of two 2 messages in this thread-online http://answers.microsoft.com/thread/0deeacb6-115c-419d-ac37-03ff8927b79c

  Tip: Start with Christian script execution.

• can not install the latest updates KB2572073, KB2633880 and KB2515884

  Why can not I have problem installing the latest updates KB2572073, KB2633880 and KB2515884 tried multiple times and may not always install it they follow poping

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• How can I install the latest update to the Bluetooth radio adapter generic Bluetooth? The version I have is 6.1.7601.17889

  How can I install the latest update to the Bluetooth radio adapter generic Bluetooth?  The version I have is 6.1.7601.17889

  Hi George,.

  Click on the link mentioned below, if it's an HP computer.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01590950&cc=us&DLC=en&LC=en&product=4314711&tmp_track_link=ot_search

  Good day!

  Answer please if you have any questions.