CCC vs Finder for copy of large directories

Similar Questions

• I lost my recovery disc, where can I find a copy?

  Hello

  After defragmenting my HD windows XP refuse to run again... I lost my recovery disc. How can I save some important data from my HD?
  Toshibe provides a copy of the recovery disk?

  Kind regards.

  You will not find the copy of the recovery CD. You must buy it DUDE ;)
  Contact the ASP in your country and ask for this CD.

  Good bye

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• I think to make the Surface RT but y at - it a soft for Windows that is Director basic that you can use?

  I think to make the Surface RT but y at - it a soft for Windows that is Director basic that you can use?

  Original title: windows essentials

  Hello

  Desktop applications only which can work to the Surface RT are Office Office RT and IE10. Apart from this, you will need to find a modern application (aka metro) of the Windows store.

  Thus, you can not install Windows Essentials, which is a desktop application on the Surface of RT.

  Video editing is very demanding on computer equipment/resources. Tablets are not the best devices for this type of work even if you do not find an app. I can see some video party 3rd edition apps on the Store Windows but I have no experience with them.

  Hope that helps.

• Has anyone found a way to add a shortcut key for copy properties?

  I went to the new model of Tween (motion tweens), and once I get it, copying keyframes is is no longer viable, I find myself with the context menu of hundreds of times a day to access the properties of the copy command.

  My natural instinct was to map a keyboard shortcut to that, but it is not listed in the menu of the mapping.

  Has anyone found a way, perhaps by scripts in order to achieve this goal? It's driving me crazy.

  It is strange that you can set a keyboard shortcut to copy the movement, but not for copy properties. Might be good to ask for the service:

  Feature request/Bug Report Form

• Where can I find a copy of Photoshop CS3?

  I'm trying to find a copy of Photoshop CS3. My paper has disappeared, but I am looking for a place to download so I can enter my serial number (that I had written down, fortunately!)

  You can download the demo version of the software using the link below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• How to copy a large file from "my documents" on a CD?

  How to copy a large file on a CD?

  Hi Richard Shield.

  Please see article with some information:

  http://support.Microsoft.com/kb/306524

  I hope this helps!

• The copy function blocks computer after an item is selected, and the computer is responsible for copy

  Original title: copy function

  The copy function blocks computer after an item is selected, and the computer is responsible for copy. It does not matter what size is the copy area. It usually requires a reboot hard to use the system.

  I tried to follow some of the instructions in a full Clipboard and unfortunately that is not the forms of the English spoken by them.

  Any help would be greatly appreciated.

  Denver

  d2n1cart@hotmail'com

  Hello

  We are pleased to know that the problem is solved. Let us know if face you any problem with Windows in the future.

• Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  I need the Guide quick start, as I have lost mine. A copy of the paper, as in a PDF file or similar.

  Hello

  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/products/home

• I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  I was promised 5 free plugins with purchase of first training pro / total bundle... dance and clearing the Board, foam, burst... where I can find for download

  There is nothing extra to download, these effects are included in the installation of After Effects.

  They are in these categories of effects:

  Simulation >

  Card dance

  Caustics

  Foam

  Shatter

  Wave World

  Transition >

  Card Wipe

  Generate >

  Radio waves

• where can I find for Essbas11.1.1.3 Excel Add-in installation instructions

  Hello
  where can I find for Essbas11.1.1.3 Excel Add-in installation instructions?
  In the past I have install the following address:
  Foundation_part1_v17397-01, Foundation_part2_v17369-01 and essExcelAddIn_11_113_V17388 - 01.zip
  
  But I lost the instructions.
  David

  There is a software component Excel plug-in 11.1.1.3 stand-alone Installer. The version is 11.1.1.3.11 and can be downloaded from "My Oracle Support" - patch # 9147550

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• copy the applications using the utility application for copy of HFM when users connected.

  Hi all
  
  I use utility application for copy of HFM to migrate applications in environments. Can we do the same thing when the users are logged in and active? I know that this utility copies just tables from source to destination, but I don't know if the copy will be successful if some tables are under edition of m.
  
  
  Thank you
  Rambeau

  Hello
  Don't run the copy utility appplication HFm when applications are in use. Let's say you have app1, 2, 3, 4, and you want to move app 1, make sure that app 1 is not in use.

  If some body accesses app2, 3 or 4, that you don't want to worry about that while moving app 1.

