Constant accidents with no common theme

Similar Questions

• I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

  Hello.

  Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

  Here's what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello

  Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
  page will show you how to get them.

  How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
  Stores) can help to give a proper diagnosis of the machine.

  You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
  way off the machine. Then re-install Windows that "might" help if the problem is software partner.
  Of course, you will need to reinstall your programs and restore the data in the machine.

  Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
  reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
  do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
  the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

  Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
  What update because they will often rollback then repeat the installation until the correct version appears), modem
  and all of the other major features, you could have as 3rd party mouse or keyboard.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I view my Photos, they have a place and a date. How can I print them with that on them?

  When I view my Photos, they have a place and a date. How can I print them with that on them?

  You want to print the information on the image itself?  To do this, you will need to export the picture on the desk and edit it with a 3rd party image editor that supports the text and layers:

  Some Image editors that support layers and text:

  
  

  Photoshop Elements for Mac 11 - $79

  GraphicConverter - $40
  The Rainbow painter - $30

  Photos of affinity- $50

  FX Photo Studio - $30

  Inpaint - $20
  Imaging - $38
  Acorn - $50

  Pixelmator - $60

  Seashore - free

  GIMP for Mac - free (Yosemite & Mavericks only)

  

• When e Forwar recipients Mails get 5 or12 with gobblygoock on them?

  I regularly send emails from others with jokes about or shor videos and pictures to all my friends some i 25 or more, click forward in Live Mail and add all recipients of ITC and remove the senders email address and others who are attached.

  Recently, my friends get 12 or open emails more than a transmission with gobblygoock on them, or a room attached, they can no lnger.

  I did a scan for Malware and viruses and nothing comes, what is the problem with Live Mail. ?

  Thank you for taking the time to read all this and I thank you all for any help given.

  Ken's soon.

  It comes to Windows Live Mail? Menu button. Options | E-mail accounts | Properties | Advanced. Uncheck the box: "Break Apart Messages...". ».

  If it's not her, ask the experts here.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• What do all the Green icons with k in them?

  What do all the Green icons with k in them?  They accompany all hypelinks.

  Using Kaspersky?  If so it looks like it's maybe the Kaspersky URL Advisor: http://support.kaspersky.com/kis2012/settings/webav?qid=208284331

• What can I use on a dating site photo galleries and if yes can I use photos with people in them.

  What can I use on a dating site photo galleries and if yes can I use photos with people in them.

  It would be contrary to terms of use photos with people in them on a dating site.

• Restore default alarm / problem with 2 of them

  Hello everyone!

  I create a script to restore vCenter alarm on the default state.

  In fact, it's almost over because it works for 35 of them,

  but I am having problems with 2 of them who do not want to create.

  you can find the current version of my script here: http://ghostus.free.fr/Projet/PowerCLI/default-alarm.ps1

  (I commented the alarm two that do not work, then the rest of the code works)

  the part of the code that do not work is:

  Use of #Datastore to disk

  New 'or' 'Use of data to drive store' 'default alarm to monitor the datastore disk usage"

  7500 0 8500 metexpr 0 "Datastore" 147

  $global: alarmMgr.CreateAlarm ($entity. MoRef, $global: alarm)

  and:

  #Host State of connection and power supply

  New 'and' 'connection host and power status' "default alarm to monitor connection status and power.

  statexpr «isEqual"«notResponding" «runtime.connectionState"«HostSystem ' «»

  statexpr «isUnequal"«standBy" «runtime.powerState"«HostSystem ' «»

  $global: alarmMgr.CreateAlarm ($entity. MoRef, $global: alarm)

  but as it is the function of myself I'm not someone to see any error in there, except

  However, I wonder if some of you guys still managed create specially one of these 2 alarm using a script?

  And if yes, can you tell me, what type of event counter/expression/etc... have you used?

  Any thoughts on that would be appreciated = D

  I think I found the problem.

  It's in the way that the system will wait for the red and yellow conditions to be specified.

  If you don't want to test a specific condition, you must leave it as he got out of the constructor.

  If you change your statexpr like that function, it works.

  function statexpr([string]$operator,[string]$red,[string]$path,[string]$type,[string]$yellow){
  #Ajout d'un moniteur(expression) d'état(state) à une alarme
       $global:expr = New-Object VMware.Vim.StateAlarmExpression
       $global:expr.Operator = $operator
       if($red -ne ""){
            $global:expr.Red = $red
       }
       $global:expr.StatePath = $path
       $global:expr.Type = $type
       if($yellow -ne ""){
            $global:expr.Yellow = $yellow
       }
       $global:alarm.expression.expression += $global:expr
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Synchronization of a display multi-cam with no common point of sync (several clips that start before and after others)

  Hi all

  I recently recorded a production of theatre and because of some limitations of record on some camera, I've seen camera that is non-stop, and three others who cut inside and out for the big musical numbers or great moments, etc. Is it possible to create a view of multi-camera with multiple views, I, because none of them share a common point of synchronization? Is it possible to set multiple synchronization points and label all so that they can synchronize correctly? I'm sorry if it's very confusing! Thank you very much.

