CC of Lightroom on two computers different access to same pictures?

Similar Questions

• I have lightroom on two computers, can I disable one and put it on another device

  I have lightroom on two computers, can I disable one and put it on another device.

  My dell desktop computer is broken and I want to use my lightroom on my other computer I have that its not let me because I have a two.

  Assuming that you are talking about 6 Lightroom Lightroom CC (which version are you talking about?), you must use the Cloud on Sign Out creative application on a computer before you can install it on another computer.

• What the your work flow using Lightroom on two computers?

  I realize similar questions have already been asked, but after much research, I gave up on the dream of seamlessly sync between my laptop and desktop computer facilities (and catalogues) in Lightroom.

  I thought that Lightroom Mobile hold the answer, but this can only sync with a catalogue and a mobile device. Then I tried to open the same catalog (which resides on an external drive) on both computers, but my laptop is connected via a network. It seems that an opening on a network catalog is not allowed? This leaves export and import of catalogs, but to be honest, it's a little a rigmarole.

  So, I find myself with my office and the catalogue of my collection of photos (which works fine). That just leaves me with my laptop, which is frankly a bit redundant.

  I'm curious to know how other people work with two computers... two catalogs and never the two are irreconcilable? Or export catalogs between devices permanently? Or something else?

  Hi Froodster,

  We do not recommend our user to upgrade their catalog on the network drives, because you could faces challenges to access and update.

  If your images can reside on the network drive, but the catalog must be on a local drive on the computer or any external drive.

  ~ Sarika

• printer via usb router two computers to access

  I have a Canon iP4300 printer connected to my router via a USB port. I am running Windows7 Home Premium (x 86 on my laptop (connected WIFI)) and Windows7 Home Premium (64-bit) on my office (LAN connected).

  The printer works fine from my laptop - it was the first to be connected to the printer.

  However, during one attempt of the same exact configuration of my desktop (again) - I get "the printer cannot be contacted over the network.
  I used the own methods windows for the installation of the printer and it was OK and went through the Setup without a hitch. It's only when I got to print a test page that nothing happened. On verification of the device in printers and devices that I noticed an exclamation point on this printer on execution of the troubleshooter, and were done with the above result.

  Don't know if this will help, but here is the report:
  Devices and printers

  Problems found
  CANON printer cannot be contacted over the network
  Contact your network administrator
  Problem with printer without current issue
  Any problems that have been checked without current issue
  CANON printer is not shared with the homegroup without current issue
  Printer paper is low or empty without current issue
  Printer toner is low or empty without current issue
  Printer has a paper jam now childless
  Printer driver requires update no current issue
  Printer is off without current issue
  A print job in the print queue is preventing another printing of f...             No current issue
  The print spooler service problems of print spooler service is not running without current issue
  CANON is not the default printer
  No current issue
  Problems found
  < printer="" canon="" cannot="" be="" contacted="" over="" the="" network                     ="" not="">
  Network problems may prevent the printer from printing.

  TCP/IP printer port
  Port name: CANNON
  Port number: 9100
   
  Contact your informational network administrator
  Windows cannot solve the problem. Please contact your network administrator.

  Problem with printer detected
  There could be problems with CANON. Windows will take additional steps to continue troubleshooting.

  Potential problems that have been verified - (show all 'Does not present edition')

  Details of detection

  Diagnostic information (network card)
   
  Network card diagnostics information:
    
  Network adapter driver to connect to the Local network information:

  Description...:
  Realtek PCIe GBE Family Controller
  Reference of the manufacturer.... : Realtek
  Provider of...: Realtek
  Version...: 7.45.516.2011
  INF file name... . : C:\Windows\INF\oem2.inf (NB: I also tried an inf file that is downloaded from the website of Canon via the driver file.)
  Date of the INF.... January 26, 2012 03:41:59
  Name of the section.... : RTL8168E.ndi hardware... ID: pci\ven_10ec & dev_8168 & rev_06
  Instance... state flags: 0x180200a
  Status code of Device Manager. . : 0
  IfType  . . . . . . . . . . . . : 6
  Type of physical support...: 0

  Network Diagnostics log
  File name: F2B2D1FB - 07B 5 - 43E2 - 8 d 15. 965B6653BE52 Diagnose.Admin.0.etl (it is a pirated copy of the .etl report).

