CD rom is not working properly

Similar Questions

• Satellite M30: CD ROM is not working properly

  Hi all

  Please bear with me - I am a newbie to this!

  I have a Satellite M30 and have problems with the built-in DVD ROM S6112 player.

  It plays fine bought audio cd and rips OK. Does not seem to play bought DVD of either. Can not burn blank CD - R or RW or copy files of data on it. Does not recognize any kind of blank discs - clicking noise once the disc is inserted.

  I had to buy a drive hard ext (non-Tosh) that works very well on all the above - but it is not convenient for me to carry the entire hard drive in my work!

  Can someone help pls. ?

  Rgds

  Mike

  Hello

  These disc problems usually occur because the wrong lens calibration.
  In this case, there is nothing to do and especially the replacement of the drive may solve the problem.
  But first, you should try to remove the drive from Device Manager. After restarting again the operating system should recognize the drive again.
  You can also try to run the troubleshooter in the properties of the drive.

• 1805 - S154: DVD - ROM is not working properly.

  I have a toshiba satellite 1805-S154, and I just started to use it again. The dvd - rom is more will play DVD, it will run CD but whenever I put in a dvd - rom, nothing, it will not read the disc. Anyone know why this happens and how how can I solve this problem?
  Thank you.

  Hello

  Well, have you tried to remove the DVD drive of the device?
  You must remove the drive from Device Manager. After the restart of the unit of the OS will recognize the DVD player again. Perhaps this procedure will help you fix this strange problem.

  Good bye

• Satellite A30 - CD-ROM does not work correctly

  My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?

  Looks like catch 22. Someone at - it help him?

  I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• Hello on the program is not working properly, please return the money to buy other best program and thank you

  Hello on the program is not working properly, please return the money to buy other best program and thank you

  A faulty program that has not been purchased Mali returned from four days

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?

  My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.

• I think Firefox is getting worse, because there are many Web sites that does not work properly with it, while my other browser Google Chrome can.

  There are many sites, but I will say only 1 site because I have very bad memory, so here's the problem, Web site Furaffinity.net, search for his website may not work properly with Firefox, its advanced research, help and toggle the button description can be click but nothing happened after a click. However, my other browsers, Google Chrome and INTERNET EXPLORER horrible can work properly. I tried to fix it by resetting Firefox but it doesn't work.

  Thank you, and I take back what I said about Firefox getting worse.

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• GasBuddy web site not working properly with firefox, but works very well with Explorer

  I noticed when I load the site gasbuddy.comweb, it does not work properly. It does not load, simply do not perform as it should. When I try to use gasbuddy.com to explore 9, it works very well. I already tried to work in safe mode and it does not solve the problem with gasbudy.com. Any suggestions on how to solve the problem? I made a discovery, and I'm very careful about deleting my cookies. It seems that when I do the procedure, I'm losing too much info on some web sites - weather.comweatherunderground, etc.. Just do not know how to delete cookies for a problem with the cause of other problems? Thank you.

  Could check you your zoom here:

  ALT + v (open the menu Classic view) > Zoom > Zoom text only

  If I have this on (checked) then the middle column moves to the right and superimposed on the right column. If I have that turned off, then the page zoom correctly.

• Pandora radio is not working properly, they saty I need to upgrade to a newer version of firefox. Not very clear how to do this? fire fox says I have an old version. I need help to update, why it so difficult?

  Pandora radio is not working properly, they say I have to upgrade to a newer version of Fire Fox. Fire Fox very little makes it clear on how to do it. I'm not a computer genius! I have an outdated version. Summer

  You are using Firefox 3, which is the previous major version. The current version is Firefox 7. I'm not familiar with your Facebook plugin, so I don't know if it is compatible. If it isn't, Firefox will automatically tell you and ask you if you want to check the updates. You can download the installer of Firefox 7 by clicking here.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.