Satellite L500-13D-CD/DVD drive does not read CD

Similar Questions

• Satellite L500-126-CD/DVD drive does not open very well unrolled

  Hello

  I just got my second Satellite L500-126.
  I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

  Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
  Is this normal?

  Also, when I close the dvd player, I hear a little noise "ping!"
  Like a spring, or something. Is that also normal?

  Thanks in advance.

  Hello

  I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
  This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
  Still, you will hear a short click Open and close the drive.

  So I guess it's ok.

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye

• Satellite L655-106-CD/DVD drive does not read disks

  Toshiba satellite L655-106 dvd rom reads all types of CD as white.
  I have run the registry cleaner and re-installed the driver but no effect

  All disks are not readable?
  Try to clean the lens laser alcohol or cotton tip.
  Then try again

• CD/DVD drive does not read discs on Equium A100

  My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.

  Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.

  Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.

  If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
  After phone restart the operating system will recognize and initialize the disk again.
  After this review of the procedure if you can read, write the middle.

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD drive does not read

  I lost my device manager dvd and can not get it back.  Of course, I can't read the dvd player.  I have removed the upper and lower registry filters and removed and re-inserted the disc.  I also bought an external hard drive and the material has been recognized and installed but doesn't always have showe upward on the Device Manager and have not loaded a dvd.  Is my computer and HP Pavilion dv9500 laptop and runnig Vista Home Premium

  Hello

  It is not rare when you have this type problem so that it can affect more than one/all CD and/or DVD
  readers.

  Step 1: Please do all the same underneath if you did some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive on someone with the same model (s).

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite Pro A30: CD/DVD drive does not-how to restore the OS?

  I want to run the recovery discs to restore my laptop to its original state, but the cd/dvd-rom does not work.

  Does anyone have an idea how I can do this is by plugging my laptop on another pc or is there a program on the web, I get to do this for me.

  Bacically, even after that run CCleaner and other programs of the laptop is still slow and struggled.

  Hi mate

  I'm not very well if the former satellite Pro A30 is able to boot from USB drive Mr. in this case, you can try to install the OS from USB flash stick.

  Here's an interesting ad on this theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63986

• Satellite L50D-B - faulty DVD drive does not recognize discs

  Bought 2 months ago. The reader agrees not the CD, DVD or anything like that.
  The name of the drive does not appear on the disc and if you double click on the DVD drive icon (even if a disc is inserted) the drawer opens and says please insert a disk. I tried several discs are not the issue.

  So far I got technical support where I bought it.
  They said to do a reinstall I did - with the full drive clean. I tried to update the drivers, but the computer insists on the fact that they are later. If I search my model number on the site of Toshiba driver support he gets rejected, and I have no access to (Toshiba) drivers.

  I checked a few other forums and tried the regedit fix, but which is also irrelevant. If no solution is found (and I've lost hours of my life on this subject) then this laptop is going back for a refund and I'll get one who will perform the simple task of playing a DVD.

  Windows 8.1
  PSKUQA - 01300-S

  Hello

  Sorry to hear that you have such a stupid problem with your machine. On this virtual path, it is not easy to say what the problem is here.
  In my opinion you should not waste your time checking and search for some drivers who probably will not help at all.

  Reinstall the original operating system that you have with your machine and test functionality with the factory settings. If the result is the same contact your reseller or Toshiba service provider directly and ask for help. They can check ODD and Exchange if necessary.

• Satellite L300D-13s - CD/DVD drive does not close properly

  Hello

  I have the L300D-13s, about a week.
  Today and for a short time last Sunday the DVD drawer is not closed.
  I rebooted several times and tried to put the disc in but again, she is ejected and does not read disks.

  I installed Norton 360 Version 2.0 the day I got it, I really don't know much about computers and I hope that it's fairly simple.

  I checked the control panel and checked all the settings and they all seem fine.

  I'd appreciate any help.

  Thank you.

  Hello

  I think it s a mechanical problem of CD/DVD disc and you should contact the ASP in your country for a control.
  I mean that the guarantee must be valid because this laptop does not seem to be old.
  Therefore ask the ASP, and maybe the CD/DVD drive must be replaced.

