Certificate chain from... wasn't confidence causing failure of SSL handshake.

Similar Questions

• Certificate of ISE chain is not the confidence of Clients WLAN

  We run ISE 1.1.3 using Entrust cert signed by Entrust sub CA L1C, which is signed by Entrust.net 2048, which is in all the major BONES stores in the approved form (Windows, Android, iOS).

  We have installed a file PEM concatenated with all certificates in the chain, as shown in the records of ISE. The ISE GUI shows all certificates in the chain individually after importation (i.e. the chain works and is good). However, we are not sure if the ISE sends the entire chain to WLAN clients during the EAP authentication or just the ISE cert due to the error message we get on client all types that stipulate that the certifiicate is unreliable.

  So the question is if the ISE really sends the entire chain or just his own cert with the rest of the cert in the string (which would explain why the WLAN clients complain related to approval of certificate.)

  Anyone out there know if the ISE code isn't up to the shipment in the chain of certs in version 1.1.3 yet or if there is an explanation? Screenshot attached of the iPhone to request verification of cert.

  Hello

  I'm having the same problem with ISE 1.1.1 and I have discussed this thing with Cisco (Expert ISE) and he suggested that the best practice is to use the single certifiacte device and then download intermediate root certificate and certificate root in the ISE certificate store. The ISE will send to the full certificate chain - device > mid-range > root. But the problem is with Apple iOS even when the root signature is already approved, it will ALWAYS ask certificate known either accepted. When I use Windows, it works very well what this means that ISE sends the entire string. For Windows, you must explicitly trust CA under the wireless profile properties > Security > Micrsoft PEAP > settings > validate the server certificate, and then select your CA server.

  I always find out why iOS not accepting is not the string and we find some related discussion on the apple support forum. I'll put you on this.

  I hope this helps.

• -> Not found signature of applications for the certificate chain: RDK

  Please guide me through the process of signing.

  So already I had 2 keys and I won't miss to try again to sign the apps. I always get the following message when you try to sign bar files:

  Error: Certificate chain could not be found for: RDK. RDK must refer to a valid key KeyStore entry containing a private key certificates chain and corresponding public key.

  A detailed list of the steps that my work:

  First asked the SJC file here:

  https://www.BlackBerry.com/SignedKeys/

  Got the file and it stored on my computer.

  Followed everything here:

  https://bdsc.webapps.BlackBerry.com/air/documentation/ww_air_publishing/Configure_app_signing_CMD_ms...

  Tried to sign as described here:

  https://bdsc.webapps.BlackBerry.com/air/documentation/ww_air_publishing/Sign_apps_CMD_ms_1970021_11...

  Full list of commands from command line:

  C:\Program Files (x 86) \BlackBerry WebWorks SDK\bbwp\blackberry-tablet-sdk\bin > blackberry - sign - csksetup cskpass - pass1
  CSK created file.
  C:\Program Files (x 86) \BlackBerry WebWorks SDK\bbwp\blackberry-tablet-sdk\bin > blackberry - sign - to register - csjpin pin1 - pass1 C:\Users\Steven\key\client-PBDT-1429701914.csj cskpass
  Info: Are registered with the server.
  C:\Program Files (x 86) \BlackBerry WebWorks SDK\bbwp\blackberry-tablet-sdk\bin > genkeypair-blackberry keytool - keystore C:\Users\Steven\key\key2.p12 - storepass pass1 - dname "cn = Thuis" - alias steven

  P12 file creation.

  Moved and p12 file renamed to C:\Users\Steven\AppData\Local\Research in Motion\author.p12 since that seems to be the default location.

  C:\Program Files (x 86) \BlackBerry WebWorks SDK\bbwp\blackberry-tablet-sdk\bin > blackberry - sign - storepass pass1 'C:\Users\Steven\bar\example.bar '.
  Error: Certificate chain could not be found for: RDK. RDK must refer to a valid key KeyStore entry containing a private key certificates chain and corresponding public key.

  Please let me know what I am doing wrong or what to do. I ruined a whole day trying to get this thing to work...

  The solution described here (http://docs.blackberry.com/id-id/developers/deliverables/30182/App_signing_errors_1526016_11.jsp) isn't really help (because it is not very clear...):

  Certificate not found string for: RDK. RDK must refer to a valid key KeyStore entry containing a private key certificates chain and corresponding public key.

  Possible solution
  Make sure that you have correctly configured your computer for the signature.

  Thank you

  Desperate user

  It seems the instructions you followed is outdated. It has become easier:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_publishing/signing_setup_tablet_apps_1920...

