CD/DVGW TSSTcorp TS-L632M ATA device does not not (code 10)

I use Vista on my HP laptop.  Try to read a cd and it does not start.  When we look into it, I discovered the adapters don't is not loading and cd/DVGW says it is working properly.  The drivers are up to date just does not load.  Isn't it so please help!

First do the following:

http://support.Microsoft.com/default.aspx/KB/929461

If no joy then this:http://support.microsoft.com/default.aspx/kb/310123

I would like to start in SafeMode - Device Manager - remove all instances of the drive and restart. It will be re - install itself. Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

Tags: Windows

Similar Questions

  • CD/DVGW TSSTcorp TS-L632M ATA Device is not reading DVD

    Original title: TSSTcorp TS-L632M ATA Device CD/DVGW

    I have a HP laptop and have a problem with the DVD device. It doesn't read the DVD - RW. It shows me that the DVD is empty. I tried with DVD which worked without any week issue two or three, but now they are unable to read. I tried to use a Microsoft Fix it on the site, but it could not solve the problem.

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ===========================================

    This troubleshooting could not help if there is alignment and/or wear issues however it
    a shot.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Device does not (Code 31)

    PoppyJoe.joe has real problems and really needs "HELP".

    Device does not work (Code 31) windows cannot load the drivers required for this device.
    Device type: network adapters
    Manufacturer: Atheros Communications Inc.
    PCI Slot 6 (bus 5 PCI, device 0, function 0)
    Resource settings:-this device isn't using any resources because it has a problem.

    Note:-I uninstalled by mistake all the com ports, thinking that when I rebooted my laptop with Win Vista (Home), that windows would automatically re - install the com ports, as it were, beforehand.  "I made a blunder really."    Now, how I tackle this situation?    Thank you...   Poppyjoe.Joe.

    Hi Poppyjoe.Joe,

    Code 31

    This device does not work properly because Windows cannot load the drivers required for this device.

    Step 1: I suggest you download the drivers from the manufacturer's website.

    This refer below link provided to visit the Web site of the manufacturer of your:

    http://www.Atheros.com/pt/index.html

    Step 2:

    Reference:

    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • TSST DVD +-RW TS H653B ATA Device does not work

    I get the following error message

    Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried to reinstall the driver for the TSST DVD +-RW TS H653B with no luck.  I've also removed the device and close for the computer to recognize the device and he did, but impossible to install the driver.  I downloaded the lateest for the device driver with no luck either.  I also did a full stop, with drain power and pulled the plugs of the device and put them back in and have pulled up, still with no luck.  IM of ammunition at this stage.

    Hi Jmanjordan,

    You can try this step but, if that doesn't work then you may need to contact the manufacturer of the drive for further assistance. Open the link below and click the Fixit .

    http://support.Microsoft.com/kb/929461

    Bindu S -Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

    error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Normally the above will solve this problem otherwise working your way down through them, even if you did
    them before.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • Re: Toshiba DVGW/hd ts-l802a ata device issues

    Well, I'm not sure what happened, but between last week and this week, when I insert a CD or DVD in my laptop, it does not read them. In my device manager, there's a little warning! symbol "Toshiba DVGW/hd ts-l802a ata device" under CD-ROM/DVD-ROM drives. It shows this message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

    I don't know if I uninstalled something by accident, or if it is another problem entirely. Can someone please tell me what to do? I want to be able to play movies on my computer again!

    Thanks in advance!

    Hello

    What operating system do you use?

    If you are using Vista, please check http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  • Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

    Hello

    Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

    List of paths esxcli storage nmp
    SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
    The Runtime name: vmhba0:C1:T1:L0
    Feature: naa.600508e0000000007abafa971050a900
    Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
    Group status: Active
    Table priority: 0
    Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
    Path selection policy path Config: {current: Yes; favorite: Yes}

    FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
    The Runtime name: vmhba2:C0:T3:L2
    Feature: naa.60050768018105afc000000000000df0
    Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
    Group status: Active
    Table priority: 0
    Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
    Path selection policy path Config: {current: Yes; favorite: Yes}

    Kind regards

    Surya

    Hi Surya,

    No, it's not any problem with the configuration of your path.

    It only means that this policy does not allow additional configuration.

    I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

    Your current configuration does not offer this option.

    Kind regards

    Ralf

  • my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

    my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

    If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

  • Equium P300-16 t - Synaptics Pointing Device does not work correctly

    I hope someone can help.

    Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver

    Looking forward to any help you can give.

