monitor msi tactil

Similar Questions

• Touch screen Acer which can be used by a gloved hand

  I know there's an archived version of this same question, but the models listed in this post are no longer available in the Acer store. So which screen touchscreen Acer monitors optical tactile use of detection?

  Thank you

  Unfortunately, only 2 models I see that use touchscreen optics are the T230, T231. You are right, that these products are no longer on the Acer store. I recommend searching online to see if you can offer someone selling these products.

• do I need intel odd eject software more since I was my x 51 if its listed as odd monitor new of msi

  Hi so I have more that an optical drive that came with the x 51 as I have a new case is necessary for this odd Monitor driver MSI intel odd eject things, as my new case has a diferent optical reader.

  can someone please help me here thanks a lot :), you're the best.

• Building Firefox MSI with certificate authorities roots parameters ntlm and Add-ons disabled

  I have to build a Firefox MSI with CA root installed automatically, some NTLM configured parameters, and modules disabled by default with users unable to make it back on.

  I know that Add-ons can be disabled with Firefox running in safe mode.  I know how to add the Root CAs and I believe I can change the NTLM settings while monitoring with EMCO (an MSI builder) without issue.  Otherwise I know that I can create a config file for the NTLM settings.
  

  However, I am very confused with how I should configure the certification authority root to be a trusted root automatically. I will try to follow up while I add these settings, but I fear that the package that I build is not complete.

  I'm completely stumped on how to disable the modules. If it's a subject: config parameter, is possible to lock on: config?

  Thank you very much for the help guys, I am always impressed at the level of intelligence in the Mozilla forums.

  you might have to look http://stackoverflow.com/questions/1435000/programmatically-install-certificate-into-mozilla

• Monitor only works in safe mode now.

  Hello!

  I got my self in a bit of a mess, trying to change my screen after I broke my tv, I had to dig my old vision pro 700 p. Now I have to change the settings for that monitor and now it says on the monitor "Display Mode not compatale! Now every time you start it toward the top of the screen just black remains with this post about that. Can't see windows, unless you put it in safe mode! I tried restoring the sysem on twice, I uninstalled the graphics driver software, and then reinstall just tried than raid drivers and it says that you can only intall these if you have an account administrator in vista, what I'm doing. against because safe mode? I have a compaq presario sr5129uk with a raid hd 6450. Thanks for any help.

  I suggest to remove the video card temporarily. Connect one screen to video output to uninstall MSI overdrive.

  While you're there, you should try to connect two displays to the output video DVI - I and VGA) with cables and converters without the card installed.

• Fixing additional monitor

  I want to fix my HP 2709 monitor to my HPTouchsmart 600.   The monitor has only vga not cables not a usb key, so how can I do?   Thank you

  Looks like you will need to get a USB-to-Video feature.

  Here is a decent one for about $40 on amazon:

  http://www.Amazon.com/Generic-USB-2-0-multi-display-adapter/DP/B001NG8H9G/ref=sr_1_sc_2?s=electronics & ie = UTF8 & qid = 1334974913 & SR = 1-2 - Spell

  When you plug into a USB port on your Touchsmart computer it will basically turn it into a connection to your second monitor.

  Some people have commented that plug a USB-to-Video device can cause your tactile feature Act up.  If so, disconnect the USB-to-Video device should stop.

  Since you already have a VGA cable, you don't need to buy additional cables, but you will need to use the adapter DVI / VGA provided with this unit I linked to the top above.

  I hope this info helps!

• Acer G246HL monitor (UM. FG6EE. B01) - screen Type

  Just installed acer G246HL monitor and cannot work my way through the display settings, I can get the menu but that's it, how to choose different settings?

  There should be buttons on the left of the switch (if not tactile, possibly sensitive to touch). It is without a doubt between a "right", "left", "menu", "entry", perhaps a few others. Menu course should open the menu (that you've probably discovered), while others (especially the left and right) can be used to navigate in the menu. It may take some experimenting (as all monitors seems slightly different), but it shouldn't be too hard. If all else fails, check the manual you should have received with the monitor - which should list the keys; where they are and what they do. And, just to make sure you know, you can use regular peripheral of entry (mouse, keyboard, etc.) to control the menu on screen.

• Reliablity and performance monitor is empty

  I was just playing on Vista, now that I finally got and decided to launch the performance and reliability monitor to see why my computer was using up to 1.6 GB of RAM at idle. Not that she really bothers me or hurts my performance of the computer (after x 64 windows and 6 GB of RAM), but after opening it, I was a little confused because nothing was actually happening. I went to the monitor tab, you press start, but who have done nothing. I also tried to pass through the computer management program, but the same exact results. The work of monitors of reliability and performance, but the main screen, which shows the performance used by individual programs won't give me empty graphs, of the options and outcomes - although lack of. Any help would be great.

