CD / & DVD Player cannot read or write__

Similar Questions

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• My dvd player will read disk now but my cd player won't can anyone help

  Hi, my dvd player will read disc now, but my cd player can not help everyone, also the copy of microsoft sent with the computor is not the same as that installed Wndows xp media center edition 2002 that they sent is as it says on the windows disk mredia Center version 2005 with update

  Update Rollup 2, can anyone advise me what to do?

  Hi Albert,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 questions:

  1. The DVD works fine while the CD player does not work.
  2. You have Windows Media center 2002 edition installed on the computer, however received the disc with Windows Media center edition 2005.

  I would like to know if the understanding is incorrect.

  To solve the first problem, I suggest you visit the link and try the methods in the knowledge base article.

  How to troubleshoot common problems that occur when a Windows XP-based computer

  Cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

  For the Windows Media center disc sent bad, you will need to contact the Microsoft customer service. Check the link for more information.

  http://support.Microsoft.com/kb/302822

  Let us know if you have any further questions. We will work together and solve problems.

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• HP probook 4530 s CD-ROM/DVD-ROM cannot read the disc.

  Hello, pls can someone help me? my hp ProBook 4530 s CD-ROM/DVD-ROM cannot read DVD when I insert spin them on Windows 7 32bits. Thank you

  Hello:

  See if performing each resolution steps 2, 3, 4 & 5 fix the problem.  One usually does.

  http://support.Microsoft.com/kb/314060

• My CD/DVD drive cannot read or write media.

  I get a message to insert a disc, but it is already in it.   When I reinsert the disc, I get the same message.

  Hello

  Looks like the drive has a problem, possibly a cleaning disc might help if he and the
  below are questionable solutions to what sounds like a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• My CD or DVD drive cannot read or write media

  Both my cd/dvd readers do not read the discs, they say just please insert disc when it is already inserted.

  Hi Metalmick,

  Method 1:

  Try running the fixit from the link provided below >

  
  Reference:

  
  Your CD or DVD drive cannot read or write media.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems
    
  Method 2:
      
  I recommend you to uninstall and reinstall the drivers and see if it makes a difference, also check the firmware updates.
    
  You must be logged on as administrator to perform these steps.

     
  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in Device Manager, look for the CD/DVD and then double-click the device name.
  c. click on the driver tab and then click on uninstall the driver, and then follow the instructions.

    
  Reference:

    
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works.

  Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works. I have treid to restore files but can not solve the problem. Or I can rip my CD

  Original title: windows media player

  Hi Felix,

  
  Welcome to the Microsoft Community Forums!
  
   
  From the description of the problem, it seems that you can't play music on Windows Media Player.
  
   
  Help me with more information.
  
   
  1 is this problem specific to music files?
  2. did you of recent changes on the computer before this problem?
  3. What is the exact full error message?
   
  I suggest the steps and check if that helps
  
   
  Method 1
  I suggest you to perform the following troubleshooters.
  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  You can try to use the troubleshooting Windows Media Player settings Troubleshooter to automatically find and fix some common problems. See the link below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Method 2
  If the problem is not resolved I would suggest you follow these steps and check if it helps.
  Step 1:
  Disable and enable Windows Media Player and check if it opens.
  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; clear the check box Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.
  Note: If windows media player 12 is already disabled, follow the steps mentioned below:
  After the restart, follow these steps:
  g. click on start and select Control Panel.
  h. click programs and features.
  i. click on Turn Windows features on the left side on or off.
  j. develop media features; Check the Windows Media Player.
  k. click Yes and OK to continue.
  a. restart the computer.
  This would be re - install windows media player 12.
  Refer
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Windows media player cannot read CDs and DVDs

  MS supports says my Player DVD is dead and needs a new drive. So, I just install a new ROM DVD and still have the same problem - cannot read CDs and DVDs.

  When I play the CD, I always get the error meessage--(lecteur Windows media a rencontré une erreur lors de la lecture de lecteur de CD en mode numérique...). 'Digital' is selected under the tool-> properties-> device.

  When I play DVD, it is frozen my laptop or keep spinning and froze the Windows Explorer and the reader.

  I was able to read DVDs and CDs once after a few restart. During playback of CD the WMP abruptly stopped with error message and since that time cannot play CD DVD & more.

