CF 2016, Apache 2.4 Win10 CFImage error

Similar Questions

• I can't update my Lightroom 6. Download when opened gives me this error messageLightroom CC/6 Update - April 2016 update is not applicable. Error code: U44M2P28

  I can't update my Lightroom 6. Download when opened gives me this error messageLightroom CC/6 Update - April 2016 update is not applicable. Error code: U44M2P28

  I need to update, I'll get a new camera, which is in the update.

  Is there a solution?

  I just spent hours on the phone with a person who has taken my computer. She got the same error codes I did, but he finally put me to update. It's really too much to have to go through

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• CS4 Design Premium on Win10 Setup error

  Hello world

  I just got a new laptop (Pro Win10, 64-bit) and try to install it on my CS4. Unfortunately, I get this nasty error message, informing me that practically anything by what I'm interested in used to install:

  

  Translation: "Setup error, could not install the following components...". »

  I have seen that others on this forum had the same problem. Apparently, this page has helped some of them:

  • Error 1603: a fatal error occurred during the installation of Adobe Creative Suite

  Unfortunately, this seems to be aimed at users of Win7 and WinXP, not Win10. Has anyone had and solved this problem on a machine Win10?

  Thanks in advance

  HD

  In case someone else has the same problem: we have created another admin on the same machine account and started the installer from there. Now she went without a hitch. Because it installed the software for all users, now my normal account has access as a result of CS as well. Problem solved. :-)

  I have no way to test this, but I suspect that the calibration software (Spyder 4 Pro) could have had something to do with the problem.

• Icloud and itunes on Win10 installation error

  I can't install iCloud or iTunes on my Windows 10. I have read all the troubleshooting and tried all of the suggestions that I have chosen, but have had no success. The error message is:

  There is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  It's just my home/personal computer, so I don't have any support staff or the packaging of the contact seller. I am at a loss of what to do next (and am also new to using an iPhone, so maybe I'm just confused) and I would sincerely appreciate any guidance anyone can give me.

  Thank you!

  Here is a picture of the error message.

• Update failed during the restoration of Win10 for Win7

  Hello

  There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.

  I've never met update of the issues before the restore Win10 to Win7.

  Name of the update problem :

  -Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)

  Type of computer / OS :

  -Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM

  -Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit

  Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :

  -Windows Defender (off)

  -Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)

  -AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)

  Previous programs anti-virus installed / uninstalled :

  -factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.

  -ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.

  These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :

  -Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000

  -msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner

  -windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0

  -NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011

  Latest updates successfully and the repetition does not install of KB3102433 :

  

  Error codes for KB3102433:

  -26/08/2016: 80200001

  -29/08/2016: 13EC

  -03/09/2016: 643

  -03/09/2016: 643

  Measures taken and the results:

  1) has no installation by the restore process: (KB3102433), 80200001 Code

  -revealed by timestamp in the update history

  (2) Windows Update interface: 1 important update available (KB3102433)

  -Click on install updates

  Result (s):

  -Failed / update history does not record the event

  3) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error during installation"

  -Updated story does not connect me

  (4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool

  Result (s):

  -Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.

  Identifier of the package: WindowsUpdateDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: (me, user Admin account)

  Context: restricted

  (5) run the System File Checker tool

  Result (s):

  

  (6) Windows Update interface: 1 important update available; KB3102433

  -Click on install updates

  Result (s):

  -This time the story recorded event update:

  Installation date: 29/08/2016

  Installation status: failed

  Error details: Code 13EC

  (7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)

  Result (s):

  -He scored a few points set except one:

  -"" Problems: Windows Update, error 0 x 80070057 do not set ""

  -This stage caused the update Interface to turn red on the theme and lose all it's information. such as:

  -1 important update available / 8 optional updates available <> before - now -online NO update available

  -Final check of updates: front: 29/07/2016 - now: never

  -Updates have been installed: front: 22/07/2016 - now: never

  -"Install updates" button "Check for updates" has disappeared, replaced by

  8) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error when installing... See log file»

  -Updated history do not log the event

  

  (9) click on ' Check for updates ' hopefully bring "updates available".

