Drive hard not in my computer but device and computer management Manager

Similar Questions

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• How to account user, allowing that file executable permission... not allowed to open the drive hard partition c, d, e, f, g and documents, etc.

  How to account user, allowing that file executable permission... not allowed to open the drive hard partition c, d, e, f, g and documents, etc.

  like Firefox allowed to open and Office World etc.

  and the scores of disk c:d:e:f: documents and unauthorized change setting.

  Hi UMIR,

  Assistance to your topic that you are looking for is more complex than what it is treated in this forum. It would be better suited in the Technet forums where the it professional can suggest you a solution regarding the same. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/

  I hope this helps.

• Control Panel is not on the list. Users and local groups does not appear in computer management.

  1. click on start, and then point to setting, control panel is not on the list.  When you try to get to the Panel of control via a link in Help and Support, had an error, "operation has been cancelled due to restrictions in effect on this computer.  Contact your system administrator. »

  2. local Users and Groups does not appear in computer management.

  There is only one profile on the PC, the OS is XP Home.  It seems lost his administrator privileges somehow my user profile.  Could you please suggest how to solve this problem?  Thanks in advance.

  Hi PJohnson,

  You can access the link below and follow the steps in the article to create a new user account and copy the data to the new account.

  http://support.Microsoft.com/kb/811151

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IDE DVD drive is not showing in BIOS, but projection in computer

  Hello

  I recently installed a new motherboard (Asus P5LD2 REV 2.01). ALMOST everything works fine - Windows 7 is installed and giving great performances. However, the IDE DVD drive does not work very well. It is connected to the primary EIDE channel on the motherboard and will NOT show in the main screen of the BIOS. However, it will show in the BIOS priority boot device, analysis of FDI and the F8 boot Menu. It also shows in COMPUTER and disk management. The IDE DVD Player loads and plays the discs very well! The main problem with it shows is not in the BIOS is this: after the computer, the computer has been turned off for a certain period of time, when I try to turn it on it restarts several times until the "Starting Windows" stage lights. The only way to solve this problem is by entering and leaving the BIOS, or entering the F8 boot menu and selecting HARD - which always does not restart. In addition, when the computer is turned off for a long period of time, sometimes I have no display or beep MESSAGE until I have turn works a few times, or press the reset button. The hard drive shows in the BIOS and is connected to the PRI_IDE (blue) port. I tried two CD-ROM drives, to replace the DVD IDE drive, and they're just right in the computer do not give any display or beep POST. The hard drive light continues flashing in the same schema, when an IDE CD drive is connected. Without a connected optical drive, nothing works. Y at - there no fix for the problem with the DVD IDE drive not no projection in the main screen of BIOS with random restart problem? Event Viewer displays an error of power core for every time that happened.

  Thank you very much!

  Brandon.

  My computer specs:

  Motherboard - Asus P5LD2 Rev 2.01.
  -Intel Core 2 Duo 1.86 GHZ Socket 775
  -4 GB DDR2 RAM
  -Microsoft Windows 7 Home Premium 64-Bit
  -Maxtor 6Y080L0 80 GB IDE Hard Drive
  -LG Super Multi IDE DVD Writer Drive GH22NP20 (not recognized by the BIOS, as mentioned above).
  -ATI FireGL Graphics card VGA 128 MB
  -POWER SUPPLY 350W

  Hi Brandon,.

  Certainly, this seems to be a problem with the hardware. Contact the manufacturer of your computer or a local technician for assistance on this issue.

  Feel free to respond if you need help with Windows in the future, we will be happy to help you.

• CD drive is not displayed under 'computer '.

  I put a CD in my CD drive and nothing happened. I use Windows 7. The PC is HP pavilion slimline. I clicked on the computer and the CD drive does not appear. Help!

  All I want to do is instlal a program from a CD.

  Thank you

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• My DVD/CD drive does not work in Windows 8 Professional, and it ISN'T a hardware problem.

  My DVD/CD drive does not work in Windows 8 Professional with or without data or audio in it. However, if I turn off the PC with a bootable CD/DVD in there, the PC recognize the media and initiate the CD when turned on. This confirms that the DVD/CD drive actually works, but for some stupid reason, Microsoft Windows 8 Professional will not recognize the same DVD/CD player it loaded since! Thanks again Microsoft for another product of shit. Now, how are you going to fix this? And how are we supposed to run things such as WordPad or paint, etc. I predict that Windows 8 will fall faster than Windows Me!

  Hello

  To access all applications - just right-click anywhere on the splash screen - the lower right corner
  -All Apps - scroll to the left to learn more. You can pin any application to the start screen - right
  Click on - to start pine.