  Kyle

  multicamera Create Sequence of Source, with Sync Point, choose Audio

• First Elements 9, forced log-in with selection of themes?

  Hello everyone, I'm looking to create an instantmovie in first Elements 9. When I get to the select a theme page, I select a theme and click Next. When you click on a pop up appears to connect. I am aware of the problems with PE9 & photoshop.com not existing anymore. I read a lot of questions and answers on the Welcome screen, but that's not exactly my problem since I only get the newspaper in the command prompt when you select a theme. I cannot continue without connecting through the program. She also does if I select a theme in a standard project (not the instant film). I waited for hours for the online chat help, but it was completely useless. All he would say was that she was a "common" mistake, but offered 0 useful solutions. Help, please!

  Mimi13

  Please check the screenshot of the Cube of the photo of my Menus section of disc of Premiere Elements 9.0/9.0.1. It's certainly a photoshop.com more type. Do you look like this?

  

  You have the content for Premiere Elements 9.0/9.0.1 installation disc or you bought the program Online?

  You do not have the full content of the program. When you open the program, you get any message not having a full content? If so, you can get free full content for first Elements 9 from the following Web location:

  http://www.Adobe.com/special/premiereel/downloads/

  Please let us know the result.

  Thank you.

  RTA

• How to put two videos to play simultaneously on a PDF file with a common play button

  I know how to put videos on a PDF file. I'm looking for ways to have a common control button.

  I want to be able to play the files simultaneously and wind/return them as simultanousley.

  @markerline - this has nothing to do with InDesign.

  @Maesumi - you can send multimedia orders links and buttons in a PDF file. These include the ability to play, stop and rewind video annotations.

  Add two videos for the PDF using Acrobat Pro, and then create a button. Click on 'all properties' button 'actions' tab, choose "mouse up" and "multimedia operation Acrobat 9 and later versions. Click Add, and then select the first video and the operation to perform. The closure of the pop-up window, press Add and select the other video, more of the same operation. This stack two actions on the button. Repeat the process to create buttons play, stop, etc. According to your needs.

  The same thing can be done with a link, by choosing the type of "personal" link to open the dialog box actions.

  Note that with the widget video by default, you cannot bind controls playback bar in videos. This is only possible with a custom widget and some scripts.

• BLUE BUTTONS - AppleTV2 - I want to DO AWAY WITH all of them.  How?

  
  

  -FINISH WITH-

  
  

  
  

  BLUE BUTTONS

  Episodes of APPLE TV2

  
  

  -J' got about 120 left to watch! -

  I want to finish with all the BUTTONS BLUE shown next to all my TV Épisodes, all of which are showing that I have not yet looked at one of these episodes.

  I tried marking them all as "Unwatched" on my iTunes player - that works very well on the iTunes Player on my MAC, but, yet, "blue keys" still appear on the AppleTV2.

  1. How I was doing with a blue button MANUALLY?
  2. Or should I, in FACT, go through the hassle REQUIRED to watch each episode individually?
  3. Using a Media Player QuickTime, you can ALSO, actually does the job quickly?

  Select the TV program, press in and hold the Center button on the remote and choose Mark as watched in the context menu.

• Constant faults with satellite C660

  At the present time, I am more than just a little ticked off so I will try my best not to go off on a mug shot.

  Then I decided I would buy a laptop from Argos, I chose the Satellite C660 which cost me £300, and the first was faulty within weeks, it wouldn't read the Wifi card and I could not even anywhere near update even if that was the problem. So I had a second, worked well for 2-3 months, and then at the end of July it suddenly wrong.

  The error was with the hard disk, the hard disk had some how becomes corrupt, but firstly I decided I would buy recovery disks that cost £30 and took almost a week to arrive.

  Ultimately the recovery disks did not solve my problem so I rang the customer Service and they told me I could either send for repair, get a new hard drive sent me or send it to argos and get a replacement.

  Not even a month on the line and the SAME problems arose. Now I'm not sure that my anti virus was silly and allowed a virus to sneak into systems and corrupt once again, the concert stick which has been a cause of the second break was NOT used after to be sure.

  The anti-virus was Virgin Media Security Center, and even if some errors which is is past that have not been to painful difficulty it has worked well.

  But today, I uninstalled a program called Ventrilo so that I could reinstall it due to the fact that suddenly, she works correctly (suspect last night could be the beginning of my laptop once again to go to hell) last night, I used a Web site to see how I could completely remove ventrillo, and I followed the steps.

  As soon as I deleted the file ventrilo BAM the laptop went crazy! I rebooted, it don't think it would take just a reboot... once it is loaded, no background would show, a lot of error messages and I aircraft to the system restore 3 times. So I decided I want to reformat my laptop.

  That's where it went worse again, as soon as I entered the recovery disks the wrong hard drive shot, he began to reformat error only 5 seconds later saying no recovery of files found.