  Result (s):

  -He kept checking for about 2 hours without change

  -I didn't know how to cancel the verification process, then...

  (10)... Computer restarts

  Result (s):

  -updates stops

  -Updated Interface:

  -Does not display available updates

  -Final check of updates: never

  -Updates have been installed: never

  * 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''

  (11) select problem update (KB3102433), and then click on install

  Result (s):

  -A failed; Error Code 643

  -Click on 'Try' again: same results

  Any help would be greatly appreciated.

  Thank you

  Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.

  Best regards, VZ :)

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Why my log shows an error MSPublisher when I have zero installed software MS

  In general, I only put my iMac to sleep then when I had to start rather than wake up it I checked the log. I have not found no answer to my question about why he had to be restarted, but all looking at, I discovered this message:

  "

  July 24, 2016, 13:56:26 cloudphotosd [443]: error: error Domain = MSPublisherErrorDomain Code = 1 "the picture was rejected for download." UserInfo = {NSLocalizedDescription = photo was rejected for download.}

  July 24, 2016, 13:56:26 cloudphotosd [443]: MSPublisher - 278833312 derivatives of the applicant for files 1.

  July 24, 2016, 13:56:27 cloudphotosd [443]: MSPublisher - 278833312 1 asset collections submitted for publication.

  July 24, 2016, 13:56:27 cloudphotosd [443]: MSPublisher - 278833312 sending metadata... »

  Why my Mac tries to submit a photo to MSPublisher? I use MS No. software absolutely on the Mac and have never

  Just curious... thanks to anyone with an answer...

  There were some users with more than a year there are questions, a similar topic;

  that they did not use a version update of Mac OS X, if the error can

  have been fixed (at the time, because of the most recent update of their/then OS X.)

  What OS X using your Mac? And this version of build, is up-to-date?

  The error reflects the icloud and not necessary that OS X is

  with the files; the line MSPublisher is not indicative of Mac OS X, trying to

  address certain Microsoft software directly; but in the older version of OS X

  10.10.3 an update had problems, one of the symptoms was this error.

  Last year in another discussion of ASC, contributor Linc Davis helped

  to try a diagnostic test and troubleshooting a similar issue. Perhaps it will be

  See your question and propose means for redress...

  10.10.3 slow and horrible - where similar problem was addressed in CSA.

  If your computer is to say running Yosemite 10.10.3, it should be updated

  in the final stage of the system it contains. Some users to keep an older OS X if

  they do not have an iDevice to manufacturing later, with new requirements of iOS.

  Have you tried to secure boot, then use disk utility to repair permissions. Restart

  normal? Or utility disk in OS X Recovery, to repair the disk and also permissions.

  Then the output D.U. and recovery and boot into Mac OS x.

  Don't see no response, after some research, I thought to give a response;

  & do not mean the steps detailed here can be a cure for a symptom.

  Good luck!

• TC520: HPDM 4.7.3610.23043 - cannot deploy images... error message 1080320

  Hello world

  We have not deployed any image TC520 for a few months.  I tried for a few days now, and we get an error.

  Nothing has changed (as far as I can see) in the past months.

  Deposits are still there and can connect on the TEST page.

  The images are still there... and have not been changed.

  TC520 are the same machines TC520

  The HPDM and the client, the version numbers match...

  I can reboot/update etc customers... just imaging that is a failure

  So, fundamentally, nothing has changed.

  But when I deploy an image, I get

  Refusal to execute the task DeployImage.

  2016-08-15 16:20:44 [error details]: deploy the image by using the master repository repository.
  Failed to deploy T520_Vanilla_2k7.ibr/Repository/Images/T520_Vanilla.
  Cannot run the task DeployImage.
  Error code: 1080320, error Info:...... \Task\wins\ImageTask_XPE.cpp@392: cannot run the script to repack wes.
  .. \.. \Task\wins\ImageTask_XPE.cpp@2416: error running script to repack
  .. \.. \Task\wins\ImageTask_XPE.cpp@2414: run = - 200 process return code. Command = C:\repack\Wes7ImageTool\bin\ImageTool.exe f C:\repack\Wes7ImageTool\Config.ini

  Any ideas?