  Other newspapers and Network Configuration
  File name: NetworkConfiguration.cab

  Publisher details...

  A question, I thought that can be a problem, is that two computers use the same port (9100) even if I started adding the printer, while the laptop was on and Windows seemed to correctly identify it.

  My setup real basis is:
  Canon of general
  Location: http://192.168.1.1:631/printers/CANON
  Model: Canon iP4300 (this changes a little when I used different drivers)
  NB: Don't know if this helps, but I can't change ' paper available:' default > no matter what I do with the printer preferences?
  Sharing is off
  Http://192.168.1.1:631/printers/CANON ports > Port TCP/IP Standard > Canon iP4300
  Security... I did all what I can in an attempt to make sure there is no robbery here.

  AND as stated above... it all works very well from the laptop.

  So, any suggestions?

  Hi Snapafun,

  Try the steps in this link, it worked for me.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• How to stop the connectivity between two computers that use the same IP address... ?

  Today, I managed to connect two computers with the same IP address. But now it is to be feared. for example, a person can access my computers using my IP and MAC address. So now, how can I stop the connectivity between these two computers. should what setting I use to stop.

  Tahnks.

  Hello

  1 have. what measures you taken to connect 2 computers with the same IP address?

  2. How are the 2 computers connected?

  3. how exactly you want to stop the connectivity between 2 computers?

  I want to tell you that 2 computers on the same network cannot have the same address. Each machine must have a unique address to identify it. A private network, as a home network connected to the internet, can be connected to a router to connect to the network, will have only 1 address, public IP address.

  In addition, if we know the IP address of a computer along the user ID and password, we can access the computer/shared files.

   
  If you are referring to the change of the IP address of the two computers, you can follow these steps and check.
   
  a. network connections open. Click the Start button, and then click Control Panel. In the search box, type 'adapter' and then, under center network and sharing, click view network connections.
  b. right click on the connection you want to change. Click on properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click the properties button. To specify your IP for IPv4, click on use the following IP address, and then, at the address IP, subnet mask, and gateway boxes by default, type IP address settings.
   
  A typical IPv4 address looks like 192.168.0.2; a typical subnet mask is 255.255.255.0. The default gateway is usually the address of your router.
  For example, IP address: 192.168.0.2 by 192.168.0.12 (for computers)
  Subnet mask: 255.255.255.0
  DNS: 192.168.0.1
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Two computers connected to the same account sync will not sync-ing

  I have two computers and an android device. I have set up A computer with sync, and it connects to a device and a virtual machine running in the computer, without any problem. I have another device that is not synchronized with them. It seems to be loged on the same account of Firefox. If I click Synchronize under preferences tab, all the options are checked and the account name is displayed. However, neither the favorite nor other data seem to be in sync to the device. Any thoughts?

  Hi ohnoplus,
  Thank you for your question. I'd be happy to help you explore this question with you. Here are a few troubleshooting steps that we can take:

  1. Please make sure that the version of the browser on Android is superior or 29.
  2. Please check in the accounts that there is no (obsolete) account.
  3. Please also try to remove the account, add once more
  4. Please, I beg you, then take a test and add a new bookmark, password or something on behalf of the Fund. Click on "Synchronize now".
  5. Set the account and synchronize it manually in the menu account on the mobile device.

  Note it may take a long time to synchronize on the first time, but please post back with the results and if there are errors, then, we can allow error logs.

• When a folder is displayed under several users, what is a duplicate or just two ways to access the same folder?

  I used to go to Windows Explorer in the start button to find things and see how my computer data is based.  After that I switched to Vista user accounts began to appear in the folder hierarchy.  There are accounts of users 'Administrator', 'Office Adminitrator s', 'my name', 'guest' and 'default '.  Under each of them except comments and by default, it seems to be duplicates of many of my files.  These "duplicate" files are really the same files that are accessible only through these different users?  Or is my computer overloaded with multiple copies of things.  And if this is the case, how can ensure me that I am always access the right, since they have the same names and I need to check what 'user' with which it is associated to know which it is really?