  We hope that the process that you followed has generated these 3 files:

  Author.P12, barsigner.csk, and barsigner.db

  and you should be able to sign your application using this (assuming that it is a PlayBook application):

  bbwp C:\Users\Steven\bar\example.bar -g pass1 -buildId 1 -o C:\Users\Steven\bar\example_signed.bar
  

• Getting error while using the certificate chain

  Hello
  
  I use a SSL security certificate chain and when sending message I get the error message. This error happens when B2B tries to retrieve the portfolio's private key to sign the message. He said "alias found certificate", but he then gives error message creating. Please find below the log for the specific portion
  
  2008.11.24 to 09:19:24:150: Thread-13: B2B - (DEBUGGING) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getPrivateKeyFromWallet entry
  2008.11.24 to 09:19:24:154: Thread-13: B2B - alias of certificate oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getPrivateKeyFromWallet (DEBUG) found: [email protected], CN = RECIPIENT B2BONRAMP, OU = Digital ID class 1 - full Microsoft Service, OR = invalid Persona, OU = www.verisign.com/repository/RPA Incorp. by order No.------, LIAB. LTD (c) 98, OU = VeriSign Trust Network, O is VeriSign\, Inc.
  2008.11.24 to 09:19:24:159: Thread-13: B2B - (DEBUGGING) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage an exception during construction create message
  2008.11.24 to 09:19:24:161: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage exception msg: null
  2008.11.24 to 09:19:24:163: Thread-13: B2B - oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage (DEBUG) exception stack trace: java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyFromWallet(EBMSExchangePlugin.java:5967)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyForSigning(EBMSExchangePlugin.java:5322)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.signAttachment(EBMSExchangePlugin.java:5160)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2130)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1641)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
  at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
  at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
  at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
  
  2008.11.24 to 09:19:24:168: Thread-13: B2B - java.lang.Exception (ERROR): java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2289)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1641)
  at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
  at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
  at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
  at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
  at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
  Caused by: java.lang.NullPointerException
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyFromWallet(EBMSExchangePlugin.java:5967)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.getPrivateKeyForSigning(EBMSExchangePlugin.java:5322)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.signAttachment(EBMSExchangePlugin.java:5160)
  at oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin.createMessage(EBMSExchangePlugin.java:2130)
  ... 6 more
  
  
  Does anyone have an idea what could be the reason for this error?
  
  Help, please.
  
  Thank you and best regards,
  Anuj Dwivedi

  Hello

  You may have the whole chain.

  A note aside on the issue of departure indicated - if you do the same conversion for some reason things don't work well. The work is as follows,

  1. tell certifcate user export to a file, utilisateur.cer
  2. remove the baptistery of the user of the ewallet.p12
  3. import the user certificate in the file that you created in step 1.

  It should work smoothly. HTH.

  Kind regards
  Sinkar
  [Correction to Ramesh Team]

• Errror: The certificate chain was issued by an authority that is not approved. connecting to a wireless access point

  I can't understand the process of certificates, by connecting a pc wireless access point that is authenticated by the radius server, im keep having this error "the certificate chain was issued by an authority that is not approved." do I need to set a certificate on the pc?

  Hello

  1. What is the version of the operating system that you are using?

  2. What is the exact full error message?

  If you use Windows 7 follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/view-or-manage-your-certificates

  http://Windows.Microsoft.com/en-us/Windows7/certificates-frequently-asked-questions

  You can also contact your ISP for more information.

  Hope the above information is helpful.

• RIM: error barsigner: certificate chain could not be found for: autor. Author must refer to one

  AFTER THE EXECUTION OF:

  BlackBerry-sign - keystore XXXX.p12 - storepass xxxx App.bar autor

  GETTING:

  error barsigner: certificate chain could not be found for: autor.  Author must refer to one
  valid key KeyStore containing a private key entry and the corresponding public key
  certificate chain.

  Final slash file must have:

  -RDK. SF
  -RDK. EC
  -MANIFESTO. MF
  -AURTHOR. SF
  -AUTHOR. EC

  My:

  -RDK. SF
  -RDK. EC
  -MANIFESTO. MF

  Any help?

  Author's misspelling - should be author

• Updated blackBerry Smartphones to BBM v7.0.1.23 and receive now "you are trying to open a secure connection, but the server certificate chain is not valid.

  BBM v7.0.1.23

  BlackBerry 8530

  V5.0.0.459 smartphone (Platform 4.2.0.201)

  recently upgraded to BBM V7.0.1.23 and now receive message repeated 'you try to open a secure connection, but the server certificate chain is not valid.

  battery pulled, continues to occur.

  I would appreciate your help to resolve.

  This was bugs me for a few weeks now, after update BBM to try BBM voice

  see article ID KB33968 knowledge base

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do;JSESSIONID=39AB1AF3BC35AC4B221973537775C2C7?...

  . . . I tried to insert a link shortcut to the URL, but it was not allowed.

  Looks like a fudge like BB issue a correction. I have not tried myself but is told by the way, but I'll do it later today.