  This is just a screenshot of what happens:
  http://i562.Photobucket.com/albums/SS68/ThuggyWuggy/NewBitmapImage.jpg

  Well, I did everything what should have made the monitor, at least, I don't think that I did... the only thing that I changed the activation cool no silent mode for my CPU on my motherboard options, so I would not use too be able to leave my computer on all night. The monitor now works... If it stops working again, I'll post, but that seems to have been the cause. (?) It seems weird to have solved anything, but w/e... I do not know... I don't understand. I'll leave it is open for a day to make sure that it is the question. If this is the problem my motherboard is a version of Platinum bios msi k9a2 1.4, so others know how to solve this problem.

• Monitor HP updates fail with the error code 80070005

  I get a message that not load my updates of the screen.  This has been a problem going on since

  the purchase of this pc and installation of the monitor.

  In addition, I can't run my Bernina on Vista software.  Do I need to buy special software to do this?

  Hello Sharon sews,

  The error that you are experiencing with your monitor is an update of the HP driver for the monitor. It is not a Microsoft Update.
  See the post on the HP support forum: follow the cutting edge of technology and should help with your problem.
  http://h30434.www3.HP.com/T5/monitors-and-video/update-error-code-80070005/m-p/11754

  Regarding the issue with your Bernina problem, it is probably not compatible with Windows Vista.
  You can try the following:

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  You can also try to do a right-click on the setup.exe or .msi file and choose "run as administrator.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista detects wrong monitor

  I have an Acer X193W lcd monitor, but Vista detects it as E151H.
  I tried to install correct driver but visits won't tell me that the best driver is already installed.
  Tried to remove the driver and restart, but Vista still detects incorrect monitor.

  Vista sp2
  NVIDIA Geforce 8400gs

  Hello SteveW57, welcome.

  Out of curiosity, having the incorrect driver of display problems?
  You can try this to force a different driver:

  1. click on START
  2. right click "Computer" and select "Properties".
  "3 click on Device Manager", top left
  4 expand the category of "monitors".
  5 right-click the monitor shown and select "Update Driver"... »
  6. choose "Browse my computer...". »
  7 choose "Let Me pick from a list...". »
  8. click on 'Next' and then 'Have Disk... '. »
  9. click 'Browse' and navigate to the location of the driver. If the pilot is only an installer .exe or .msi file let me know.

  Confirm all the prompts that come up. Restart the computer after you install it and see if it works.

• Double U2412m installation on an edition of founders of MSI GeForceGTX 1080

  Hello!

  Is it possible to connect two monitors u2412m to the graphics card MSI 1080 FE with two DisplayPort cables. The monitor has a DP, but I don't know how it works. The video card has the following products: x 3 (Version 1.4) of DisplayPort / HDMI (Version 2.0) / DL-DVI-D

  How this configuration? What kind of cables/adapters are to be provided?

  Thank you!

  Hi softerthansteel,

  You can just use normal cables DisplayPort for touch screens, so one cable for each monitor to the graphics card. Another option would be to HDMI/DVI (for one of the cables because the card is 2.0 and the other DisplayPort, but I recommend you stick with the DisplayPort cables). The card will have no problem to drive the two U2412M for etc. Extended desktop.

  I hope this helps.

  Brad

• S2240T monitor with touchscreen and 8.1 Windows

  I bought a monitor S2240T to use as a touch screen with an R2 of Alienware X 51 (Nvidia GeForce GTX 760 Ti 2 GB graphics card,), running Windows 8.1. It works, roughly. I can tap furiously several times before it will respond, and it often just not responding at all. I use a HDMI cable, everything is properly connected, and Device Manager shows the monitor as a tactile device compatible HDMI. It's just that this monitor is not really compatible Windows 8.1? This is not intended as a criticism of Dell or Microsoft, the monitor is actually a large screen, I just want to know if I bought the wrong type of monitor for Windows 8 touchscreen, 1, or it is supposed to work better than this?

  Quick update: I recalibrate the touch controls and adjusted the settings for a shorter, lighter touch. Now, it works much better on the half left of my screen only. The right hand of the screen is totally inadmissible to the touch. Is - this Windows 8.1 compatibility not or it's just a defective screen? It is very strange, because touch now works fine on half of the screen!

  Sounds defective.

  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open the "monitor warranty and replacement instructions.

• Dell S2340l 2 on a graphics card MSI R9 290 Twin Frozr

  Greetings!

  As indicated in the title, I have 2 x Dell S2340l and I am trying to understand the best way to connect them to my GPU MSI R9 290 Twin Frozr. The GPU itself accepts the following: HDMI, DP, 2 x DVI - D.

  First monitor is simple; I just used HDMI to HDMI. Now the 2nd is a little confusing.

  I currently have a spare HDMI cable. What would be the best way to connect my GPU?

  I don't care Audio transmission. As long as I don't have full HD @ 60 Hz, which would be excellent.

  Thanks in advance!

  Computer MSI R9 290 HDMI out HDMI to HDMI Cable-->--> #1 S2340L HDMI in

  Computer MSI R9 290 DP on--> DP to HDMI Cable --> HDMI S2340L #2 in
  Computer MSI R9 290 DP on--> DP to HDMI --> HDMI to HDMI Cable--> HDMI S2340L #2 in

• Desktop HP Pavilion p6580t CTO: How can I configure my desktop PC HP Pavilion p6580t CTO for duel monitors?

