CC is not opening after system restore

Similar Questions

• Dell V313 does not print after system restore

  My apologies if I should have posted this elsewhere.

  I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.

  I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...

  My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!

  I moved that pesky IE11 updated again, but this does not solve the problem.

  When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.

  I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)

  Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.

  I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.

  Instead, it adds the work in file print, which then comes out after a reboot.

  The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.

  Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.

  Thanks for reading,

  Matt

  Matt,

  Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• My seagate backup more external hard drive not recognized after system restore

  I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?

  It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?

  Hello Neil,.

  First of all, we apologize for the late response.

  1. What happens, do not install the updates?
  2. What is the complete error message you get, when the update installs?
  3. What is the update kb article number?

  
  for problems with windows updates, run the tool in troubleshooting Windows Update:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
   
  For the problem with the external hard drive
  Code 28 shows, the drivers for this device are not installed.
   
  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us
   
  Log in as administrator and then try to install the drivers
   
  How can I connect as an administrator?
  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-log-on-as-an-administrator

  S eaTools for Windows

  http://www.Seagate.com/in/en/support/downloads/item/SeaTools-win-master/

  Additional information:

  "Access denied" or other errors in the access to or work with files and folders in Windows

  http://support.Microsoft.com/kb/2623670/en-us

  I hope this helps. Please get back with the results.

• Right click in Windows vista file is not open after the restoration.

  I want to talk about problem laptop from my brother. One day her laptop stopped working suddenly, after only a few minutes the Vista operating system restored the system to a previous state (4 months ago). It is interesting to know that the operating system has not created any restore point in recent times. After restoring everything works except the right click. He (my brother) is unable to click any file, click function right does not.
  I searched this problem on the internet but didn't find that solve everything again. In my opinion, only a windows file is corrupted.
  Help, please.

  Hello
   
  • Click right on the Windows desktop?
  
  Follow these methods and check if that helps:
   
  Method 1:
   
  Run the Microsoft Fixit and check if it works:
   
  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/ 

  Method 2:

  Step 1:
  Check if you have the similar problem in safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135
  WARNING: After you have used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.
   
  Method 3:
  You may also experience this problem if the user account is corrupted create new administrator account and check if the problem persists.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Firefox does not open after upgrade

  I tried to open firefox and the update message appeared and thenfire fox did not open after so far, I tried to reinstall and that no longer works. I have uninstall before reinstalling

  The problem is that Prevx 3.0, uninstalled, now works fine! Thank you

• NEED DRIVERS AFTER SYSTEM RESTORE

  HP Pavilion g6-2128tx Notebook PC 
  Serial number: 5CD2231LJF

  {Information}

  After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!

  Hardware ID

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  I run on Windows Ultimate-64-bit

  Help would be GREAT

  Hello

  Download and install the following.

  Chipset Driver - Windows 7.

  After this Setup is complete, restart the laptop.

  Realtek software LAN.

  Broadcom Bluetooth 4.0.

  Realtek card reader driver.

  Intel Management Engine Interface.

  Intel USB 3.0 Host Controller Driver.

  Kind regards

  DP - K

• I start my computer, but only get blue DELL screen. F12 or F2 gets me anywhere, does not. Put system restore disc, but still no luck.

  I start my computer, but only get blue DELL screen.  F12 or F2 gets me anywhere, does not.  Put system restore disc, but still no luck.

  Hello

  It looks like you have a hardware problem

  link below has the dells F12 diagnostics performance, BUT you can't get in this

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  problem with the dell diagnostics the process and the process of recovery dell contact dell

  This is the diagnosis of the valleys and the recovery process not microsofts

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• DC Adobe will not open after new installation

  I just did a clean install of Adobe Acrobat Standard DC and it will not open after installation on Windows 7 Enterprise. It's also does not give me that whole EULA prompt.

  Right-click on the exe > click 'run as administrator '.

• My InDesign CS6 does not open after expiration of CC 15 day trial.

  My InDesign CS6 does not open after expiration of CC 15 day trial. The only option is to subscribe to the CC. I don't want to subscribe, I want to use my copy of the CS6. I uninstalled and reinstalled ~ no still no chance.  Anyone know how to open it?

  If you have installed cs6 install the subscription, it will capture your license CS6. Common sense would have been to disable CS6 before install CC as CS6 contains its own (and better kind) CS6 software with more upgrades and possibilities than the old version in a box.

  If you can not install CS6 with your own serial number for this reason, you will need to contact Adobe to reset the activations.

• Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...?

  Hello, anyone have any experience to try a plan after a trial, but the site is not opening after clicking on buy...

  It was useful, now everything works fine!

  Felsherif December 23, 2013 right answer 12:51 AM

  I had a long discussion with a Support Agent and finally solved my problem in activating my root user... after a lot of trial and error/attemtpts. Here is my summary just fyi, I hope this works for you also.

  I'm on MacBook Pro OS X 10.8.5.

  1. They had me first go to ~/Library/Applications support/Adobe/OOBE and delete the file 'opm.db '... Creative cloud question remained.
  2. Then they asked me to go to support/Adobe ~/Library/Applications and rename the files "AAMUpdater" and "OOBE"... and go to the library/application support/Adobe (note this is a different path) and remane the files "AAMupdater" and "AAMupadaterInventory"... question remained.
  3. They had me also go to my Netwrok Prefrences, Proxy server to configure, and enusre all boxes are unchecked and "use Passive FTP Mode (PASV)" also unchecked... did not help, the question remained.
  4. Of course they had me uninstall and then reinstall the creative cloud application, which I did (Applications > utilities > Adobe installer and run the "uninstall Creative Cloud")... but the question remianed.
  5. Finally, they had me to visit this page on the Apple support page, http://support.apple.com/kb/ht1528 and activated the user root for OS X Lion.
     1. After allowing the root user (and create a new password for it), I rebooted my Mac
     2. Saved in my Mac once as 'root' and connected to Adobe Creative Cloud using my usual Adobe user/email name and password.
     3. Go to the 'Applications' tab, and it worked perfectly!
     4. I disconnected the root on my Mac, then that reconnected me.
     5. Launched the creative application of Cloud, connected and went to 'Apps'... works great!

• just paid for photo shop, items online and it will not open after I installed

  just paid for photo shop elements and it will not open after installation

  CC applications close immediately after the launch