  TIA

  Craig

  I suggest that you use 4.7 SP2 or later version. From SP2, we use the PE of the DM repository instead of the local device.

  This should be able to resolve the problem that you are experiencing.

• Color LaserJet Pro M252dw: "error memory of supply" for a cartridge after software upgrade. Now unusable printer

  Software update on October 8, 2016 resulted in 'Providing a memory error' for the Cyan cartridge. Co-incidentally, it's the only 3rd - Party cartridge in the machine. All cartridges were working perfectly before the upgrade. The machine is now completely in-can be used as the message seems to inhibit printing.

  The cartridge is more than 80% full and I do not wish to replace in an attempt to achieve a solution in this way.

  I tried:

  * Remove and reinsert the cartridge

  * re-start in as many ways as I can think.

  * check whether the absolute latest version.

  * Search the forums for any solution - without success and similar messages

  I have an urgent need to print and I am very unhappy that I have no way to contact HP directly a defect in software on a product a few months out of warranty. I hope that I will not this escalation outside HP.

  Hello

  Use this tool to downgrade the firmware to an earlier version that doesn't authenticate the security of the cartridge chip, then check for the difference:

  http://ftp.HP.com/pub/softlib/software13/COL66159/LJ-162324-1/M252_Series_FW_Update-20150716.exe

• Update SP2 from 2003 to 2008 Std - update, due to lack of InstallWindows:Error Type = 3211266

  Hello

  Really struggling with an upgrade from 2003 SP2 Std 2008, it's a PC that is inherited. Installation goes completely to 100% then says failed and will return in 2003 again.

  Logfile below. -anyone any ideas please? and thanks for looking.

  2016-04-14 18:43:56, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 18:48:31, [0x08071d] MIG CDownlevelOCStore::GetOCCollection error, failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man. : Class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 18:48:43, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 19:07:49, error [0x06015d] IBS EnumVdsDisksCallback: found the disk with an invalid name. [gle = 0x000036b7]
  2016-04-14 19:08:01, error [0x06015d] IBS EnumVdsDisksCallback: found the disk with an invalid name. [gle = 0x000036b7]
  2016-04-14 19:22:53, error [0 x 080792] MIG COCEventTracing::COCEventTracing call failed StartTrace 87. [gle = 0 x 00000057]
  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:13:49, error [0x0802b6] MIG could not create object: HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:13:49, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\InternetShortcut\shell]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\InternetShortcut\shell\print\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell\print\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:26, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\InternetShortcut\shell\printto\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell\printto\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [] HKLM\SOFTWARE\Classes\InternetShortcut\shellex\ContextMenuHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8}. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shellex\ContextMenuHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8} []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [] HKLM\SOFTWARE\Classes\InternetShortcut\shellex\PropertySheetHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8}. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shellex\PropertySheetHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8} []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:54, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\XML\OLEScript]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\XML\OLEScript []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [comdlg32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [comdlg32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [imagehlp]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [imagehlp]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [lz32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [lz32]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [oleaut32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [oleaut32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecli32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecli32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecnv32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecnv32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olesvr32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olesvr32]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [shell32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [shell32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [url]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [url]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [urlmon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [urlmon]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [version]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [version]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wininet]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wininet]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wldap32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wldap32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64cpu]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64cpu]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64win]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64win]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:22:01, error [0x08030a] MIG MigDoMigration caught exception: class UnBCL::ArgumentOutOfRangeException: startIndex and rank value.
  __thiscall UnBCL::String:String(const_unsigned_short_*,int,int)
  [gle = 0x000003f0]

