Cell ID-based location detection

Similar Questions

• Fire fox will it work with my palm treo pro a cell phone based on windows?

  Fire fox will it work with my palm treo pro a cell phone based on windows?

  Mozilla are developing is no longer a version of Firefox for Windows Mobile devices - http://blog.pavlov.net/2010/03/22/stopping-development-for-windows-mobile

• Turn off the cell table based on the contents of another cell

  Hello

  Using JDeveloper 12.1.2.3 and have a table where I want to disable a cell in the row, based on a value in another cell (in the same line) and vica versa, IE are mutually exclusive.

  The photo below shows the two cells that need to be mutually exclusive. I have implemented this by setting the "Disabled" field to something like that

  "#{row.bindings.LineOfBusiness.inputValue ne ""}"
  

  I also put the autosubmit = true and added a partial trigger for the other column cell.

  Should be simple enough, right.

  The problem is that it doesn't work and all lines is disabled.

  

  Any tips?

  It turns out that I needed to check on

  don't #{row.bindings.LineOfBusiness.inputValue ' 0'}

  for the selectOneChoice, then it worked.

• ADF Table cell color based on the value of this field

  Dear all,
  I want to create a table for our new application that contains a table that is used to represent the data in a table or matrix format.
  and each cell of the table should be filled with a color of three colors, based on the value belongs to who will for example: (1-8-> green, 9-20 - yellow etc.).
  I don't know how to implement this. Help, please...
  
  Rognard

  Please post in the subforum that is appropriate for your question.

  http://forums.Oracle.com/forums/Ann.jspa?annID=599

  This blocking thread

• BlackBerry 8230 cell phone does not detect in laptop

  Original title: transfer pictures from phone mobile blackberry 8230 to laptop

  I want to transfer pictures on my cell blackberry 8230 on my Acer laptop. I have connected 2 devices, but my cell phone is nowhere on my laptop.

  Hello
   
  1. have you installed application mobile blackberry to your laptop?
  2. is this the first time, you connect Blackberry to your laptop?
  3. what version of Windows are you using?
  4. have you checked by plugging the Blackberry on another computer?
   
  I suggest you try the following methods.
   
  Method 1: If you are using Windows 7, you can try this method.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Check the status of the device in devices and printers
  a. click on start
  b. click on devices and printers.

• TCPdump based on detection of interfaces for IDSM2

  When we deploy new IDSM2 blades in various places, we need to ensure that the interfaces of remote sensing have sufficient visibility in social safety nets. To do this, we (security group) depend on the network administrators to configure SPAN, RSPAN, VACL, etc.. Sometimes the initial Setup is done well, but when major changes are made to the switch, the SPAN/VACL config is lost due to human error. Thus, tcpdump is very necessary to ensure that SPAN/RSPAN/VACL etc. as the case may be set up correctly. Another reason I can think of is when the one-way traffic is stride detection IDSM2, not bidirectional interface.

  We can use tcpdump on devices by stopping the CIDS ' stop /etc/init.d/cids ' first. Is there a work around to run tcpdump on the IDSM2? What interface linux eth? int7 and int8 correspond to?

  Let me know, thanks.

  Try to use 'tcpdump - r' where is the name of the output file to falcondump. -r is an option "read from file" tcpdump.

  Falcondump is expected to produce a file "falcondump.pcap" by default; you would feed this file tcpdump with the - r option.

  For a detailed analysis, we use Ethereal on a different workstation.

  SC

• Dynamic cell colors based on values - Classic report

  Hello
  I have a requirement where certain columns in my classic report should change the color according to the percentage.
  I referred to the following code:

  SELECT e.*,   
  CASE     WHEN sal < 1000     THEN 'red'    
               WHEN sal BETWEEN 1000 AND 2000     T
               wHEN 'yellow'    WHEN sal > 2000     THEN 'green'  
  END the_color FROM emp e 

  But my requirement is quite complicated, I already do a lot of calculations on the existing columns:
  ex:

  ROUND(((COUNT(CASE WHEN class ='A' THEN 1 END)/
  nullif((SUM(CASE WHEN class ='B' THEN 1 END)+ SUM(CASE WHEN class ='C' THEN 1 END)),0))*100),1) as Percentage 

  Can someone help me to modify this code for the column, so that cells (not lines) of my changes to report Classic color dynamically, say what percentage of the above code is > = 75 it must be green, less than 50 means red.
  
  Thank you!

  Example query:

  select cust.*
  , case when credit_limit > 5000 then 'red' else 'green' end as bg_color
  from (
  select
   CUSTOMER_ID,
   CUST_FIRST_NAME,
   round(dbms_random.value(1000,9000)) as CREDIT_LIMIT
  from #OWNER#.DEMO_CUSTOMERS
  ) cust
  

  In the definition of the column in CREDIT_LIMIT, set the HTML Expression < div style = "background-color: #BG_COLOR #" > #CREDIT_LIMIT # < / div >

  See the result: http://apex.oracle.com/pls/apex/f?p=41715:3

  You can also create html together in SQL but I would like to split logic (SQL) and the user interface.
  Another option might be to create dynamic Action (after discounting the report area) and to create a combination of astute selector and a piece of JavaScript, but I guess it's easier.

