"CCP registration Service server application has stopped working".

Similar Questions

• "Application has stopped working" - in windows 7 double started with windows server 2003.

  I did a system to dual-boot with windows server 2003 and windows 7 both 32 bit.

  Server works well, but in windows 7, not a single application as 'MS office', 'Adobe Reader10', "mozzila FF 17', USB modem software etc. can be installed." Application has stopped working-check online for the solution, close the program "-l' display message."

  These applications have been executed successfully on the same windows 7 installed alone, stand not to dual-boot.

  As for example, in the case of Mozilla, I get the following details of problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Installation of Firefox 17.0.1.exe

  Application version: 4.42.0.0

  Application timestamp: 5080c0b6

  Fault Module name: Firefox Setup 17.0.1.exe

  Fault Module Version: 4.42.0.0

  Timestamp of Module error: 5080c0b6

  Exception code: c0000005

  Exception offset: 00029000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: c828

  More information 2: c8281d65ef26473d0d73e61539f36991

  3 more information: c4b2

  Additional information 4: c4b2e9bb96fe79d0a8d8b1d891ab6cf4

  These BONES are compatible?

  What is the solution?

  Help, please.

  Thank you...

  Hi Sounak,

  Thank you very much for the detailed information.

  You did changes to the computer before the show?

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know the result.

• "Share" feature in the Finder (or other applications) has stopped working.

  Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

  The Share button shows 'No. Service' or missing menu items?

  https://support.Apple.com/en-us/HT203129

  If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

  https://support.Apple.com/en-us/HT204904

• On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

  Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

  Hi 9gonz9,

  Welcome to the Microsoft Answers site!

  You get this error message when you start the desktop computer?

  You can check if the complete startup items are checked in the msconfig utility.

  1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click the Startup tab and check if all the items are archived there.

  You can also run a bag of security for your computer and check if this solves the problem.

  http://www.Microsoft.com/Security_Essentials/

  If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NService Application has stopped working and was closed to popup on the desktop, when I first boot my computer.

  Original title: NService Application has stopped working and was closed

  Recently, I see this popup on the desktop when I start my computer first – 'NService Application has stopped working and has been closed. "

  What is - this and why I am see?

  Thank you!

  Hi Lee,.

  1. have you made a recent software or hardware changes to the system?

  2. is your system connected to a domain?

  Nservice.exe seems to belong to IBM Lotus Notes / / Domino from IBM.

  Method 1:

  If you use applications such as Lotus, then you can try to uninstall and reinstall to fix the problem.

  Note: Make sure that you have the CD or downloaded installation files to reinstall the program.

  For more information, see the articles:

  Uninstall or change a program

  Install a program

  Method 2:

  Otherwise, you can perform a clean boot and check if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• LUpdate Application has stopped working Windows Vista starts.

  Original title: LUpdate application error

  At the start of my Vista laptop it comes up with an error that says that lupdate Application has stopped working.  How can I get that back to work?

  Thank you

  Hi Revbob,

  1 did you recent hardware or changes to the software of the system?

  2. are you able to boot into normal mode after receiving the error message?

  If you can boot into normal mode, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Error message "Xtray application has stopped working."

  I get the following error messages when I start my computer and enter the part of Windows Vista from the boot sequence.  I am able to close these error messages and works normally, but I fear that they could be a precursor to more serious problems later.  Anyone who understands what is perhaps the underlying problem and how to fix it would be greatly appreciated.

  Error messages

  1. "the procedure entry point? 0CAlert @ QAEQW4ALERT_TYPE@PAUHWND_@@HPB_W2222H2HH_N@Z not found in the Win32RenderingEngine.dll dynamic link library. »

  2. "XTray Application has stopped working".

  Google has no useful info relating to your problem.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.
   

• Cannot use DVD BD Player: WIN DVD MFC application has stopped working

  Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
  now every time I try and use DVD BD drive I get the following message:

  "WIN DVD MFC application has stopped working"

  I tried to use restore point, but still get it, can anyone advise please?

  It will be interesting to know what model of laptop you have.
  Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

  I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

• Satellite L500 - DMIcheck application has stopped working

  Some of my drivers won't install givin message "DMIcheck application has stopped working" or similar for pInfo application...

  Same installation of 64 bit Windows 7 on another laptop didn't have problems like that.

  How to solve this?

  model laptop is L500 (short model No. PLJSHE)

  Hey,.

  To me that sounds like that the DMI information is missing, and if you get this error message...
  You use the Toshiba drivers directly?

  Usually the DMI information is missing, if the motherboard was exchanged and technicians forgot to re - write this information.
  In this case contact the guy again and they will do that for you! :)

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• Satellite L300-1AQ - Bluetooth tray application has stopped working

  When I put my laptop it comes up with an error that says:

  * bluetooth tray application has stopped working *.

  A problem has caused the problem to stop working correctly.
  Windows will close the program and notify you if a solution is available.

  Anyone who has a solution?

  The laptop is a Satellite L300 - 1AQ
  Didn't it monthly!

  Please help, thanks

  XX

  Hello

  Have you tried to reinstall the battery Toshiba BT?

  Usually, this will help you get rid of this error message.
  Here you can download the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.

  Good bye

• Want to m6: Catalyst Control Centre: host application has stopped working

  Whenever I start my computer, I get the following message every time that a few months:

  "Catalyst Control Centre: host application has stopped working".

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Please how can I get rid of this or get whatever the problem is solved?

  Thank you.

  Hello

  Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Issue of satellite A300 Catalyst Control Centre - host application has stopped working

  At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

  Has anyone else with similar problems.
  I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

  Any suggestions?

  Hello

  I googled for this error message and found many people having this problem.
  It s not related to the laptop, but for the driver
  Who knows why.

  In any case, in most cases the people solved this problem by the new driver Catalyst installation.
  You should do this;

  -upgrade your Vista to the last State
  -remove the old system catalyst
  remove/uninstall the graphics since the device manager driver
  -Restart the computer and reinstall the driver and catalyst

  Should work!

• DRM activator application has stopped working

  play the games of big fish and a few weeks ago drmactivator application has stopped working shows up as a message and I can not play all games except those supplied with the computer - how can I fix this problem

  If you receive the DRM activator error message do the following to correct the problem.
  1 left-click on start
  2 - right click on computer
  3 - left click on properties 4 - left click on advanced system settings
  5 - running, click settings
  6. left click on the parameters of Performance data
  7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
  8. click on apply and then OK.

  UAC: (User Account Control)
  Open Control Panel and type in the user account in the search box. You will see the link for "turn User Account Control (UAC) or not". Until it clicks. Uncheck the box and restart your computer