CCP on Windows 10
I had a strange question of the CCP after upgrade to Windows 10. It connected to my SO - 01 G Docomo Z3 as it should. But after trying to change contact or make a systematic backup, it does not work. No contact can be loaded phone. Backup app come normally but without jobs shown previous backup. Also when click on back up, all normal, choice of backup have shown normally, but after having clicked then the file name, then and error com upward as home of capture.
What is happening or PCC is not fully compatible with Win 10? With Win 8.1, no problem what so ever!
Try to re - start Z3 was no help.
Thanks for any help!
This problem is solved. All of this because of the right administrator work incorrectly. Windows all just dumb question.
Thank you all who read this.
Tags: Sony Software
Similar Questions
-
Creative Cloud for Windows package can create Mac package files?
CCP for Windows will create only Windows package and vice versa. We cannot create a Mac version Windows CCP package.
Kind regards
Romit Sinha
-
Hello... I'm past that I deployed Adobe Acrobat DC by opening Creative Cloud package, creative selection Cloud for businesses, creating a Package. I select Adobe Acrobat DC and create the package.
From there, I would use the customization took and go to the Exceptions folder, and edit. MSI. Then I push it using Dell Kace. After it installed I would push the. MSI in the generation of record folder.
After updating my creative cloud Packer, I created the package but noticed that the Exceptions folder was empty. The Acro.msi is now in an installation folder in the Build folder. I want to customize the. MSI and deployment at my neighborhood school. Something change now for the Exceptions folder is empty and how to deploy out to my organization?
Hi Mjreccoppa,
We are happy to share this with the new version of the Creative Cloud Packager, Acrobat DC would be part of the CCP on Windows package also.
He's more in the Exception file. Please do not hesitate to use the Customization Wizard customize Acrobat DC present in the installation folder ("
\Build\Setup\APRO15.0 \Adobe Acrobat\AcroPro.msi") Please, deploy or double-click on the file setup.exe from the CCP package, to install the complete package (including Acrobat DC).
Please see the detailed information to deploy Adobe Acrobat XI or DC
Thank you
Sumita
-
PS and LR no Serviço more every time I get on a screen that me says log in, what I do, then the window ^ next tre says said: CCP is now under [email protected]. Continue to take advantage of the software. I continue to click on and (drum roll) it sends me on the screen asking me to connect. PFFFF... qqun have a solution? Thank you. I already spent on the site in English. I got a response, but none of the normal staff works. Since they are absent. They might have more consideration pour those who are their subscription 50% more expensive Saitor USA. The European competition commission should look at the problem. Some North American cmpagnies were fined not sad. That it was my rant. But hey it of still 5 days and there are with that work.
Hello
Please see Re: loop "Sign in required" and https://forums.adobe.com/thread/1094836
Hope that helps!
Kind regards
Sheena
-
Can a Mac installation package be created from CCP on a Windows machine?
I'm sorry if this is also - I don't see an answer.
Can I run CCP on a Windows machine to create an installation package to run on a Mac? Or should I run the PAC a Mac to create this package? I have already created some packages for Windows, but don't see any .pkg files - I wasn't sure if the file was there and that Windows didn't just see it (?). I was hoping to find this information before you disturb my client - I do not have access to a Mac for testing.
Thank you!
No, this is not possible. You need to create packages on the same OS, they will be deployed in.
-
Windows fault of CCP to create a package with success...
Hi all
I tried to create a package of test with CCP. I limited to include only 11 updates and Acrobat to make the newspaper easier to follow:
OS: 8 64-bit Windows
10/09/2013 17:25:42 [INFO] AdobePackageBuilder - Build Version - 1.2.0.4
10/09/2013 17:25:42 [INFO] AdobePackageBuilder - verbosity Logging Level Set of 4
10/09/2013 17:25:42 [INFO] AdobePackageBuilder - TargetName successfully recovered from OptionXML.
10/09/2013-17:25:42 [WARN] AdobePackageBuilder - error in creating file for 7z exit test. Error code: 3
10/09/2013 17:25:42 [WARN] AdobePackageBuilder - pretreatment of the 7z file failed!