  Seriously toshiba, how much more portable that I am will have to be repaired or replaced before finally getting one that works 100%, why should not only claim a first thing in the morning, because ive got the reception has not been able to buy 3 years extra warranty (fortunately I still have 1 year of warranty) so I could do it now. im sick and tired of having a new piece of computer toshiba laptop for a short time then suddenly go faulty, especially when before you download anything, I make sure that I have downloaded to ensure responsible for anti-virus as his protégé.

  My moms laptop is HP and is 4 years old and STILL works very well, Yes, of course it heat up too much otherwise is based on a good surface, but still, how does a cell phone 4 years compared to a who apparently 3 months old laptop can work BETTER, is not what he supposed to be the other way around?

  EDIT: I just went through the forums, it seems that this brand has SO much go wrong with it in the first 3 pages only.

  Post edited by: Steelworkers

  Hello Steelworkers

  Sorry to hear (read) all that but what about?
  It's really funny in our life. With some things, we are more than satisfied and happy, but sometimes we just out of luck.

  Toshiba sells millions of laptops and probably thousands of Satellite C660 and there is always the risk that some of them are troublemakers. It is with other electronic products, cars, different machines and so on.

  I know you won t hear it but your only chance is to stay in contact with Toshiba service provider and if all goes well they will help you with all these issues.

  I must also say that over the last decade I have use Toshiba notebooks only. I had a few small problems too but it was always repaired quite quickly and I was able to continue my work.
  When you analyze markets for laptop, you will notice that the products are quite similar. You can't tell A manufacturer has much better quality than the manufacturer B. The level of prices is the same and the quality as well. What makes the difference is the hardware configuration and design, but all the rest is quite similar.

  One last thing: I agree with you on the old notebooks. I'm also sure that older models were much better, but what I can say for Toshiba tool Mr. I really missed some old models like Satellite 5200 or Satellite P20 of Mr. I had two of them, and I can say that they were ahead of the development and design.

  Bye and good luck.

• 9214 OR problem with a common mode error

  Hey,.

  I take readings using thermocouples type k using the NI 9214 module in a cRio.  System works very well at room temperature, but once I take the surroundings up to 300 ° C thermocouple, I get the error message: "a common mode error has been detected."

  I use the NI 9214 mode high resolution, with disabled OTD.  I went through the documentation on the error, but it is light on the proposed solutions.  I wonder if anyone else has seen this, and if so, how you solved it.

  Thank you!

  Hey GiantDeathRobot,

  Thanks for the reply! It was very useful.

  Let me start with additional information about my setup.  I use a k type thermocouple in a vacuum chamber to measure stuff inside.  I have the NOR-9214 in a just plug cRIO of data of the current temperatures.  Thermocouples are unshieleded in the room, but are exposed to the end inside the room.

  Your comment to the ground made me think that there might be a problem of noise EFM.  So I solved my problem in a weird Garland.  I had the commune for the NI 9214 connected to the nut of the common leg of the connector.  I added a ground cable from the power strip that I use to power all of the components of the House (including the cRIO) cRIO chassis.  This completely clears my noise problem.  I thought I'd follow upward, in case anybody out there is struggling with this as well.

• Comparing NaN constant (s) with buggy results!

  Hey people NI Forum!

  I know that I should be very careful when comparisons on point numbers because of rounding and representation issues.

  That said, I completely took off guard when I wanted a Boolean "true" If a number is NOT equal to "NaN"... I wasn't thinking too, slinging just wire a conditional fast for Terminal loop for a few tests, I was doing a temporary VI and put in place with a primitive "does not correspond to" (instead of the "Not a number/path/refnum" primitives.)

  The result took me by surprise, and when I dug into it, it became even more strange... it turns out that comparing a single constant itself will produce unexpected results too!

  Is this how it has always been, or what ' s NEW in LV 2015?

  I've included a LV 2011 version if someone wants to try on an old version... I ran this on a Windows 7 PC.

  

  While it would not make sense, it's well documented behavior.

  Documentation:

  EQUAL? Function

  If you compare two entries with the value not a number, NaN or an entry with the NaN value to an entry with a different value, this function always returns FALSE. Use the is not a number/path/Refnum? function to compare one or more entries with a value of NaN.

  (even for different?)

• Constant activity with L7780 wireless

  I have an Officejet Pro L7780 all-in-One connected to my Linksys router wireless WPA2. My computer runs Windows XP Pro SP3 and is wired to the router.

  I can print, etc. very well, but it seems to be almost constant activity communication between my computer and the printer - even when I'm not feeling. I can see the flashing lights on my router which tell me that my PC is in talks with the printer every few seconds. I can see corresponding activity on my PC Ethernet connection as well.

  I have the HP Digital Imaging Monitor running in my region notofication.

  My question is: is this activity of almost constant communication between my PC and the normal printer? I've never seen anything like this with any other printer or printers cable I can get through the router as a network printer shared. If the activity is not normal, how can I get it settled and only communicate when I print something?

  Thank you.

  the Monitor (DIM) digital imaging queries the printer regularly to update the status of the printer. in this way it can give you notice, if the printer is offline, or if the printer is having problems. If it affects the performance of your computer of your internet speed, so it's something to be worried, although no such problems have been reported before.