CD/DVD drive do not write!
I have a HP Compaq 6735 s with a TSSTcorp CDDVDW TS - L633L ATA Device and during the last few weeks, he was not able to burn discs. It seemed to happen from one day to the next, I tried various different software and have concluded that it is certainly something to do with the player.
Each software States that the CD/DVD has burned successfully however, the CD/DVD cannot be read by anything, not even the computer, he wrote of.
Someone at - it solutions? I've looked everywhere and can't find any similar problem?
Hello
Download ImgBurn , and use this to see if you can burn a disc successfully. If this does not help, try to run the process below.
First, try the automated Microsoft fixit on the links below.
Check if the drive will now burn.
If the drive does not, in the Start Menu, open Control Panel and click Device Manager. Click to open the IDE ATA/ATAPI controllers. Right-click on the first channel and select uninstall. Do not delete if requested drivers. When uninstalled repeat the process for each channel. Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives. Right-click on the drive and choose uninstall. Do not delete if requested drivers.
Restart the computer and let Windows reinstall devices. Check the disc again.
If it still does not work, re-run the fixit automated Microsoft at the link below.
Then, in the Start Menu, open Control Panel and click Device Manager. Click to open the CD/DVD-ROM drives. Right-click on the drive and choose uninstall. Do not delete if requested drivers. When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar). Let windows reinstall the disc and see if it now Burns ok.
Best wishes
DP - K
Tags: Notebooks
Similar Questions
-
DVD drive does not write - Satellite M40X-175
Im having a problem with my dvd. I tried to burn my movies, music and my files on a dvdr or cdr, I tried DVD - RW and CD - RW but I do it every time gives error "d:\ is not accessible incorrect function". but when I try to watch a dvd movie or use my music cd, it does not work. He reads. Does this mean that my dvd drive cannot be read and not write?
[Edited by: admin on 4 February 06 20:23]
Hello
Satellite M40X sounds new enough to have CDs of feature writing. Seems to me a HW question but you can try:
1 - Clean the blank CD with a cloth dry
2 - blow to the goal and do not forget that there is no dust
3. you can uninstall the driver from
-> Panel-> system-> hardware-> Device Manager-> DVD - RAM-> (right click) properties--> driver uninstall-> restarting your laptop.If they do not contribute, you can contact a Toshiba authorized Service partner. You can find the one nearest to http://217.45.123.236/toshiba/resellerselector.nsf/WebServiceProv?OpenForm
-
DVD drive does not write most of the time
Please, I would like to help here:
1: HL-DT-ST DVD-RAM GH22LS30 ATA Device "SATA".
This device well read no problem at all, but it well not write more then about 5% of a DVD and then he throws. With the help of the Super Multi Drive LG installation disc.2: cannot install: Microsoft SALIOU adapter
3: cannot install: Microsoft tity Tunneling adapter
4: cannot make a backup of the systemDETAILS: Windows 7 Ultimate
Processors = processors Dual Core AMD (tm) 4450e
Processors = processors Dual Core AMD (tm) 4450e
3 GB of Kingston
2 HD 1 TB every time good job of SATA.Thank you in advance for any help you can
The DVD player may require cleaning with a cheap kit that you can buy at any place that sells computers. I had good experience with my readers DVD LG, not to mention my LG TV that I love. One thing you can do when you are trying to burn DVDs would be to reduce the burn speed. I usually use the software Roxio or Nero to burn DVDs - they have always worked well for me.
Relative to the backup, use one of these big drives for backup and you get a good 3rd party backup program like the free Easeus todo backup free of charge that you can download from
http://www.todo-backup.com/products/home/free-backup-software.htm . Better yet, you get an external hard drive. You can buy these days 1.5 to ones for about $90.
Good luck.
-
Of Satellite A100 CD/DVD drive does not write CD
My A100 running Vista cannot burn CD whatever CD I insert for registration, do not see it A100. DVD burning is OK. Weird and irritating. Can anyone help?
SHello
Don t use Roxio program to burn the CD.
Use Nero! It of much better! I also use it and I m very happy.I noticed that Roxio modifies the registry key, and so sometimes the CD/DVD drive cannot read or burn some mediums.
Delete the Upperfilter and UpperFilter in this key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
and restart the laptopGreetings
-
Drive DVD TS-L632D not write & burning CD and DVD
I have a portable Hassee W230r with a tsst ts-l632h DVGW DVD player.
Recently, the DVD drive is not burning DVDs or write data on DVD discs.
It allows to write DVD OK, but now after it said burning was a success, there's nothing on the disc.Sometimes it sucessfully writes CD, other times it fails, especially when creating audio CDs and t plays most of the DVD (although sometimes he jumps about 5 minutes before you load the CD and DVD)
I can't find a driver for it, and to be honest Im not sure of time I should be using a driver, or "firmware".
I have dual boot XP and Ubuntu Hardy 8.04. Ubuntu Hardy comes with its own drivers for Hardware, but I get the same problems using Ubuntu on Windows. Which made me think that it was a hardware problem.