  Hello

  
  1. What are the files or folders that you see in the user accounts?
  2. were there any changes (hardware or software) to the computer before the show?
   
   
   
  They are different ways to access the same files.

   

  Users folder would show records of other users, subject to an authorization.

   

  But the images by default and other folders that appear are the currently connected user.

   
  
  Reply with answers to help you in a better way.

• How can I have access to a catalog of lightroom on two computers without the need of an external hard drive?

  I tried to put the catalog and photos in my Dropbox. Photos of course transfer and file .lrdata but transfers the .lrcat does not work.

  It should transfer as long as you remember to quit Lightroom every time before moving on to the other computer. If you do not leave, there is a likelihood of SIGNIFICANT corruption of the catalog that is why it must be EXTREMELY cautious when you put your catalog in a dropbox folder. It works but it is very dangerous.

• How can I use lightroom on two computers?

  Currently, I use Lightroom on my desktop computer. Sometimes it is really hard for me to get edition because I'm often not home. How can I install and synchronize my account of lightroom for my computer desktop and laptop? My desktop is a pc and my laptop is a Mac.

  Hi brittbritt92,

  The simplest solution is to put the catalog on the external hard drive, and then you can easily connect and use from each machine.  There are alternatives, including using import and export to and from the catalog, but they then ask you to keep track of who you use last.

  Concerning

  Rohit

• Lightroom on two computers

  Hey there.

  Probably a dumb question but if I download lightroom on a second computer, this does not affect the first catalog of t - he?

  Thank you very much

  Hi MissGatt,

  No, it does affect the first catalogue at all, because you use it on any other computer.

  It will be useful.

  Kind regards

  ~ Mohit

• Can I use one account of lightroom on two computers?

  Hi, I'm about to buy an ultrabook for travel. Can I use the same account of Lightroom on the ultrabook that I use on my Macbook Pro?

  Hi karal28067667,

  Yes, you can activate the same program of Lightroom on both machines.

  Reference:Creative Cloud Desktop application FAQ

  Kind regards

  Claes

• Q: I have 5 Lightroom on two computers

  I put 5 Lightroom on my office son is a student.  He wants on its new Macbook Pro, but after installing it is said that the license is not valid.  An advise please?

  Make sure that the correct version is being installed.  Make sure that the correct serial number is used.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Can I install Lightroom on two computers?

  Sorry if I posted in the wrong forum.

  I installed Lightroom on my personal office. The license allows me to install on my personal laptop as well?

  Yes, your license allows installation enabled on both machines.

• Contacts sync to two computers different blackBerry Smartphones?

  I have a Blackberry Storm that is configured to synchronize with my computer to work through BES.  Is it possible to sync my Outlook contacts on my personal computer at home (while retaining the ability to sync my work computer)?  When I try to connect via the Desktop Manager to the House, it won't let me not synchronize because I am already set up for wireless synchronization.  Is theer a third demand or another work around that will allow me to do this?

  before doing synchronization, you can disable the wireless sync. There is an article in the public knowledge base on this subject. You can check it out by clicking on the 'HELP' button at the top of the current page.

  or you can read this blog post:
  http://www.BerryReview.com/2008/08/22/FAQ-How-to-disable-BES-wireless-sync-so-you-can-selectively-re...

• Using Lightroom on two computers

  Here's my situation.  I have an iMac that is now my main computer for LR workflow.  Preview catalog and the catalog to sit on the hard drive of my iMac.  I have a MacBook Pro that I want to use on a trip.  I just want to shoot a project, import pictures on my laptop and change them in LR.  When I return to my iMac, I want to be able to move the original images and any changes on my main hard drive.

  I tried to move my lrcat and lrdata to a dropbox folder and point my LR iMac than... things catalogue is painfully slow. I was not even trying to open things up on my macbook.  I do not use a hard drive on a trip because my iMac in my office is connected to 16TB and tb 20 disks RAID 5, where all my images to sit.

  What is the best option here?

  You would export the work that you did on your MacBook to a catalogue on the external hard drive. Then you would move this external hard drive to your iMac. You would open the normal catalog that you always use and then choose Import from the catalog that is located on the external hard drive on the iMac. That would merge the work that you did on your MacBook with the catalog on your iMac, and everything should be consolidated in a catalog.