Centro memos does not start

I always use a Palm Centro.  I had a memo open and accidentally launched hot Synch when I was not connected to the cable.  I kept trying to cancel to make a phone call emergency and finally removed the battery to reboot the device.

Now every time I try to launch memos the unit stops and restarts.  I can open other memos of a search, but when I try to reopen the memo that opened the unit also turns off and restarts.

All other applications work.

I have synced all records of memo on the desk and none are corrupt.

How can I get the memos works correctly?

Hello and welcome to the HP support community!

If you are sure that the memos on the desk are all readable, force to replace your existing memos on the phone by changing the parameters of conduct for memos to "Desktop replaces the handheld computer."

Do not click on "Set as default" since you want that doesn't happen only once.

WyreNut

Tags: HP Tablets

Similar Questions

  • Palm does not start

    Hey all,.

    I've had my (sprint) Palm for about a year now. Last night I put it to charge and when I woke up in the morning, I found that it does not start. I see that the first 2 screens and then it stops and restarts again. It keeps doing this without pressing me anything. Any suggestions on what I can do? I took it to the sprint store to know what is the problem with him, but they said that they would charge me $50 just to know what is the problem with him.

    You can try a warm reset to break the loop (just like a Hard Reset, but hold TOP management pressed instead of the power switch).

    If the reset hot gets you the Launcher, then you need to remove any recent program which may cause the problem.

    If the above does not work, a Hard Reset is your only alternative.  All your information is secure on your computer and can be returned easily by HotSync.  (You did HotSyncs regularly, no?)

    WyreNut

    Message relates to: Centro (AT & T)

  • Siri does not start under macOS Sierra

    I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

    In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

    Y at - he of the log files that I should be reviewed to determine the cause of this problem?

    Thank you

    Steve

    Same thing here on a MacBook Pro (13 inch, late 2011)

  • Black MacBook does not start

    I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

    Any suggestions?

    It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

    http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

  • iPhone hot 5s fees and does not start

    phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

    Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

    More troubleshooting can be found in this article:

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  • iMac does not start after the last security update

    Hello

    After the last update my iMac (late 2009, El Capitan) does not start.

    The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

    Does anyone have any advice for me?

    THX

    INTELLECTUAL PROPERTY

    a solution that helped me:

    Re: security update causes damaged Apps

  • iMac does not start after 10.11.6

    Since the 10.11.6 patch my IMac does not start with my hub plugged.

    Everyone

    I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

    Try to plug it into a different USB port on your Mac.

  • MacBook Pro does not start

    I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

    Try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    You said "It's like death does not start."

    Does this mean that he shows no signs of life? Indicator light power?

    Hear the carillon?

    Hear the fans?

  • The FireFox 42.0.1 application does not start.

    The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
    I had to use IE 10 to contact Mozilla.
    Year annual should be ashamed of this...
    Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
    In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

    It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

    See:

  • Firefox does not start, the Profile Manager is not available

    Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

    I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
    DoubleD52

  • My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

    Hi Apple/community,

    I need a help.

    What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

    Any help will be greatly appreciated. Thank you!

    Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

    Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

    If it works, try to repair the disk with this command:

    fsck -fy

    (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

  • Firefox does not start - claims that it is already open

    Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

    I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

    There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

    Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

    I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

    I also turned off my computer and uninstalled and reinstalled Firefox several times.

    I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

    My PC runs Windows 10, incidentally.

    Try to delete the parent.lock file in the Firefox profile folder.

    See:

    What security software do you have?

    Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

    If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

    • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
    • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

    Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • FF does not start yesterday; running Linux Mint 14 in VirtualBox; updated to 39.03

    Since yesterday, Firefox does not start when I click the icon. There seems to be some activity, but the window never opens.

    I use the version of Linux Mint 14 in Virtual Box.

    In the terminal, I tried firefox-safe-mode

    I get:
    "Error: platform version ' 39.0.3 ' is not compatible with
    minVersion > = 39.0
    maxVersion < = 39.0

    I would appreciate help with this.

    PS Since I can't start Firefox data below is not the version I have the problem with.

    This is the latest information that I could find on the version of hotfix for your version of Linux:

    I understand that Firefox will not start, please also see these troubleshooting steps:

  • From itunes last update itunes does not start without the permission

    iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions.  I am the administrator. Windows 7 Professional.

    See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.

    TT2

  • every night does not start after update

    Win 7 x 64
    42.0A1 every night
    Does not start in normal or safe mode after update. Tried - safe-mode and shift method.

    Last crash Crash ID ID: bp-2bd17147-3a07-458b-9c89-4a37e2150718 doesn't mean anything to me.

    I can't put up with these accidents more. I worked on it for over 2 hours today.

    Please, someone help quickly.

    Hi rob86, every night is an early pre-release version where instabilities are expected. If you want to have a more stable environment, please use another channel: https://www.mozilla.org/firefox/channel/#firefox

Maybe you are looking for

  • Sony VAIO with Windows 7: Firefox crashes within minutes of departure. Did not initially. Can you help me?

    Portable changed job several months ago.Currently using Sony VAIO with Windows 7 OS.Changed during any of the information; several tabs open as 'home '.No problem for months with firefox running.About 4 to 6 weeks after the opening, the program freez

  • drivers for hpdvd1170

    Hello, I wanted to know if there are drivers for the external dvd HP 1170 player? Thanks and take care, Bryan

  • T430s compatible battery ultrabay FRU 42T 4679 (ASM 43R8890)

    Hi ~ I just bought a T430s. I want a ultrabay battery to prolong the time of outdoor work and I have a battery of 42T 4679 at home. I so want to try this one on my new laptop. I asked an officer of lenovo by online chat to check the compatibility of

  • Issue of application signing

    When I try to sign my application, I get the following: Error: Code signing request failed because [access_internet] entry-Point-System-equity is not allowed. What should I do for access_internet allowed?

  • RV180 DHCP IPv4 client to work on the WAN interface?

    Hello Is it the customer Cisco RV180 router/firewall support DHCP on WAN interface? What is specifically mentioned on the DHCPv6 client, however, it is not mentioned for the client to IPv4. I want to set up with my cable modem in Bridge mode accessin