The laptop is 6 months old.
Thanks in advance for any help.
> I have a laptop of Hassee W230r
It is a forum of Toshiba and discuss us problems on Toshiba laptops.
Your laptop is not a Toshiba machine!
I recommend to ask support from the laptop manufacturerGood luck
-
CD / dvd drives will not read / write to any disk
Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use service pack 2 and I have installed a new software/hardware. my computer is a dell XPS 420 that is now three years old and this is the first time that I had any problem that I have not been able to solve. Help!
Hello
Its not unusual for the same problem have an impact on both drives, in fact its very common.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Satellite L500-13D-CD/DVD drive does not read CD
Hello
I have a Toshiba Satellite l500-137 laptop with vista sp2.
There is a cd writes that my dvd drive would not read, the driver can read other CDs & DVDs well.
who says cd's seems to be fine as it can become red from the other computer.any suggestions?
* Thanks to *.
Hello
That means only one disc can be read from your laptop and all other disks can be read properly? Well, in my opinion, it could be a disc problem, maybe it's striped s and so it can t be read to all readers.
In your case, I would try to clean the lens of your CD/DVD drive. Therefore, you can use a microfibre cloth.
Check it! -
CD/DVD drive does not read discs on Equium A100
My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.
Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.
Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.
If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
After phone restart the operating system will recognize and initialize the disk again.
After this review of the procedure if you can read, write the middle. -
My DVDRW DRIVE will not write to disk
My DVD - RW drive will not write to disk, it is only recognized on my computer as a DVD ROM and CD - ROM only. I looked in Device Manager and there is no question mark by it and he says it's working properly, I had it works normally about 2 weeks ago, can you help me? L.M.Baggley
If it worked about two weeks ago, you could try a restore point to return the parameters of your system they had previously, by using the system restore. It is in the startmenu, all programs, system, SYSTEM RESTORE tools. Choose a point of older and not the most recent. Alternatively, right - click the icon for your drive and make sure that the recording tab is there, and that registration is enabled on the computer. You will also find it better if you record at a slower speed and not the faster if you want to avoid reading errors. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »
-
CD/DVD drive are not not in Device Manager
Original title: CD-ROM/dvd-rom _
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My DVD drive does not appear in Windows Explorer
This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD. No DVD, CD or even disks with files stored on them.
When I open windows Explorer, the drive from DVD (e) is not even more appear. I was wondering how to fix this.Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE
MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.
I DON'T KNOW WHAT IT IS.
I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.
IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.
HELP PLZ
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean power
and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Hey,.
My DVD drive is missing from 'my computer '.
When I go to Device Manager, there is no label listed cd/DVD
Drivers exist in the registry
I tried to remove the UpperFilter/UpperFilter and restart without success
I tried reinstalling the drivers without success
The drive is powered on, because when I place a disc in the drive, it will try to read it - the disk will turn and the lights of access will be lit.
Nothing happens, no autoplays work.
Any suggestion welcome thank you.
Info:
I am running windows vista Home premium
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html===================================
After the foregoing:
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
-
CD DVD drive does not. Error code 10. Microsoft It planned is "fix.
CD DVD rom does not. Listed in Device Manager, with yellow warning sign, and when clicked, says Error Code 10. Running Vista Edition Home Premium
Description of errors related to the 10 Code that generates the Device Manager in Windows on computershttp://support.Microsoft.com/kb/943104Try the resolution on the following link:The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vistahttp://support.Microsoft.com/kb/929461Also seethis discussion:FixIt did not work the first timehttp://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-write-to-DVD-drive-Windows-Vista/791d88ac-73b2-48da-a18c-723c0b08a587 -
CD DVD drive does not recognize inserted the disc: Code 19
Windows cannot start the CD-ROM/DVD-ROM device because its information configuration (in the registry) is incomplete or damaged (Code 19). The CD-ROM/DVD-ROM device is a: HL-DT-ST DVD - RAM GH40L ATA Device on an HP Pavilion Slimline
Hello
Here are a few articles that will probably solve your problem.
Your CD or DVD drive is missing or is not recognized by Windows or other programshttp://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Mark <> Microsoft Partner
Maybe you are looking for
-
Why scrolltop stop working in firefox 36?
I have a script of jquery scrollTop who works for years, but doesn't matter since I loaded Firefox 36. The script still works in Chrome and IE, so it must be a problem with FF. The script is the following:function scrollTo() {}var e = document.getEle
-
half of ff gets black on Facebook During the passage of a message
-
Touchscreen doesn't work is not for the Satellite U920t - 10 p
Please read this completely before you answer with your copied and pasted answers. My touch screen lets you stop work, but was still attached with a reboot of the machine.Now it doesn't work at all and * I've tried everything posted elsewhere in this
-
OfficeJet Pro 6830: No returns label attached to the new product
-
Turns off Windows Defender itself
I turn Windows Defender on every day. Can someone tell me how to solve this problem? I have Windows Vista.