  Good bye

• SD-L622A CD/DVD drive does not read some CD - Satellite L300-144

  Reader TOSHIBA SD-L622A.
  The drive does not boot with Windows XP Service Pack 3 CD, starting with the diagnostic utilities CD (IMHO 2 CD format).

  Also, these CDs do not see a car even under Windows XP, Vista.
  My wife bought Toshiba L300, but another change. There are player Matsu * a (Panasonic).
  Problems with the same discs was not raised.

  PS Sorry for a terrible English. My mother tongue is Russian :)

  You created the recovery DVDs?
  Laptop can't see this recovery DVD?
  Have test you with Linux Live CD?

  Your laptop can recognize content of different CD/DVD (movies, music, data) under operating system?

• Qosimo G20: Device i/o error - DVD drive does not read CD

  Hi, im having a problem with the dvdrw drive on the G20 PQG20E Qosimno, it does not read discs, the only drive that reads without problems is to restore dvd and Heroes (dvd movie) and origonal CD, it does not read any cd s that are not original.
  I get a "D:\ is not accessible.
  The request could not be performed because of an i/o device error"

  Anyone have any ideas?

  Thank you!

  Simon.

  Hello

  I guess the discs not all burnt gift? t working in this player.
  I know that not all media work on all players. In the manual, you should find a list of tested and good work supports.
  I recommend that you test the CD and DVD that is recommended in the user's manual.

• The CD/DVD drive does not read discs

  Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc.  It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system.  I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same.  Hope that there is another work around here... Thank you...

  Have you tried using other burning software?

  Try this free you see if you receive messages.

  http://CDBurnerXP.se/

• COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER

  DEAR MEMBERS

  V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM

  PLS COMMENT

  URS

  SGUPTA

  
  

• Satellite A200-AH5 CD/DVD drive does not burn any CD

  I have a laptop Toshiba Satellite (A200 AH3) under Windows Vista Home Premium.
  For what it's worth, there's a T2085 @ 1.73 GHz processor. It is a 32-bit operating system.
  In the Device Manager when I click on the CD/DVD-Rom drives, I get CD/DVGW TSSTcorp TS-L632D ATA Device.
  By clicking on this that I find that the driver is working correctly and up-to-date. I was not able to burn a CD on this system...

  I have not tried to burn a DVD.
  I ran through all the steps to burn a CD, however, but even if he goes through the process to show the progress that each song to a playlist is burned to disc, when the disc is supposed to be finalized... nothing on the disc when I try to read, and with the exception of iTunes or another program open when I place the CD in the drive to be played absolutely nothing happens.
  I tried to burn music on a CD on the desktop of my sister, and it burned fine.

  Then... It is not a problem with the discs.
  When I took the disc to my sister had burned and placed in the disk drive on my laptop, it displays the tracks that had been burned and he played the music very well. This really threw me a loop for.
  The laptop is only a year old and I can not burn anything.

  Unfortunately, the warranty has expired. I am desperate to get this problem fixed. I don't know if he's going to burn a DVD, but I ruined 2 boxes of CD - R discs already. After disk supposedly burned music... even if no music has been burned... the disc is ruined and must be discarded.

  I'm not terribly knowledgeable about aspects of warming of the computers, so I hope you can tell me in general terminology if you answer to my problem. I really hope someone out there can advise me as to what is happening or what I should do to fix the problem.

  Thanks for any help in advance!

  Thank you.

  Gord
  Canada

  Hello

  In your case, I recommend trying the different CD s from different manufacturers.
  You should know that not all CD or DVD would be fully compatible with your internal CD/DVD drive.
  In many cases no compatible CD or DVD would lead to exactly the same problems that you described in your post so trying different media!

  In addition, I recommend checking the Toshiba driver for a CD/DVD drive update page s firmware.
  As I m not wrong not the Satellite A200-AH3 belongs to the Canadian series and you should check the Canadian page for a new firmware. Maybe a new firmware is available

  Last but not least, you can switch to other burning software I m using Nero I think it s the best applications for such purposes