10/09/2013 17:25:44 [INFO] AdobePackageBuilder - extracted Sucessfully the product to C:\Users\tryhorn.tim\AppData\Local\Temp\{34378342-D2BE-465E-AF4E-313B6E4393A1}\ACCCx2_1_2 _232
10/09/2013 17:25:44 [INFO] AdobePackageBuilder - Extraction completed with return code = 0
10/09/2013 17:25:56 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.db)
10/09/2013 17:25:56 [INFO] AdobePackageBuilder - copied file (payloads\Media_db.sig)
10/09/2013 17:25:56 [INFO] AdobePackageBuilder - ASU to the path (C:\Adobe Pack
ages\Adobe XI of Acrobat, Acrobat 32-bit\Build\Setup\Adobe XI Pro_0\Set - up.exe) could not be found. Jump copy and rename.
10/09/2013 17:25:56 [INFO] AdobePackageBuilder - copy the contents of the 1 disc
10/09/2013 17:26:05 [INFO] AdobePackageBuilder - the file Setup.ini to Acrobat the custom wizard successfully created.
Even if a package is created if you try to run it, it crashes to the desktop.
Any ideas?
Thank you
Tim
Hi Servite College,
Could you please try a different network source to create a package.
In addition:
These host/port combinations need to be on a whitelist when connecting with one ID Adobe to download, install and activate licenses for applications via a creative cloud subscription.
- ccmdls.Adobe.com:443
- IMS - na1.adobelogin.com:443
- na1r.Services.Adobe.com:443
- prod-rel-ffc - ccm.oobesaas.adobe.com:443
- LM.licenses.adobe.com:443
- ccmdl.Adobe.com:80
- swupmf.Adobe.com:80
- swupdl.Adobe.com:80
Note: Be sure to 32 bit on a machine 32-bit and 64-bit packages on 64-bit computer.
Kind regards
Romit Sinha
-
Small window problem SCR24 Style cover
Hello!
I have a problem with the display window on my Xperia Z3 with coverage of style. It worked pretty well for about 2 hours, but after that it stopped display window. All I can do is to unlock the phone by opening the cover and also small window is the display when I make calls or receive a. I tried everything I could find on this forum, but nothing seems to work for me (I mean disable stamina mode, restart, reinstall theme, safemode, remove firewall and anti-virus, connection phone with cover via NFC again and again for a long time) if anyone knows what to do to make it work, I'd be happy to help.You could repair your phone with PCC
Bridge (for Mac)
Alternatives on how to backup Xperias
-
Why update on Lollipop with CCP has failed?
Hello everyone. I tried to update my phone using CCP, but I couldn't.
The CCP stated that there was no connected phone, even if I connect my phone with a USB cable. I have also
Enter the setting on my phone xperia connectivity-USB connectivity-USB connection mode-
checked the MTP mode. That's the thing I have to do, or should I select MSC mode.
I also tried MSC mode. The MSC mode the CCP could see my camera,
but when I try to backup my files using the CCP, a message appears and asks me to do this:
from your phone, please follow the instructions below. 1 - Unplug the USB cable from the phone and your PC. I've done and what's happening
(other things to do with my phone: 2 - go to settings-xperia-USB connectivity.3 - click on the USB connection mode)
4. Select MTP, then OK. 5 - connect the USB cable with PC and telephone)
I did, but a message pops up saying: connect the USB cable to the phone and your PC. If the CDP companion does not continue in 30 seconds
Unplug the phone and reconnect it. I did, but a message pops up saying that CCP could not connect to the phone, please
Disconnect, then reconnect. I did, but to no avail. Still get this message. I am running Windows XP sp3.
Can someone tell me if I missed something I need to do?I always get a notification to my computer screen saying that my phone (D6502) Z2 that Sony xperia is connected. I press on the message
go to the PCC, but nothing happens, I get another message saying that there is no phone connected.
Hi all
I just tried to connect my Z2 to a PC with Windows XP sp3 and got a
error when installing the driver, the solution
was to install the Microsoft User-Mode driver
Setting for WinXP. I think that this hotfix applies to all the android
devices, but I thought it was worth a post if it records some Z2 users and other brand too - all phones from sony, Samsung, HTC, LG, a phone with android
a long search.Thanks again to all who helped me.
-
Computer: Vista Home Edition Premium, SP2
My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »
I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.
This is the error in the event log
Log name: Application
Source: Microsoft-Windows-search
Date: 2011-08-09 16:49:45
Event ID: 3084
Task category: Gatherer
Level: error
Keywords: Classic
User: n/a
Computer: rb - CCP
Description:
Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available. .The event XML:
3084
0
2
3
0
0 x 80000000000000
380048
Application
RB - CCP
Search.MediaCenterHandler.1
A server error occurred. Verify that the server is available.
Hello
I suggest you follow the methods and check if it helps.