  ______________________________

  Other end of log file

  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. E:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. F:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. G:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. H:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. I:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, stop Info [0 x 080279] complete MIG of the file system manager in place.
  2016-04-14 20:22:16, mapping of information [0x0803e6] removal of MIG for HKLM
  2016-04-14 20:22:16, info [0x0803e7] MIG successfully unmapped HKLM
  2016-04-14 20:22:16, mapping Info [0x0803e6] removal of MIG for HKU
  2016-04-14 20:22:16, info [0x0803e7] MIG successfully unmapped HKU
  2016-04-14 20:22:16, the analysis service of information [0 x 080487] MIG destroying BONE
  2016-04-14 20:22:16, the analysis of information [0 x 080488] destroyed MIG OS service
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xc08].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x3f0].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xdb4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xe68].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xe5c].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xcdc].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xcd4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xeec].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0xef0] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0 x 348].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xa40].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xbe4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 220] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x90c].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 870] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xdf4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 924] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xbc4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0x1ac] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x92c].
  2016-04-14 20:22:16, COutOfProcPluginFactory::FreeSurrogateHost MIG Info: stopping.
  2016-04-14 20:22:16, MigHost MIG Info: process exit.
  2016-04-14 20:22:16, Info [0x0804ae] MIG CMigWorkingDirHelper: removal of C:\$UPGRADE.~OS\OnlineUpgradeApplyWork working directory
  2016-04-14 20:22:16, method of information leaving MigShutDown
  2016-04-14 20:22:16, info [0x08008d] MIG migrate: Finish (0)
  2016-04-14 20:22:16, WARNING [0x08076e] MIG UpgApply: (C:\$UPGRADE.~OS\OnlineUpgradeStore) restore did not complete successfully
  2016-04-14 20:22:16, info [0x08059e] MIG leaving Callback_ApplyNewSysMachineSpecific (failure)
  2016-04-14 20:22:16, PublishCriticalError MIG Info: Windows Setup has encountered an error and cannot continue.  Your computer will now reboot and your previous version of Windows is restored.
  2016-04-14 20:22:16, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2016-04-14 20:22:16, current user interface pages and destination Info [0x0a013e] are the same. Judgment of navigation.
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070042]: called with the notification of error published by ErrorHandler
  2016-04-14 20:45:12, info [0x0a0023] run UI ProgressInfo\SendDiagnostics task: StartProgress
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info: Phase = 4 start time was 0X30D2073BA, end time was 0X30D208448, total was 0X108E
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070044]: startSetupTimeInSecs = 0X30D2072BA
  2016-04-14 20:45:12, info [0 x 070045] DIAG diagnosis treatment given to the 2016-04-14 20:45:12
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070046]: endSetupTimeInSecs = 0X30D209258
  2016-04-14 20:45:12, DIAG CallBack_DiagnosticDataSend info: setupInstallTime = 0X1F9E
  2016-04-14 20:45:12, DIAG CallBack_DiagnosticDataSend info: the user is NOT ACCREDITED-IN M² and Watson.
  2016-04-14 20:45:12, info [0x0a0024] run UI ProgressInfo\SendDiagnostics task: EndProgress
  2016-04-14 20:45:12, info [0 x 090095] PANTHR called WdsExitImmediate!  The execution stops and the queue will not be saved.
  2016 04-14 20:45:12, info [0x09008c] PANTHR SeqExecute - stop, since WdsExitImmediate() has been called
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: SkuAssembly (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MigTestPlugin (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ErrorHandler (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MountDev (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: internal (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: BootIni (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CopyPrivates (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CreatePageFile (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: completion (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: RestartModule (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ParseCommandLine (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineSettings (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: WpeUntndBtstrp (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ModuleLoader (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Ems (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DiskInformation (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: license (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: LanguagePack (SEQ1)
  2016-04-14 20:45:12, info [0x0605a6] IBS requested UI to hide pages selection of language and regional settings.
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: space (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: locale (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineUI (SEQ1)
  2016-04-14 20:45:12, CallbackWin32UITerminate of the user interface of information: deleted WizardUI
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Cmi (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Sysprep (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ProductKey (SEQ1)
  2016-04-14 20:45:12, IBS Info [0x06010d] Module_Term_Productkey: the valid product key in the table, see the property hide the value.
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: CBS (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DynamicUpdate (SEQ1)
  2016-04-14 20:45:12, info [0x0500bd] of THE Module_Term_DU called
  2016-04-14 20:45:12, info [0 x 050081] of THE WaitAndCleanUp of THE...
  2016-04-14 20:45:12, info [0x0500a1] OF THE fact with THE... DUMgr cleaning
  2016-04-14 20:45:12, info [0 x 050082] with WaitAndCleanUp BECAUSE of THE...
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: LogTime (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Unattend (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: UnattendImgInstall (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CFGOfflineImage (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ExternalDrivers (SEQ1)
  2016-04-14 20:45:12, info [0 x 090062] PANTHR destroying module: module IBS PnP (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: SystemRestore (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ConfigSet (SEQ1)
  2016-04-14 20:45:12, info [0 x 090062] PANTHR destroying module: Source (SEQ1) media module
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Imaging (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MSDCleanup (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CopySetupFiles (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ComputerName (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ScenarioDetect (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: engine (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: compliance (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: diagnosis (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: BootPrep (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DiskConfig (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: TempDrive (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: FixBBPaths (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: FirstBootCleanup (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Rollback (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: UpgDriver (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: PrepareInstallDrive (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineProgress (SEQ1)
  2016-04-14 20:45:12, info [0 x 090081] PANTHR destroying any source not cited modules! (SEQ6)
  2016-04-14 20:45:12, info [0x0601d7] IBS InstallWindows:Error Type = 3211266
  2016-04-14 20:45:15, info [0 x 090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• Windows 7 SP1 Windows Update without stopping and this error in windowsupdate.log "FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability.