  So far, I did a few fixs that I found online and nothing wroks:

  * No upperfilter or UpperFilter registry

  * Uninstall and let the laptop automatically reinstall the driver

  * Ms. Fix it gives different results every time I run the fix-(1) detects no problem and therefore no patches have been applied (2) the main media in the CD drive is not readable (same CD has played correctly when using external USB DVD rom)

  Can someone help and let me know what that could be the problem and how to fix it! Thank you!

  Hi Amy,

  You can read the following article to clear the Windows Media Player database and check if it helps.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  If you have any third-party media player installed on the system, then check if the DVD player works with it.

• Re: Satellite A200 - DVD player can read but cannot write

  Hello

  Some time ago my DVD writter has stopped working. I have Windows 7 with the latest toshiba drivers.

  The DVD is very good playback of the inserted cd/dvd, the unit is OK in Device Manager, but when you write a DVD it fails somewhere over 50% with "unknown error."

  I tried Nero and standard windows app.

  What do you recommend?

  Hello

  Did you test different DVD from different manufacturers?
  I had a similar problem in the past and since I use TDK R DVDs and CDs and these discs work correctly.

  I also recommend cleaning the DVD player with alkohole laser lens and the tip of the batting.

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• Satellite U300 - CD/DVD drive cannot read disks

  My CD/DVD drive does not work.

  It can be heard at work (or maybe working), but it cannot read the discs - music films or niether. The 'properties', says the disk is full, but can not read the contents. Neither is it give details of the content.

  If I run iTunes or Real Player, suffice to say it is a blank disc in the drive and told me to get ready to burn to a disc. But in his own info says that the disc is full! Windows XP sees the drive in 'Properties' and said that it is complete, but does not display the contents of the disc. Devices, said the drive (type HL-DT-STDVDRAM GSA-U10N) "working properly".

  I have turned off the HDD (software protection movement) protection because he stirs a warning whenever the unit darn picked. I tried to use the drive with it on and outside. My computer is 18 months old (I think), but this problem has existed for a year and gets more and more frustrating.

  Help please.

  Hello

  You can find enough son here in the forum about problem of CD/DVD disc then please use the search function of the forum first.

  I founded an interesting thread for you you need to check:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162032

• Satellite Pro U200: DVD - RAM cannot read media

  Greetings

  I have a problem with a carpet * a DVD-RAM UJ 8425 in my notebook U200.
  When I insert the CD or DVD in the engine, it cannot read the media.
  The engine starts and runs disc twice or three times, then turn of.

  I have this laptop for 2 months, and only since yesterday, I have this problem.
  In Device Manager it is shown in working order,
  I have change the driver but it's still doesn't work...

  Can you help me to find out where is the problem?

  Hello

  It will be interesting to know does this happen with all sorts of data on the disks. Try checking Autoplay options in the ODD properties.

  By the way: you can see the contents of the disc in Windows Explorer?

• Satellite Pro L510 - computer laptop Toshiba DVD - RAM cannot read disks

  My laptop toshiba Satellite Pro L510 computer may not play all discs as I installed Microsoft Expression Studio 4 by using the original CD... now whenever I insert a disc, the dvd - ram turns the disc for a few seconds and thn stops spinnig.

  Then drive shows that there is nothing inside the disk and it is completely empty.

  I can't even restart my operating system discs cannot be read from the bios either.
  I uninstalled the drive, the updated drivers, but it did not help. Please help me, I really need to use dvd ram... I use windows xp sp2 and using the laptop for 8-9 months...

  Help, please!

  http://www.Microsoft.com/UK/expression/products/StudioUltimate_SysRequirements.aspx
  According to this statement you must have installed Windows XP SP3 home edition.

  Your ad is a bit confusing to me. You have a problem with the functionality of DVD - RAM or optical disc drive cannot read all drives (different CD, DVD, DVD - R formats. DVD + R and so on)?

  I put t know what is the problem with the optical disc drive, but way generally, an installation of software packages has nothing to do with ODD when you use it as first boot device.
  > I can not even restart my operating system discs cannot be read from the BIOS either.
  Restart or reinstall?
  Is a readable recovery DVDs when you try to start the recovery image installation?