Follow the steps below and check if it helps.
(a) exit any running instance of Windows Media Center.
(b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:
%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
To remove the file, follow these steps:
i. Click Start and then click Run.
II. in the Open box, type run and then click OK
If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
IV. in the details, click pane right mediacenterdatastore.db and then click on remove.
c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.
(c) start Windows Media Center.
I hope this helps.
-
Windows Explorer, Internet Explorer, even aid keeps crashing on Vista Ultimate 64 bit
I loaded Vista Ultimate x 64 and it starts fine, but when running if I use Windows Explorer, Internet Explorer or even the help option, it stops (the app not the operating system).
When I use IE7 it tires to access a URL, then says "Internet Explorer has stopped working". When I click on the tab that says 'Find a solution online' or something to that effect, it can't find anything and shuts down. I am able to browse websites with Firefox.
Also, when I download a 32-bit application as the cleaner _, he warns also an assertion error. If I try again, it downloads and then I get the error:
ccsetup.exe is not an application Win32 valid Huh? I run it on multiple CPUs 32 bit on other machines. Y at - it something wrong with my Windows 32-bit on Windows 64-bit application. I ran all the diagnostic tests and there doesn't seem to be anything wrong with the disks, or other materials.
Hi nt5engineer,
Thanks for posting on the Forum of responses of Vista.
Is this a beta version of Vista?
Your screenshot does not appear on here.
You can use a free host of images photo, most are free.I've seen the same behavior in the past, but it is from a beta version of Vista.
No idea what software this might be:'D:\longhorn\ds\securityproducts\...\dynami...ues.cpp '.
The file extension "CCP" seems to belong to the C++ developer files.
You do programming on this computer?Impatience back on your part.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
OK, I am trying to sync my phone with my computer and get this message "a program error occurred at line 1548 dans.\OIAccess.ccp. Please report this error by sending a log to support"
now, BB is not a technical support - at least I can't find on the site - so I wonder if this has something to do with windows 8, since I just had a major problem with that... has anyone encounter the same error?
an additional note, I downloaded the software for PC 7.1 BB but installed BB office he says is 6.0 bundle 3049
Ah! already tried to fix it, uninstalled and reinstalled and still the same error on sync.
Thank you!
Hi socorroAC,
It seems to me that you have a registry error line event that says Desktop software to search for something that there more access also. You have access to a registry cleaner like Registry Mechanic? Some Internet Security packages also offer this feature. What I would recommend is to uninstall the Desktop software using the method described in the following link:
http://www.BlackBerry.com/BTSC/KB02206
Once this is done, restart your computer, and then run the registry cleaner. Then, restart your computer once more, then re-download and reinstall the BlackBerry Desktop Software from http://blackberry.com/desktop.
I hope this helps get you operational return.
-
PPTP VPN between clients Windows and Cisco 2921 router
Hi all!
I have a problem with PPTP VPN between Windows clients and router Cisco 2921 with permission of RADIUS (IAS). When I try to connect to Cisco 2921 of Windows 7 by using MS-CHAP v2 I get the message 778: it was not possible to verify the identity of the server. Can I use PAP - power is OK. On Windows XP, the same situation.
Cisco config:
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname gw.izmv
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
AAA new-model
!
AAA authentication ppp default local radius group of
!
AAA - the id of the joint session
!
clock timezone + 002 2
!
No ipv6 cef
IP source-route
IP cef
!
!
Authenticated MultiLink bundle-name Panel
!
Async-bootp Server dns 192.168.192.XX
VPDN enable
!
VPDN-Group 1
! PPTP by default VPDN group
accept-dialin
Pptp Protocol
virtual-model 1
echo tunnel PPTP 10
tunnel L2TP non-session timeout 15
PMTU IP
adjusting IP mtu
!
redundancy
!
interface Loopback0
IP 192.168.207.1 255.255.255.0
!
!
interface GigabitEthernet0/0
Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE $ 0/0
IP 192.168.192.XXX 255.255.255.0
IP 192.168.192.XX 255.255.255.0 secondary
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/2
Description - Inet-
no ip address
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
PPPoE enable global group
PPPoE-client dial-pool-number 1
No cdp enable
!
!
interface virtual-Template1
IP unnumbered Loopback0
IP mtu 1492
IP virtual-reassembly
AutoDetect encapsulation ppp
by default PPP peer ip address pool
PPP mppe auto encryption required
PPP authentication ms-chap-v2
!