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Apply the table style based on the contents of the cell

  I'm on a Mac, OS 10.8.5 using InDesign 5.

  Does anyone know how to apply a table style based on the content of text found in a cell in javascript?

  I need to find the document and change all the styles table 'LONG orange verbatim' If the text "HS:" appear in the header line.

  I've been playing with scripts found with the following 3 wires, but can get it to apply a table style.

  Thank you!

  Apply Table Cell Style based on text search and How to apply a cell of table based on grep style search? and Re: find PStyle and apply the cell Style in the Table

  Here are the corrected lines:

  var curDoc = app.activeDocument;
  var allTables = curDoc.stories.everyItem().tables.everyItem(); 
  
  app.findTextPreferences = app.changeTextPreferences = null;
  app.findTextPreferences.findWhat = "HS:";
  var allFounds = allTables.findText();
  app.findTextPreferences = app.changeTextPreferences = null;
  
  for ( var i = 0; i < allFounds.length; i++ ) {
      var curFound = allFounds[i];
      if ( curFound.length == 1 ) {
          var curFoundParent = curFound[0].parent;
          if ( curFoundParent.parentRow.rowType == RowTypes.headerRow ) {
              curFoundParent.parent.appliedTableStyle = curDoc.tableStyles.itemByName( "verbatim orange LONG" );
          }
      }
  }
  

• Lost hard drive, how to locate or wipe away

  Hello

  I use the laptop Sony vaio since October 2010. SR No. 275281303003301 and service Tag No. C60629M3

  During the repair from a Local vendor (since it is not under warranty), I lost the hard drive. (The seller did mispaced)

  Please suggest is possible that I can retrieve or locate my hard drive because it has very important data. or in the case the most unfavorable possible can I erase all data from your hard drive to avoid any misuse of data?

  Any help in this matter is appreciated.

  Note that laptop is currently used in INDIA.

  Thanks in advance,

  Yogesh

  Clarification:

  The hard disk has been removed of the laptop and then lost? Or is the laptop lost everything?

  In the first case, if the hard disk has been deleted and lost, nothing you can do directly. A simple analagy for it is to lose a CD (both are devices removable starage). You can spot as if by magic a CD in your home, or if someone else use it. In addition, Remote wipe (or remove) a CD (or HD), you have to unquily identify the object and then have a program that runs not far from the desired action.

  In the second case - that the laptop was lost, then you might be able to track the cell phone based on unique information that it contains. I will not go into this property.

• Problem detection network with Network Magic/Pure platform Service quirks and WUSB54GC

  SYSTEM & HARDWARE INFO:
   
  Wireless adapter: USB54GC v3
  Router: Netgear WNR834B (with latest firmware)
  Router config: Auto Channel, up to 130mbps mode, radio enabled, enabled SSID broadcast
  Router Config2: Frag Ahmed - 2346, beat the CTS/RTS - 234, long preamble, MTU - 1500
  Wireless security: WPA - PSK + WPA2 - PSK
  Internet: ISP Modem, Auto-IP, DNS Auto, no connection cable

  Operating system: Windows XP Pro SP3 (latest updates as of 17/01/2010)
  Drivers: Latest from Linksys site (v4.9.90 setup.exe download)
  Programs of security software: Comodo & Panda Cloud Antivirus Firewall
  Configs of security software: uninstalled, installed or disabled, and installed/enabled

  DETAILS OF THE PROBLEMS:

  No wireless network is detected on the computer with the installed adapter WUSB54GC.  Cell phones, printer (located in the same office) and game console, receive positive signals / have no connectivity problem.  With a new installation of Windows (i.e. the BONES cost installation before using each method) I tried to install the unit using the following methods: 1) using the Setup program on the CD-ROM included, 2) using the last program (drivers) site Web of Linksys, install 3) manually through the device with drivers from the Disk Manager and installing 4) manually through the Device Manager with the newer drivers from the Web site Linksys.  In addition, I tried with the firewall disabled/uninstalled software.

  I had some success using the Linksys Wireless Manager program that is included in the installation program.  However, it is only if I choose the option 'connect to the hidden network' when the Wireless Manager is ran in the last step of the Installer (no network is detected the case).  The quirks are that the network is not hidden, and after Setup is complete, I can see all the wireless LANs with the Linksys Wireless Manager (no need to check the option hidden network).  After a few diagnostic tests, I think that the Network Magic software that is installed in quiet mode with the Linksys software is at the origin of the problem.

