certificate of network invites you to join the network

Similar Questions

• Problem of Workstation 12.0.1 where invites you to change the keyboard hook timeout keeps appearing

  , I keep getting invited to change the value of timeout to hook keyboard even if I select the option "don't show this message again".  I have check the do not show again and then click Cancel "leave unchanged" because I don't want to change the level of LowLevelHooksTimeout on my host machine value.

  

  We have gathered an internal bug to follow the question now. Thanks for reporting it!

• Airport Extreme is not able to join the network

  I'm trying to implement a repurposed Airport extreme in Bridge mode. Before, I was always able to use the "join the network" option, but now it only gives me the option to create, expand or inactive. I have a model a1521 (6th generation) that I have as my main router. I also have an express airport of old I have in Bridge mode. I am trying to add the a1143 (3rd generation) to the right network and put it in Bridge mode. Is intended to be used as a wireless print server until I can move my printer and the 6th gen at the same location. This option has been removed? am just missing something?

  

  Apple has removed the option "Register" for the AirPort Extreme (and Time Capsule) when it introduced version 6.x of the AirPort with Lion (10.7.3) utility about 3 years ago.

  If you have... or you can borrow for 15-20 minutes... a former Mac under Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with the utility AirPort for Windows installed on the device... you might be able to manually configure the old A1143 AirPort Extreme to 'join' the network using a version 5.x of AirPort Utility.

• Unable to join the homegroup - when you attempt to join I get this message: cannot create a homegroup on this computer

  I tried all the suggested 'fixes' and am still unable to join. My network has worked well until I installed W7. I can create a homegroup on any computer (I have 4 on the network), but no other computers can join. All I get when you are trying to reach is "impossible to create a homegroup on this computer". It is a problen very common, judging from all the complaints I've seen on the forums. With no exaggeration, there are thousands of people are unable to use this 'easy '... home network Please don't tell me to disable my firewall or computer time sync or one of the other "fixes" that do not help.

  Hello

  Since you're so desperate, you can configure the network to the office network.

  It's a little more work than the collective dwelling, but the results are more flexible.

  -----------------------------------------

  Here you have the whole story because what Win 7 can make wise network.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous methods of theWorking Group sharing which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  Group residential-recommended-links - http://windows.microsoft.com/en-US/windows7/HomeGroup-recommended-links
  Homegroup - frequently asked questions - http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions
  Why can't I create a homegroup? - http://windows.microsoft.com/en-US/windows7/Why-cant-I-create-a-homegroup

  Change-a-group home-password - http://windows.microsoft.com/en-us/windows7/Change-a-homegroup-password
  How to leave a homegroup - http://windows.microsoft.com/en-US/windows7/Leave-a-homegroup
  To turn on/off and set the IPv6 components - http://support.microsoft.com/kb/929852

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Join the public network through the firewall option MCU Conference

  Hello world! Lately, we have a goal to jabber (without vpn) of internet users to join conferences within our network. Our telepresence infrastructure includes VCS, MCUS and endpoints (MX, SX). I discovered that MCU (4505) has a feature called video firewall option (under license). My question is whether it will be sufficient to achieve our goal? I've also heard that VCS expressway is used. What is the difference between these two?

  Firewall MCU option just the second NETWORK card, so you can have one with a public IP address and the second with a private IP address (essentially NAT'ed), and the internal and external clients will be connecting to a virtual meeting room common pre-configured on the MCU.

  The VCS-E (Expressway) works in tandem with your VCS - C to offer secure firewall courses. VCS - C is located on the inside of you firewall and the VCS-E is normally in the demilitarized zone.

  This allows, among other things, external systems to call your systems using H.323 and SIP URI dial, this includes clients of JabberVideo, but not Jabber client CPU.

  For Jabber clients you would deploy normally expressway-e series, see http://www.cisco.com/c/en/us/products/collateral/unified-communications/expressway-series/datasheet-c78-730478.html and http://ciscocollab.wordpress.com/2014/01/29/deploying-collaboration-edge/ - whether it will work with your existing deployment is another story, you might be better off ultimately to something similar to Pexip or Acano - both were developed by former TANDBERG/Codian/Cisco engineers.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• path not found network when joining the domain

  I am using windows server 2008 r2 when I join the area win 7 & 8 pro his show network path was not found, but in xp it works

  Hi Pradeep,

  Thanks for posting your query in Microsoft Community.

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It would be more appropriate to redirect your request to scientists on TechNet Forums that are well equipped with knowledge on this issues.

  You can click on the link below to send your query in technet forum.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  I hope it will give you the help you need. Please do not hesitate to contact Microsoft Community for Windows related queries

• Good afternoon, to join the plan VIP but fails with this message: the invitation code is not valid

  
  
  Good afternoon, to join the plan VIP but fails with this message: the invitation code is not valid

  
  

  Did you check with your plan administrator?