!
interface Dialer1
the negotiated IP address
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP pap sent-username DSLUSERNAME password DSLPASSWORD
No cdp enable
!
!
IP local pool PPP 192.168.207.200 192.168.207.250
IP forward-Protocol ND
!
!
overload of IP nat inside source list NAT_ACL interface Dialer1
IP nat inside source static tcp 192.168.192.XX 25 expandable 25 82.XXX.XXX.XXX
IP nat inside source static tcp 192.168.192.XX 1352 82.XXX.XXX.XXX 1352 extensible
IP route 0.0.0.0 0.0.0.0 Dialer1
!
NAT_ACL extended IP access list
deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255
deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255
deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255
deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255
permit tcp 192.168.192.0 0.0.0.255 any eq www
permit tcp 192.168.192.0 0.0.0.255 any eq 443
permit tcp 192.168.192.0 0.0.0.255 any eq 1352
permit tcp host 192.168.192.XX no matter what eq smtp
permit tcp 192.168.192.0 0.0.0.255 any eq 22
permit tcp host 192.168.192.XX no matter what eq field
permit tcp host 192.168.192.XX no matter what eq field
permit tcp host 192.168.192.XX no matter what eq field
allowed UDP host 192.168.192.XX matter what eq field
allowed UDP host 192.168.192.XX matter what eq field
allowed UDP host 192.168.192.XX matter what eq field
!
host 192.168.192.XX auth-port 1645 1646 RADIUS server acct-port
Server RADIUS IASKEY key
!
control plan
!
!
!
Line con 0
line to 0
line vty 0 4
line vty 5 15
!
Scheduler allocate 20000 1000
end
Debugging is followed:
14:47:51.755 on 21 oct: PPP: Alloc context [294C7BC4]
14:47:51.755 on 21 oct: ppp98 PPP: Phase is
14:47:51.755 on 21 oct: ppp98 PPP: using AAA Id Unique = 8 b
14:47:51.755 on 21 oct: ppp98 PPP: permission NOT required
14:47:51.755 on 21 oct: ppp98 PPP: via vpn, set the direction of the call
14:47:51.755 on 21 oct: ppp98 PPP: treatment of connection as a callin
14:47:51.755 on 21 oct: ppp98 PPP: Session Session handle [62] id [98]
14:47:51.755 on 21 oct: ppp98 TPIF: State of the event [OPEN] [initial check]
14:47:51.755 on 21 oct: ppp98 PPP LCP: switch to passive mode, State [stopped]
14:47:53.759 on 21 oct: ppp98 PPP LCP: exit passive mode, State [departure]
14:47:53.759 on 21 oct: LCP ppp98: O CONFREQ [departure] id 1 len 19
14:47:53.759 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)
14:47:53.759 on 21 oct: ppp98 TPIF: AuthProto MS-CHAP-V2 (0x0305C22381)
14:47:53.759 on 21 oct: ppp98 TPIF: MagicNumber 0xF018D237 (0x0506F018D237)
14:47:53.759 on 21 oct: ppp98 TPIF: event [UP] State [departure at REQsent]
14:47:54.351 on 21 oct: ppp98 TPIF: I CONFREQ [REQsent] id 0 len 18
14:47:54.351 on 21 oct: ppp98 TPIF: MRU 1400 (0 x 01040578)
14:47:54.351 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)
14:47:54.351 on 21 oct: ppp98 TPIF: PFC (0 x 0702)
14:47:54.351 on 21 oct: ppp98 TPIF: RAC (0 x 0802)
14:47:54.351 on 21 oct: LCP ppp98: O CONFNAK [REQsent] id 0 len 8
14:47:54.351 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)
14:47:54.351 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq-] [REQsent to REQsent]
14:47:54.751 on 21 oct: ppp98 TPIF: I CONFACK [REQsent] id 1 len 19
14:47:54.751 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)
14:47:54.751 on 21 oct: ppp98 TPIF: AuthProto MS-CHAP-V2 (0x0305C22381)
14:47:54.751 on 21 oct: ppp98 TPIF: MagicNumber 0xF018D237 (0x0506F018D237)
14:47:54.751 on 21 oct: ppp98 TPIF: State of the event [receive ConfAck] [REQsent to ACKrcvd]
14:47:54.915 on 21 oct: ppp98 TPIF: I CONFREQ [ACKrcvd] id 1 len 18
14:47:54.915 on 21 oct: ppp98 TPIF: MRU 1400 (0 x 01040578)
14:47:54.915 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)
14:47:54.915 on 21 oct: ppp98 TPIF: PFC (0 x 0702)
14:47:54.915 on 21 oct: ppp98 TPIF: RAC (0 x 0802)