  During the detailed above method that allowed me to connect to the network, I used the firewall software to observe that connectivity can be established only if nmsrvc.exe, a component of the network Network Magic/pure software platform that is installed silently, is allowed access to the network.  After this program to access the Linksys Wireless Manager network can detect networks normally and connectivity problems disappeared.  After he logged initially I can even kill the process, its assistance process and the program manager wireless, still maintain connectivity.  I also thought about this magic (AKA pure networks platform service) network installation two other network protocols that when disabled preventing connectivity.  With certainty the adapter only works if I finish the complete installation program by using the hidden network option and continue to use linksys wireless/network magic software later.

  I'm trying to understand why the Network Magic software is necessary to detect and use all networks.  As I said originally, I tried just to install the drivers through the device without success Manager.  The adapter is configured on a machine Pentium 4 of 2001, and this software supports 40 MB of precious CPU cycles and memory.  I want to connect to my wireless network and use the computer without software bloated slow down the computer even more.  My own conclusion, after all these tests are that my router needs the network magic to work properly for some reason, but if that's true, I would at least use Windows connects to the network as Linksys Wireless Manager uses 30MB RAM itself.  Of course, it's more a problem advanced if I appreciate anyone who takes the time to read all this and make their contribution.  Thank you.

  I think that the most appropriate statement would be that the WUSB54GC has some compatibility issues with Windows XP SP3.

  Specifying the age of the available Linksys drivers I did some research and discovered that the WUSB54GCv3 uses a third party (a common practice), the Ralink RT2800UD chipset.  Latest Ralink drivers for this chipset are over a year newer than the official drivers from Linksys.  They require just a few reconfiguration so that they work with Linksys WUSB54GCv3.  With the updated drivers comes better compatibility and performance often.

  Once I installed these drivers updated the device could detect local wireless normally, and I was able to use the Zero Windows wireless utility to connect to my network.  I think that others with similar compatibility problems will have the same result.  For more information and links to these pilots updated already visit reconfigured: http://sites.google.com/site/linksysupdateddrivers/.  There are not official, updated drivers for many other Linksys products here.  Credit for the drivers and the Web site goes to this person: http://sites.google.com/site/linksysupdateddrivers/about.

• Editing a cell with text in

  I drives me crazy.  I want to edit a cell with text in.  If I click on the cell, the entire cell is selected and wiggles autour.  I can't click on new to add an insertion point.  It seems to me to have 2 options: 1) of a new type that will erase the entire cell and add new content or 2) move the cell to another location (it is jiggly)

  What I am doing wrong.  How to change the cell.

  Double-click the cell to enter edit mode

• Read the contents of a cell in an Excel sheet

  Hello

  In an Excel file, I have several sheets in one leaves (for example: Dispersion) I have a cell that is located in column 3 and line 5, this cell contains a value (for example, 500). So since a VI, how can I read the contents of this cell pour out the value 500?

  If I only have a map I can USE the function 'Reading worksheet File.vi' Pour lire into a txt format file, but here I have an Excel file with multiple sheets in there, how can I read a cell in a spreadsheet says? Thank you for your lighting. Good week end to you all.

  Hello, the privilege of this take a look on.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3409

• Calculation of the distance of the location GPS provider

  I'm looking to develop an application of GPS based location by saving a LocationListener with the LocationProvider, I need to be able to calculate the distance between two cooridinates.

  The Coordinates () .distance method doesn't seem to work, also responds to 0.

  I saw and distance example where speed and range were used to calculate, but I was wondering is this reliable?

  An alternative is to calculate the distance between two coordinates using the Haversine formula, the java class Math in Blackberry JDE however does not have the required operation atan2. Anyone know of any alternative?

  Thank you

  Dave

  In my experience, the distance calculation works.  What results are you seeing?  Are you sure these two places are valid?

  I would not use speed and interval unless there is no other choice, or that the interval was small.

  The quesiton on atan was invited to this forum, have a search for her.  Here is an answer:

  BB has no ACON, ATAN, ASIN

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=142&query.ID=2195...

• DVD-ROM void is not detected

  I'm under that Windows 7 Ultimate update 3 months of Windows XP Professional

  in windows xp, I was able to burn a dvd as disc
  but now in win 7 I am able to burn a CD, but when I insert a blank DVD, it is not detected by the computer, but when I insert one dvd the other (non-empty), it is detected and it works very well
  hope that someone help me solve this problem

  Hey Uma,

  This could be due to the fact that the "Shell Hardware Detection" can be disabled. I suggest to activate and check for the issue. Follow these steps:

  (a) affects Windows and R together and type "services.msc" in the Run dialog box.

  (b) locate "Detection hardware core" and right-click on it.

  (c) click on 'Automatic' under Startup type , click Start under the Service status.

  (d) click apply.

  (e) click OK.

  Check the question with a blank DVD and see if she is gettting detected.

  For more information, you can also run the Microsoft Fixit:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Please let us know if the problem still persists. We will be happy to help you further.