• How do I get this off my departure to the top of the page, what kind of Web do you want? Join the Firefox users around the world, shape its future.

  I googled and upon my departure to the top of page, under Google search space, that question is beneath him.
  What kind of Web you want? Join the Firefox users around the world, shape its future. I don't like it and want to remove it. I did it ask me, but that it contains to appear?
  Thank you

  Hi Demberg, regarding your problem of message on the home page of firefox, I think that not fair to say that you can't remove it. Indeed, it is a message to get involved.

  I hope I've been helpful.

  romsdu81

• BPOS error "could not establish a secure connection t server. Please check if you have installed the required certificates.

  Hello

  We use the Microsoft Online Service in our office.

  The user is confronted with the question by connecting to the Microsoft Online Service, it gives the error could not establish a secure connection t server.  Please check if you have installed the required certificates.

  The one you suggest to fix the problem

  Thank you

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

• HP deskjet 6840 undetected on the wireless network after you have added the new wireless router.

  Belkin Wireless Router unfounded, implemented with WEP security, is dead. Replaced by Belkin new value WPA/WPA2 security is enabled.

  I can connect ok with USB, but I don't know how to re - enable wireless printing.

  Can anyone help?

  Hello

  To connect the printer to the network, you will need to use the PC. tehrefore knowing what OS you use will allow you to direct you better.

  If you are using Windows 7, you need to connect the printer with an Ethernet connection first, then enter the pritner EWS page to configure the wireless connection.

  You can find the exact measurements below:

  http://support.HP.com/us-en/document/c01943577

  For Windows XP or Vista, please follow the steps below to connect the pritner to your wireless network:

  http://support.HP.com/us-en/document/c01835115

  Kind regards

  Shlomi

• Unable to join the network "Home" with the iPhone

  Immediately, my iPhone detects my network "Home", but will not allow me to connect. I have 2 desktop Mac connected if it means something. Support Apple says that the problem is with the router. I was watching the boards until my head swim, and I can't find anyone else with this problem. In other words, unless those with password failure are the same SEO. My subject line in this post is exactly the error message I get. I would like suggestions. Thank you!

  What is the model of the router?

  What kind of security you use on the router...? If you use WEP, use Key1 as network key. Make sure that Mac Filterring disable on the router... Try changing the channel on the router wireless. Also check out this link.

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• You can cancel the sync with another computer on a network?

  My desttop computer was set to automatically sync with a folder and its subfolders on another office in a network.  The purpose of the sync has been backup.  Today, the other computer had a malfunction serious and removed about 20 subfolders. The removal was detected immediately. I checked and found that missing subfolders were on my computer. BUT (I'M A FOOL!) I failed to realize that my computer was still periodically synchronize with the computer 'bad '. Suddenly, after about 10 minutes, subfolders missing from the 'bad' computer have now disappeared from mine as well! Immediately, I went to offline and off the synchronization mode once the horse was out of the barn.

  Is it possible to cancel fatal synchronization that deleted synched subfolders? -Can I somehow recover subfolders that had been so easily available on my computer?

  Yes, you can stop the clock, but no, you cannot cancel it (unless you have a backup of the files stored elsewhere).  You will need to retrieve the files and folders by using shadow copies (if you have one) or with the recovery software from 3rd party (see below for more details).

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.r-TT.com/

  http://www.SnapFiles.com/get/DiskDigger.html

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://www.SnapFiles.com/get/undeleteplus.html

  http://www.Piriform.com/Recuva

  http://www.munsoft.com/EasyDriveDataRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.

• You cannot change the ID network of home-based business

  I'm changing my network ID of a network of home-based business, but after I restarted my computer it comes back constantly as company.

  Hello Hector,

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Your system has already been connected to a network domain?
  3. What is the edition of Windows 7, you use?

  The question arises after the restart, if your system does not have the authorization of the user to change the location of the network. To diagnose and solve the problem, I suggest you try the following steps:

  Method 1:

  You can also perform network troubleshooting that might help us diagnose the problem better.

  Access the link for more information on troubleshooting network below:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  The question may also be due to the user permissions are not available to change the location of the network. You can try the following steps and change the following settings.

  1. Click Start, type gpedit.msc in the search box and press ENTER. This step opens the local Group Policy Editor.
     (Click Yes if you are prompted.)
  2. Expand Computer Configuration, expand Windows settings, Securitysettings, expand network list manager policies, and then double-click network in the right window.
  3. Go to the network location tab, then click on user can change location under the section user permissions.
  4. Click OK , and then close the Group Policy Editor.
  5. Restart the computer.

  Note: The steps above are valid for Windows 7 Professional, full and business editions.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.