• Cannot add vCenter, error 'server not verified certificates chain '.

  Hello

  After the upgrade to VCO 5.5.1 I can't add a vCenter which was previously registered reports the following error:

  Error

  Impossible to register or upgrade to vCenter server extension

  com.vmware.vim.vmomi.client.exception.SslException: com.vmware.vim.vmomi.core.exception.CertificateValidationException: not verified server certificate chain

  I re-imported the cert of the Victoria Cross, but still no luck. I also license server failed and had to add manually. There is no restriction of firewall in place, so I don't know what else could happen. Any ideas appreciated. Thank you.

  We've been through this process with all 6 of our vCenters. It turns out that it was the only one with a problem. I suspect it's because the old length of cert has 512 MB, while the others, who were an installation vCenter fresh and not upgrades, created a cert 2K.

  Remove and then reinstall vCenter 5.5 only fixed the problem.

• All light Emily let me (security certificate expired) and an error in what is the ssl solution

  All light Emily let me (security certificate expired) and an error in what is the ssl solution

  Hello

  ·         What is you receive the exact error message?

  ·         When you receive the security error certificate expired?

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• How do to this chain operation looks simple but causing a lot of time to do :)

  Hi all

  I have a very large chain, i.e. the soap xml response send by server that I read once connected to the server using http, now the problem is that I need to create a Document out of it and analyze what is simple but the answer I get server requires many replacements of string as example 1) replacing "<" with "<"  2)="" replacing="" ">"="" with="" "="">" etc before creating a document out of it now there are many such replacements in the sending of the response from server that takes a lot of time. 5 minutes on the emulator. So my question is how do? Is there a native method to replaceAll occurrences of a substring in a string or while I can use or is there another good way? Please let me know thx.

  Thank you

  Sagar

  We took over a project done by someone else, and they were doing exactly what you do.  Here is their source, which I think is more effective that you give it a try if you want.

  But be aware that I have never used or tested this code.

  I guess you pull that string to the center of your SOAP response.  It has been encoded XML.  So you can do what we did in this case and wrap the string as a data element in an XML element and then use the XML parser to get the actual data, which feed us an XML parser again to get the actual data.  XML is already set up to deal with these characters, so it was more effective than the approach to replace.  Actually to be honest, it wasn't the reason we exchanged, that as part of the parser XML meant we were convinced it was done correctly.

   public String replaceAll(String source, String pattern, String replace) {
          if ((source != null) && (pattern.length() > 0)) {
              final int len = pattern.length();
              StringBuffer sb = new StringBuffer();
              int found = -1;
              int start = 0;
  
              while ((found = source.indexOf(pattern, start)) != -1) {
                  sb.append(source.substring(start, found));
                  sb.append(replace);
                  start = found + len;
              }
  
              sb.append(source.substring(start));
              return sb.toString();
          } else
              return "";
      }
  

• Update Windows Installer KB3002885 (and later KB3000061) causes "Failure Configuring Windows Updates, changes of restoration"

  I manually ran Windows Update for about 22 updates including KB3002885 (KB3000061 is not included at this time).  It resulted in "Failure Configuring Windows Updates, changes of recovery".

  Measures taken (without the fix):

  -Reboot

  -Restart in Boot Clean with Services MS no disabled state

  -Updated Troubleshotter

  -System Restore (3 weeks)

  -DISM.exe / Online/Cleanup-image /Restorehealth

  I started installing updates a little at a time and was able to install all the updates about 22 except KB3002885, which always causes the problem 'failure configuration... '. ».

  Updates at this point (November 14, 2014) identified KB3000061.  When update was executed for this update by itself it also caused the problem of the "default configuration... '. ».

  Updates about 22 that have been installed successfully some of them were: KB3000853, KB3004150, KB3003057, KB2978121 and KB2972101.  A more complete list is available if it is useful.

  Windows 8 Pro 64 bit w / Media Center

  Norton Security Suite

  THAT IS TO SAY 10.0.9200.17148

  Worm update: 10.0.22

  Perhaps relevant: I could never update this computer Windows 8.1 in 5 or 6 attempts over a period of 6 months.  Always comes back to the previously installed Windows 8.

  Otherwise, my computer works without other unusual problems.

  Hi Brad,

  Thank you for your response.

  For problems with the upgrade to Windows 8.1, I suggest you refer to the suggestion of Madeni K N replied on 8 January 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-Windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6?page=1&TM=1389602587060

  For more information, you can check the link below.

  Update to Windows 8.1 of Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

  Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

  Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

  Removed and reinstalled HP provided the CD with the same results.

  Test print at the end of installation OK.

  When you try to print from Outlook 2003, Windows 10 returned two error messages

  It said printer error state.

  Other says something about outbind failure.