  Thank you
  Virginia

• How can I find a copy of windows 7 for dell Xps 15 (L502X)

  Hello evryone...
  I have a dell xps (l502X) lap top... it's operating system (Windows 7 Home peremium) resulted in a mistake... and there is now no thereon oparating system, and I have no backup dist to restore it... My question is: there were can I download my lap top operating system?
  Tanks

  You misunderstood what George wrote.  Dells have a "factory restore Partition" and reinstalling Windows procedure that is described in the manual of your PC.  For example, here is an excerpt from the mine-

  Reference Dell Factory Image Restore [excerpt from manual for Dell Inspiron 1545]
  1. turn on the computer.
  2 when the Dell logo appears, press several times to access the Advanced Boot Options window.
  Note: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.
  3. Select repair your computer.  The System Recovery Options window appears.
  4. Select a keyboard layout and click Next.
  5. to access the recovery options, log in as a local user. To access the command prompt, type administrator in the user name field, and then click OK.
  6. click on Dell Factory Image Restore. The Dell Factory Image Restore welcome screen appears.
  Note: Depending on your configuration, you may need to select Dell, then Dell Factory Image Restore factory tools.
  7. click on next. Data delete screen is displayed.
  Note: If you do not wish to continue Factory Image Restore, click Cancel.
  8. check the box to confirm that you want to continue reformatting the hard drive and restoring the system software to the factory condition, then click Next.  The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.
  9. click Finish to restart the system.

  - - - - - - - - - -

  You can find this information for your model on the Dell support website [through www.dell.com ] If you have thrown the manual of your PC and don't have any pdf copy of it.

  The manual of your PC will also be instructions for creating a set of "Recovery disc" and do this after the factory restore.

  In addition, the backup utility provided with Dells [mine is DataSafe Local, but that may have changed] has the ability to create a USB bootable from the "factory restore Partition" so that you can deal with a hard disk failure in the future.  So do because it is a valuable tool [an insurance against future problems] - they advised me to use a 16 GB USB key, but the image is only 6.2 GB so I could use a 8 GB USB key instead.

  Palcouk is also correct.  All this which may or may not have been provided with your purchase, Dell will provide a floppy disk to install OEM of Windows 7 on demand - the load is small, I think [I think I saw a post about it being $30].

• Directories of destination for copy files seeded in to test the page seeded in Jdeveloper

  Hello

  I need confirmation on how to place the JDeveloper environment to test a seeded page - specifically the directories of files copied from $JAVA_TOP and < PRODUCT_TOP > mds destination.

  I want to start (and possibly expand) a page which is owned by the module for example AP, I took copies of

  Set 1) all xml files in $AP_TOP/mds (including subdirectories, in ascii mode)

  Set of 2) all xml files of $JAVA_TOP (including subdirectories, i.e. all of the modules, in ascii mode)

  Set of 3) any type of files from $JAVA_TOP (including subdirectories, i.e. all of the modules, in binary mode).

  My local JDEV_USER_HOME is c:\dev\oaf\r1211\jdevhome\jdev. I understand that these files must be unzipped in one or more of the following directories JDEV_USER_HOME/myclasses and JDEV_USER_HOME/myprojects.

  Could he confirm what set of files goes into what directory (ies).

  Together 1 must be copied into myclasses only, or my projects only or both. Same question for Set 2 and 3 of the value.

  I tried different combinations, but not able to get the desired effect. for example sometimes the module of the application (for example, HomeAM) appears in the Jdev browser in oracle.apps.ap.payments.server duplicate. This has been fixed when I deleted all the files in my project class (so keep the class under myclasses only files), now the controller (oracle.apps.ap.payments.webui.HomeCOJava) disappeared from the node browser webui.

  We are on EBS R12.1.3. JDeveloper 10.1.3.3.0

  Thank you

  Sanjay

  Hello Sanjay

  Try the link, below it will give you an idea:

  http://apps2fusion.com/apps/14-FWK/456-iExpenses-OA-framework-R12-extensions

  Thank you

  David

• Problems copying very large folder to an external drive.

  The other day I tried to copy a far larger My Documents folder from the disk of Windows of a house system from XP to an external drive for backup.  He wouldn't let me.  I selected the folder of My Documents to copy, press Ctrl-C, then negotiated in the destination folder and press Ctrl + V.  What he did was simply created a shortcut to the folder destination.  However, I wanted the entire file to be copied.

  So I tried to use the Windows menu to do the same.  Then I noticed that the destination folder has the grey order dough and people with reduced mobility, but the paste shortcut command is available.  Finally, I had to create the new folder to destination and you drag the subfolders on.

  I tried to re - create the scenario on another computer with another external drive today.  I couldn't do it.  Could someone tell me under what circumstances this collage is not possible?  How can I overcome the problem outside of what I've done or through a DOS prompt?

  I discovered copy Document my folder must copy in the actual file.  We can find the actual file in the my documents properties.

  That's the ANSWER.