    Suggest that you reinstall simply touch pad drivers. Maybe new version?
    So, just uninstall drivers, restart your computer, reinstall the drivers.

    Drivers are located on the download page of European drivers.

  • SD-R2312 device does not appear in the hardware Manager

    I have several problems with my Toshiba SD-R2312 Windows XP. Cannot open CD, device does not appear in the hardware Manager, drive is not displayed anywhere.

    First time it happened, I was able to reactivate it as described here.
    http://www.TechSpot.com/VB/all/Windows/t-28912-desperation-Toshiba-DVDROM-malfunction-possible-missing-driver.html

    After working for a few weeks, the drive is 'gone' once again, same symptoms as the first time.
    Try the registry fix again, I found that there are still "UpperFilters" (which I've deleted again), but not Lowerfilters.
    However, which did not help this time.

    I have no "unknown" devices that I could delete (see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6548&messageID=22638).

    Does anyone have an idea how to get the drive working again? Is there a way to prevent that from happening again?

    Thanks in advance.

    Hello

    If the drive is not displayed in Windows Explorer, perhaps this method can help. Try it!

  • Satellite L300-19F and WXP - audio device does not work

    Hello

    I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

    BTW: he used to work on Vista.
    What should I do?
    And thank you

    -Download driver audio Realtek HD Realtek page.
    -Go to the Device Manager
    -Remove the sound card.
    -Remove the High definition Audio Controller
    -Restart the laptop.
    -Reinstall the Realtek HD audio driver

  • Satellite U400-17R - audio device does not work after installing XP

    Hello

    I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.

    Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.

    I'm lost... Can someone please help?

    Hello

    I think you have the same problem like me a few months ago.
    I installed Win XP SP2

    The t is not his work because I didn't install the patches MS; KB835221 & KB888111

    The patches must be installed as a first step, before the audio driver is installed.
    If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.

    PS: The MS patches are part of the SP3

  • Pavilion dv6 7011tx: bluetooth device does not

    my bluetooth device does not work, so I uninstalled the bluetooth software and install the new driver. now while I'm installing the new driver, it indicates "no bluetooth device was detected. Please make sure that your bluetooth device is connected correctly in order to continue installation '.» Please help me

    Hello:

    You can try reinstalling own W8 and see if the BT radio appears.

    As he was working on W8, he must have worked on W10.

    I assumed you are passed directly from W7 to W10, and if you had the connection manager software installed in W7, which could adversely affect the BT radio does not not on W10.

  • dose of the device does not react to the C++ code

    Hello.

    I have meassuring keithley 237 system, connected to the port COM4.

    And I commands manual keithley insturment.

    When I use assistant LabView Instrument IO and put in "query and analyze" the steps of these commands, the device reacts as it should.

    But when I try to write and run my own C++ code, device does not react.

    just no reaction at all!

    Maybe someone can help me and tell me what's missing.

    Here's my C++ code:

    #include #include "visa.h"
    
    using namespace std;int main (int argc, char *argv[]){       ViStatus status;    ViSession defaultRM, instr;    /* Open Default RM */    status = viOpenDefaultRM(&defaultRM);
    
        if (status != VI_SUCCESS) {        /* Error Initializing VISA...exiting */             return -1;        }
    
        /* Access other resources */    status = viOpen(defaultRM, "ASRL4::INSTR", VI_NULL, VI_NULL, &instr);
    
        // here I send commands to device    viPrintf(defaultRM, "F1,0X");           //  "F1,0X" and all another symbols in "" are just commands from keithley manual.          viPrintf(defaultRM, "B1E-6,0,X");    viPrintf(defaultRM, "L11,0X");    viPrintf(defaultRM, "P3X");    viPrintf(defaultRM, "O0X");    viPrintf(defaultRM, "N1X");    viPrintf(defaultRM, "H0X");
    
        viClose(instr);    viClose(defaultRM);
    
    return 0;}
    

    Hello

    There is an obvious problem in your code: viPrintf () accepts as a first parameter a session handle, which is "instr" variable returned by viOpen () in your case. Using the default resource manager leads to incorrect results (BTW, you must add to your code an error checking: I expect viPrintf () to return VI_ERROR_INV_OBJECT or similar error).

    As long as an additional indicator, I noticed that you use no termination for your messages: you should check in the documentation for the device if you need to add a stop character (the instruments most want a '\r' or '\r\n' sequence at the end of the messages to accept).

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

Maybe you are looking for