  I am trying to understand what graphics card I put in my computer HP so I can run 2 two monitors and I have to cut the design of the motherboard that is installed on the computer. I have a HP w2207h (22 ") w/VGA port monitor that I use. and a ViewSonic VP2130B (21 ") monitor that has 1 VGA DVI port and 1-should I wear as the second monitor. The HP monitor is the oblong shape type and the ViewSonic is more a monitor of type square. I don't think it would be a problem, isn't it? In addition, my power is 300W. I don't want to spend a lot on the graphics card that this computer is about 6 years old; just enough to get a Setup dual monitor works.

  Below you will find the info from my computer.
  HP Pavilion p6580t CTO desktop PC
  Model # WS326AV

  Operating system - Windows 7 Ultimate 64 bit SP1 (office)

  CPU - Intel Core i5 650 @ 3.20 GHz Clarkdale 32nm technology
  Carrots 2
  Son 4
  Name Intel Core i5 650
  Code-named Clarkdale
  Package Socket LGA 1156
  The 32nm technology
  Specification Intel Core i5 CPU 650 @ 3.20 GHz
  RAM - 8.00 GB memory DDR3 twin @ 665 MHz (9-9-9-24)

  Motherboard - MSI 2A9C (CPU 1)
  Manufacturer MSI
  Model 2A9C (CPU 1)
  Version xxx0204GRxxxxxxxx0
  Intel chipset provider
  Model of chipset Host Bridge Havendale/Clarkdale
  Chipset revision 12
  Southbridge Intel supplier
  Southbridge model H57
  Southbridge review 06

  Graphics - HP w2207 (1680x1050@60Hz) 512 MB ATI Radeon HD 5450 (MSI)
  Monitor
  Name HP w2207 on ATI Radeon HD 5450
  Course resolution 1680 x 1050 pixels
  Work the resolution of 1680 x 1050 pixels
  Active, primary, State support of output devices
  Screen width 1680
  Monitor height 1050
  Monitor the BPP 32 bits per pixel
  Monitoring frequency 60 Hz

  ATI Radeon HD 5450
  Manufacturer ATI
  Model Radeon HD 5450
  Cedar GPU
  1002-68F9 device ID
  Voltage v 0.900
  GPU clock MHz 650.0
  Core Voltage 1.000 V
  8.960.11.1000 driver version
  Version of the BIOS 113-AC50800-100 - MI
  Memory Type HyperMemory
  512 MB memory
  Width of the bus 32 x 2 (64-bit)
  Max power draw 20 Watts

  If there are questions please ask.

  Thank you...

  Hello

  The AMD 5450 in PC graphics card will support multiple monitors (VGA, HDMI and DVI).  The 5450 also supports AMD EyeFinity which allows bear monitors of odd size (different resolutions).

  You will get best results by using digital connections to the monitors.  It would be DVI HDMI for w2207 HP and Viewsonic.

  If you have specific questions about AMD EyeFinity, please consult the ATI/AMD forums.

  Good luck and thanks for posting on the HP Forum.

• Loses the signal of monitor

  System:

  CPU: AMD Athlon X 64 Dual Core 2.6 GHz

  Motherboard: ASUSTeK M2N - MX SE Plus

  RAM: 2048 gigabytes

  Graphics card: MSI 7300 initially, then a PNY Geforce GT 520

  Storage: A WD 200 and a WD 500

  DVD: A (unknown model)

  Monitor: LG W2242T

  OS: Windows 7 Home Premium

  Stats:

  04/12/2012, I bought a copy of Windows 8 Pro for my personal system (not above).

  07/12/2012, I bought a 2nd copy of Win 8 Pro for, the above family system.

  12/7, I started to install Windows 8 Pro system above with the MSI 7300. The facility would go to which appeared at the end, but towards the end, he would show graphics on a blue background. Then he would show no signal on the screen, and the lock, I turn off and then restart. Once restarted, I constantly had the installation message failure and loaded windows 7. After several test all resulting in the same situation, I bought the PNY 520 thinking the MSI 7300 GT was the problem. Unfortunately come with the same lock upward and scrambled graphics. I have tried 15 to 20 facilities work my bios, all to nothing does not. Then, in desperation I downloaded the Win 8 Customer Preview and tried and it INSTALLED and RAN PERFECTLY.

  I'm afraid to try the 8 Win pro on my personal system until I get the functioning of the family system and understand what is happening. Any help is greatly appreciated, thanks for posting and email* address email is removed from the privacy *.  I'll give you my cell phone number if you ask in the interest of understanding and solving this frustrating problem.

  Hi glenblaha,

  You can see these links and control which should certainly help u.

  http://www.TechRepublic.com/forum/questions/101-302418/monitor-keeps-losing-signal

  http://www.TomsHardware.com/Forum/115113-13-monitor-losing-signal-playing

  http://www.TechRepublic.com/forum/questions/101-300412/loss-of-signal-to-monitor-but-PC-still-running

  All the best!