  Same feeling of failure for Adobe 11.0.12.

  Word and Excel also

  Name of the default printer in Windows print Manger is:

  HP LaserJet MFP M127-M128 PCLmS Pro.

  HP "AUTOFIND PRODCUTS" set ID's of this printer as:

  MFP HP LaserJet Pro M1136

  Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

  Installed an AVAILABLE to update the printer driver.

  Not until the 'WITHDRAWAL of POWER' to restart.

  Everything looks OK now.

• Certificate disappears from the Certification authorities store of trust roots

  Recently, I tried to connect to the network wireless protected at my University.  The process is to install the root certificate and specifying as trusted root certification authority when you configure the wireless authentication settings.  However, the installed certificate does not appear in the list of CAs root of trust, despite my having (supposedly) the certificate successfully installed Racines (TRCA) trust in the Certification authorities store.  I studied the certificates by running certmgr.msc (in particular, I searched this program name, right click and choose "Run as Administrator").  The certificate was not in the TRCA folder.  I've tried several things:

  • Installation of the certificate through the certmgr program: I click the TRCA file and in the window 'Object Type' I double-click the Certificates folder.  In the toolbar choose Action-> all tasks-> Import...  The Certificate Import Wizard as I navigate on the certificate, click the button "Place all certificates in the following store" and navigate to the Certification authorities folder roots of trust.  I cliquerai on finish, and after a few seconds, I get a window saying that the import was successful.  The list of certificates in the TRCA store hot flashes, but the new certificate does not appear.  I think it is automatically removed from the TRCA Bank when the list of certificates is updated (see below).
  • According to the method described above, I am unable to install the certificate in another folder (for example personnel or trusted publishers) except the TRCA folder.  The certificate continues in these files when I refresh or restart the certmgr program.  I am able to copy the certificate, then paste in the TRCA folder, and in this case it actually appears.  However, she disappears from the TRCA folder as soon as I click Refresh or restart the Manager.
  No idea why the certificate is in the process of disappearance?  The TRCA is protected somehow?  Thanks for your help!
  Also, I am running Vista Home Premium Edition with SP1, on a Lenovo laptop.

  I solved the problem by installing this update:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7A0FF471-Ace1-4B82-8CD8-1529B9B03AEF&displaylang=en

• Impossible to fill out the case of the composer from vm - hot add disk failure

  I'm checking a pool of composer, but the extraction fails with the error to the user saying "no server available for this transfer.

  and the connection to the server has the following sequence of warnings in the application log

  EventID 104: No server available transfer to transfer VMS/datacenter/PathtoVM/PoolDesktopVM not name Session: SessionIDString

  EventID 104: Session: SessionIDString reason no. ready transfer servers have access to storage for the VM me: vm-xxxx disk key: 1234

  EventID 104: Session: hot SessionIDString add to the user disk failure: username desktopDn:CN = name of the PoolDesktopVM

  The snapshot that depends on the pool has been published on the forwarding server and comes to 2.9 GB. He could not be connected, but the extraction of the VM based on that snap fails 3.0 GB on the 3.7 GB the customer view says he has to download

  The virtual machine with the snapshot is windows XPSP3 on hardware v7 with vmdk stocked thickness 1.

  The composer generated obtained vm controller buslogic scsi parallel and 3 thin provisioned vmdk added to chain SCSI 1 to account for the persistent drive of the composer and the disposable disc over the virtual machine swap file.

  The composer added 3 discs would explain the remaining space, that the customer has left to check.

  The forwarding server is hardwarev7 using the parallel scsi controller free such as recommended in the view 4.6 installation guide

  Can someone help get beyond the hot disk failure add that seems to be triggered when (I guess as the forwarding server) tried to mount?

  Hello

  It is a requirement. Transfer server THAT VM needs to access the desktop under transfer disks. in other words, host th transfer server running vm must be able to access disks of office under body.

  -noble

• ERROR CODE 606 CAUSING FAILURE OF THE UPDATES OF WINDOWS 'IMPORTANT' 10

  Help, please!  I try to install the last "10 important updates" for Windows, which I was informed automatically.  I tried 4 times in 2 days now and each of them settled due to the 'error Code 606'.  When I click on "help", he pulls up "WindowsUpdate_00000646" "WindowsUpdate_dt000" If that's any help.  Each time, it goes through all the motions, past by restarting as usual, then I get the same reminder of updates, showing "failed" on all of them.  I have not had this problem before.  I don't know what to do to get these updates installed.  I NEED HELP ASAP!  I am a user of impressive program but not at all a geek who can solve the problems that arise, and I have no one to turn to in my personal circle.

  First of all try to install updates when you're disconnected from the internet.

  If no joy, then try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If this still creates one problem another thing you can try is disable the User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  TaurArian [MVP] 2005-2010 - Update Services