  Hello

  Since a few days the process "svchost.exe (netsvcs)' ('wuauserv' service) is non-stop runing on my laptop Windows 7 SP1 Dell. He constantly uses 12% of my CPU and makes noise with the cpu fan.

  I tried to:

  - Reset the Windows Update components (it resets the history, but my problem is still there)

  - use the tool File Checker system to repair missing or corrupted system files (no error found)

  - perform a boot in Windows (no change of behavior)

  - Difficulty of Windows Update errors by using the DISM tool / system update readiness (CheckSUR.log is clean: "seconds executed: 287.") No error detected')

  In the CBS.log newspaper, I see these two errors that is repeated from time to time among other lines of INFORMATION:

  2016-07-16 18:03:53, error CBS failed to check if the package is partially installed package: Windows7SP1-KB976933 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514 [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  2016-07-16 18:03:53, error CBS failed to call external assess the applicability on the package: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514, updated: 976933-0_neutral_PACKAGE [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]

  In windowsupdate.log, I found these errors:

  2016-07-16 18:03:43:284 1192 Manager 81C FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability
  2016-07-16 18:03:53:845 1192 Manager 81C FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  Please help me to solve this situation.

  Thank you!

  Bogdan

  Try the following: Stop wuauserv. Install KB3161608.

  http://support.Microsoft.com/kb/3161608

  Best regards, VZ

• Windows Update, error 0 x 80070057

  Separated from this thread.

  I uninstalled Norton and after the fix he said it again: 0 x (2016-04-27-T-07_24_44A) 80070057, error Windows Update

  How can you uninstall the problem as a knockout if they do not know it is the KB # s on as 200 and some?

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because corrupt Windows Update files or parameters.

  Apart from the suggestions made by Gerry C J Cornell and ThrashZone, please refer to the suggestions of T. Kujala and marked as answer by Cloud_TS, Moderator February 13, 2014.
  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/53a1f2ab-037b-438e-A690-00a0e745730d/Windows-7-update-error-0x80070057?Forum=w7itprogeneral

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error parsing of Web.Xml

  Hey guys,.

  I am looking for the push server works without much luck so far.

  I'm running a debian with Tomcat 5.5 installed machine. I am looking for the example of web application to deploy application, however the logs show problems!

  I disabled the security on the Tomcat server, but I got this error message:

  Main Org.apache.catalina.startup.ContextConfig of ERROR - error analysis in the default Web.XML

  This is the first time that I have set up an instance of Tomcat so my apologies in advance if this is a trivial solution. I've attached the output of Tomcat and my file web.xml below newspapers.

  Could someone point out what may be wrong that prevents the application of deployment?

  Thanks in advance!

  Tomcat logs

  Web.Xml

  Abandoned with Tomcat and use PHP. This works.