14:47:54.915 on 21 oct: LCP ppp98: O CONFNAK [ACKrcvd] id 1 len 8
14:47:54.915 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)
14:47:54.915 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq-] [ACKrcvd to ACKrcvd]
14:47:55.275 on 21 oct: ppp98 TPIF: I CONFREQ [ACKrcvd] id 2 len 18
14:47:55.275 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)
14:47:55.275 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)
14:47:55.275 on 21 oct: ppp98 TPIF: PFC (0 x 0702)
14:47:55.275 on 21 oct: ppp98 TPIF: RAC (0 x 0802)
14:47:55.275 on 21 oct: LCP ppp98: O CONFACK [ACKrcvd] id 2 len 18
14:47:55.275 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)
14:47:55.275 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)
14:47:55.275 on 21 oct: ppp98 TPIF: PFC (0 x 0702)
14:47:55.275 on 21 oct: ppp98 TPIF: RAC (0 x 0802)
14:47:55.275 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq +] [ACKrcvd to open]
14:47:55.295 on 21 oct: ppp98 PPP: Phase is AUTHENTICATING,
14:47:55.295 on 21 oct: ppp98 MS-CHAP-V2: O CHALLENGE id 1 len 28 of 'gw.izmv '.
14:47:55.295 on 21 oct: ppp98 TPIF: State is open
14:47:55.583 on 21 oct: ppp98 MS-CHAP-V2: I ANSWER id 1 len 71 of "domain\username".
14:47:55.583 on 21 oct: ppp98 PPP: Phase TRANSFER, tempting with impatience
14:47:55.583 on 21 oct: ppp98 PPP: Phase is AUTHENTICATING, unauthenticated user
14:47:55.587 on 21 oct: ppp98 PPP: request sent MSCHAP_V2 LOGIN
14:47:55.591 on 21 oct: ppp98 PPP: received LOGIN response PASS
14:47:55.591 on 21 oct: ppp98 PPP AUTHOR: author data NOT available
14:47:55.591 on 21 oct: ppp98 PPP: Phase TRANSFER, tempting with impatience
14:47:55.595 on 21 oct: Vi3 PPP: Phase is AUTHENTICATING, authenticated user
14:47:55.595 on 21 oct: Vi3: given msg No. MS_CHAP_V2
14:47:55.595 on 21 oct: Vi3 MS-CHAP-V2: SUCCESS O id 1 len 46 msg is "tG @ #QDD @(@B@ (@[email protected]/ ** / @I @:[email protected]/ ** / @@@ EJFDE)).
14:47:55.595 on 21 oct: Vi3 PPP: Phase is in PLACE
14:47:55.595 on 21 oct: Vi3 CPIW: protocol configured, start state cf. [original]
14:47:55.595 on 21 oct: Vi3 CPIW: State of the event [OPEN] [Initial report on startup]
14:47:55.595 on 21 oct: Vi3 CPIW: O CONFREQ [departure] id 1 len 10
14:47:55.595 on 21 oct: Vi3 CPIW: address of 192.168.207.1 (0x0306C0A8CF01)
14:47:55.595 on 21 oct: Vi3 CPIW: event [UP] State [begins to REQsent]
14:47:55.595 on 21 oct: Vi3 CCP: protocol configured, start state cf. [original]
14:47:55.595 on 21 oct: Vi3 CCP: State of the event [OPEN] [Initial report on startup]
14:47:55.595 on 21 oct: Vi3 CCP: O CONFREQ [departure] id 1 len 10
14:47:55.595 on 21 oct: Vi3 CCP: MS - PPC supported bits 0 x 01000060 (0 x 120601000060)
14:47:55.595 on 21 oct: Vi3 CCP: event [UP] State [begins to REQsent]
14:47:55.599 on 21 oct: % LINK-3-UPDOWN: Interface virtual-access.3, changed State to
14:47:55.603 on 21 oct: % LINEPROTO-5-UPDOWN: Line protocol on Interface virtual-access.3, changed State to
14:47:56.027 on 21 oct: Vi3 LCP: I have TERMREQ [open] id 3 len 16
14:47:56.027 on 21 oct: Vi3 LCP: (0x2F7C5F7E003CCD740000030A)
14:47:56.027 on 21 oct: Vi3 CPIW: event [BOTTOM] State [REQsent on startup]
14:47:56.027 on 21 oct: Vi3 CPIW: State of event [CLOSE] [begins with initial]
14:47:56.027 on 21 oct: Vi3 CCP: event [BOTTOM] State [REQsent on startup]
14:47:56.027 on 21 oct: Vi3 PPP DISC: MPPE required not negotiated
14:47:56.027 on 21 oct: Vi3 PPP: sending Acct event [low] id [8B]
14:47:56.027 on 21 oct: Vi3 CCP: State of event [CLOSE] [start with initial]
14:47:56.027 on 21 oct: Vi3 LCP: O TERMACK [open] id 3 len 4
14:47:56.027 on 21 oct: Vi3 LCP: event [receive TermReq] State [Open to stop]
14:47:56.027 on 21 oct: Vi3 PPP: Phase ENDS
14:47:56.027 on 21 oct: Vi3 LCP: event [CLOSE] [off status of closing]