  It is a real help:

  Windows Store - Top free - Windows 8 Cheat Keys

  While on the screen type start - Help

  Or Win Key Q plus Apps search - help

  Or charms - Search - Apps - Help Menu

  After that the foregoing-> on left click-> Help and Support.

  ==================================

  Solution Windows 8 - left Center - learn more
  http://support.Microsoft.com/GP/Windows-8

  Meet Windows - a good start
  http://Windows.Microsoft.com/en-us/Windows-8/meet

  ====================================================
  ====================================================

  It was an upgrade of Windows 8 or you you destroy the old operating system and
  do a full install? Are there any error messages?
  
  Check the Compatibility Center to see if the drive is compatible:

  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

  Check with the manufacturer of the system support, their documentation online and pilot/firmaware,
  and ask questions in the forums (if any) on known problems. Some CD/DVD players are not
  Windows compatible 8.

  ---------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  -------------------------------------------------------------------------------------

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Suddenly the apps work not (start.. net.rim.device.api.ui.manager .class not found error)

  All of a sudden my apps no longer work

  always "start XXXX error: class 'net.rim.device.api.ui.manager' not found.

  everything compiles fine

  remove all my cod, jar,... directory of Simulator

  clean all projects

  Nothing helps

  from a demo app

  My applications have dependencies to some libraries

  really, you're wondering where to find

  any ideas?

  reason: size of the resource of a library project has been nearly 8 MB

  one of my libraries (where the wallpaper of my browser are stored as png resources) becomes a size of about 7.5 MB

  I know that 8 MB less certain overhead is the maximum allowed size

  (this is the reason why I use some library projects)

  I have learned the hard way that a message like

  NullPointer INTERNAL means "application or a resource too large.

  in this case last month as he tried to PACKAGE an application where the limits of size (app 8MB max size + resource set size 8 MB max) are reached

  but this time there was no error when packing - my library projects and soft with dependencies to these libraries compile well and packing has been without any reported errors

  This time, it occurs during EXECUTION of the application and an error like ' net.rim... class ui. Manager not found "is not very intuitive to think that the size of the resource of one of your library projects is too large

  I don't want to revisit the discussion why these limits exist on modern smartphones (do not have these limits with Android or iPhone), but...

  PLEASE PLEASE RIM

  -Why not offer a message meaningful all-in-package as ' Attention: size of the XXX project resources (or the size of the app) is near the maximum of 8 MB - please restructure your projects instead of "class not found during the race.

• When I try to copy a single file (for example: size of 1 GB) drive hard to any what external memory device via the USB port, the copy process takes several hours to complete

  I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Format the external device to the NTFS format and check if the problem persists.

  See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format

• Drive says CD drive is not a supported format, but it is.

  I have a HP dv7 running Windows 7.  A few months back from the CD/DVD stopped reading any disc I put in.  I uninstalled and reinstalled/updated all the drivers and controllers without result.  When I run the microsoft fixit it tells me that the disc is not in a format supported, which isn't true.  I tried several different CD/DVD drives on the computer and they all have the same problem but work very well on other computers.

  In short, my computer recognizes any what CD/DVD drive I put in there and said that they are working properly and that the real disk is not supported, even if the same disks work in the same conduit by other computers.
  Any ideas?

  Hello

  Thanks for posting the information.
   
  Please follow the steps mentioned in the article mentioned below.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
   
  http://support.Microsoft.com/kb/314060
   
  Note: follow the steps in the manual method.
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  322756)

  ( http://support.Microsoft.com/kb/322756/ ( )

  
  How to back up and restore the registry in Windows

  I hope this helps.

• CD ROM not showing drive is not in my computer.

  My CD Rom drive not displayed in my computer. However, it is displayed in the Device Manager. I can't play any CD at all. The reader has to be able to run to it because it opens and, of course, present in the Device Manager. I already tried to reinstall the driver for him and it did not work. I'd appreciate any help, thank you.

  I opened my computer and a cable is not attached to him. My apologies for the error. Works like a charm now. :)

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. Now what?

  Floppy drive read only not the disks.

  Hello Fishface1977,

  Thank you for your message.  If nothing has changed on your system, recently, to include hardware, software or updates?  Also, have you installed the drivers that came on the CD with your system or you download/install the drivers the most recent of the website of the manufacturer of your computer?  It is recommended that you download/install the drivers provided by your computer manufacturer's website.  Please let us know so that we can better help you get this issue resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• driver does not load on computer

  Scan-Doctor recognizes the printer on the wireless network, but after many attempts, the driver load on computer

  Please ignore my investigation that I have misquoted the kind of material involved