14:47:56.675 on 21 oct: Vi3 PPP: block vaccess to be released [0x10]
14:47:56.675 on 21 oct: Vi3 LCP: event [CLOSE] State [closing closing]
14:47:56.679 on 21 oct: Vi3 LCP: event [BOTTOM] State [closing on Initial]
14:47:56.679 on 21 oct: Vi3 PPP: compensation AAA Id Unique = 8 b
14:47:56.679 on 21 oct: Vi3 PPP: unlocked by [0x10] always locked by 0 x [0]
14:47:56.679 on 21 oct: Vi3 PPP: free previously blocked vaccess
14:47:56.679 on 21 oct: Vi3 PPP: Phase is BROKEN
14:47:56.679 on 21 oct: % LINK-3-UPDOWN: Interface virtual-access.3, changed State to down
14:47:56.683 on 21 oct: % LINEPROTO-5-UPDOWN: Line protocol on Interface virtual-access.3, state change downstairs
I'll be very grateful for any useful suggestions
We had the same problem using MS-CHAP-V2 and 3945 router using IOS 15.2. When you add the same combination of username/password locally it worked fine but it wasn't no of course of the solution. We have solved this problem by adding the following line in the config file:
AAA authorization network default authenticated if
This is because Windows 2000 clients require the use of a statement of authorization aaa in the router config. Maybe it was default (and therefore not shown) previous iOS releases.
Success!
Wil Schenkeveld
-
Abobe creative cloud does not display the app menu on Windows 10
Hello, I use windows 10 and my creative cloud abobe does not display the app menu. Can you help me?
WHITE cloud screen http://forums.adobe.com/message/5484303 can help
- and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
- and step by step http://forums.adobe.com/thread/1440508?tstart=0
-
my menu CC drop down window is white
Hello
Running Mac Pro early 2009
OS X 10.11.2
My CC menu dropdown window is white.
Emptiness of the graph.
I was lance lightroom directly from my folder of the application.
All of the suggestions.
Allan
WHITE cloud screen http://forums.adobe.com/message/5484303 can help
- and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
- and step by step http://forums.adobe.com/thread/1440508?tstart=0
-
I have not used Lightroom 4 a while and after I clicked on the icon a "?" appears on the icon. I went to the menu creative cloud on the bar menu, and click on the drop-down window ther was empty (the window where I could install or reinstall Lightroom and other applications). Don't know how to solve this problem.
WHITE cloud screen http://forums.adobe.com/message/5484303 can help
- and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
- and step by step http://forums.adobe.com/thread/1440508?tstart=0
Maybe you are looking for
-
Hello I have a hp dv 3 z 1000 cto entertainment pc and the screen still flashes. I called microsoft, but they told me that it's a hardware problem. Can someone give me advice how can I solve this problem?
-
Lets imagine that we measure the size of the stream of movement of particles. Some of them, or just a particle of dirt that adheres to the surface of the window and is counted almost all time (image). Y at - it VI or what would be the suggestion how
-
I have a HP 64 bit, the computer randomly stops, no screen blue, everything stops and goes to sleep... I had 2 technicians to look at, but since it is random, they have been unable to find something that would make this...?
-
Export to Adobe PDF format to export the file
It is impossible for me to find where can I export a PDF file to word to edit and printI see when I'm in a PDF document, I hit on the right side of the conversion in Word, I sign my connection does not work then I hit pay once again.He takes me to th
-
How can I activate Adobe Acrobat Professional 7?
How can I activate Adobe Acrobat Professional 7? I have Windows 10. The program will run well in Windows 10 - I already did. However, the activation program options no longer work. Help, please!