Cf11 and CF8 on the same server.

Similar Questions

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• SRM and VCenter on the same server?

  I was just by reading the documentation and I saw that I need to have vCenter in both places in my SRM deployment. Now I'm on a server. SRM and vCenter co-exist on the same server? Is it still a good idea. I don't have a problem with the purchase of another server if I need to.

  I have a follow-up question on the vCenter licenses. Do I need to purchase a second license for the recovering site vCenter?

  -Patrick

  SRM and VCenter can coexist on the same server.  You will see a performance impact when you test your disaster recovery plan.  I think that a lot of achievements have vCenter and SRM on the same server.  If you do not want to take the risk of a performance hit on your vCenter server you might move RS for its own box, but I advise to use a virtual machine instead of another physical server.

  I think that you need a license of vCenter to each site.  If your recovery site hosts only the DR then you can use your existing licenses for ESX.  If your DR will site also its own VM produciton is then you will need full license.

• PHP and asp on the same server?

  Just a quicky?

  Can I run both php and asp on the same server?

  Someone has a website produced using asp (don't know about this language) but I would like to use the server it's on and to repeat some of the things using php, retaining only a few pages that use asp, possible or not?

  See you soon

  Operating system

  Hello

  Yes, you can do this (but not on the same page). I recommend you to check with your provider server first however.

  PZ

• Mix of Java and C on the same server of 12.5 Tuxedo?

  I run an application big Tuxedo who perform a mix of Cobol and C calling each other in the same service.

  Is it possible that I have will convert the Cobol in Java code, so I'll have a mix of C and Java on the same single server?

  Or does the Java Tuxedo should only include Java in a single server

  Hello

  Within the server Java Tuxedo (TMJAVASVR) that the Java code is supported.  If a single server can support native languages as C and COBOL or Java, but not the two together in a single server.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

  PS there is no 12.5 Tuxedo don't release 12.1.1, alone and 12.1.3.

• Install FSCM and HRMS on the same server and tools

  Hello

  on a windows Server 2008, I have already installed FSCM92 tools 8.53.0.4.

  Can I also install HRMS92 using the same tools?

  Thank you.

  Yes, you can.

  How classes are installed? Prices FSCM PTools already separated?

  In appl 9.2 / tools 8.53, nothing is made more simple, you have a variable PS_HOME and PS_APP_HOME to separate one from the other.

  You can also separate FSCM HR of the configuration file, then set the PS_CFG_HOME variable as well.

  Nicolas.

• Is it possible to install 10gXE and 11g on the same server?

  On my PC (WIndows XP), I've got Oracle 10gR2XE. I can also install a free version of Oracle 11 GR 2 defining an Oracle home different order to is not in conflict with my real Oracle 10gR2XE?

  Thanks in advance!

  Hi Mark,

  Yes, you can install several houses Oracle of different version on the same host, but on a separate oracle home directory.

  Thank you

  Chandra

• VCB on the same server as vCenter?

  Hi, I would like to know if it is possible to host vCenter and VCB on the same server.  and is it recommended?    Server will have 2 processors quda and 16 GB of ram.

  With the latest version of infrastructure 3.5 is now possible to have on the same machine both VCB and VC.

  In any case, you might have to VCB proxy + backup on the computer program physics and VC on a VM.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Oracle 9i and 10g on the same machine?

  Hello!
  
  I tried to install oracle 9i (* 9.2.0.1 *) and 10g (* 10.2.0.4 *) on the same server (windows 2008 sp2). First, I installed 9i and 10g (two editions of the company). then I tried to create a Database 9i with database configuration assistant. After you configure the database settings and began creating, the installer crashed (JRE. EXE, module symcjit.dll failure).
  
  someone has an idea of what the problem might be or a tutorial how to install 9i and 10g on the same server? Thanks in advance!
  
  Best regards
  Christian

  The problem is that 9.2.0.1 is not yet certified for Windows 2008 and was backed off long ago.
  This means regarding this version, you are on your own.
  Oracle 10.2.0.4 also is no longer in first aid, then Oracle will not address all the new problems.
  You can switch to 11 GR 2 or to demote the server to Windows XP. Windows XP is however out of support too.

  -----------
  Sybrand Bakker
  Senior Oracle DBA

• CF8 and CF7 at the same time?

  Hello
  
  I'm running CF7 and I want to test and usually * CF8 before moving all of our code itself. It would be really useful to have installed and running on my local machine for this.
  
  Can I install CF8 and CF7 is still installed? And I'll be able to easily switch between the two so I can see the code that runs in both cases? I just want to use the web server integrated on my local machine, nothing complicated.
  
  I went through the other threads on installing CF8 after CF7, but none seem to answer to have installed and running at the same time. I could run on separate machines, but I would have preferred if possible.
  
  Thank you!

  Yes you can easily have both. They just cannot use the same
  Web server on the same port at the same time. Would be confusing.

  If you do not know how to connect CF to different web servers and | or
  the ports there is some learning to do.

  A common configuration is to have a version running on the integrated CF
  Web server on port 8300 and the other version running on a free IIS or
  Apache web server running on port 80.

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• FMS 3.5 R2 2012 and with Wowza Server on the same server

  Hello

  Is it possible to have my old FMS 3.5 on the same server, as I installed 3.6 Wowza?

  The server is windows Server R2 2012.

  I installed the FMS, but it does not start after installation and bat files cannot start/stop service either. It makes not a difference if I go to Services to start manually, the sample files still does not work.

  Any suggestions?

  Thanks in advance

  HC

  Hi Hans Christian RVN,

  FMS 3.5 is not supported on Win 2012 R2. You can give it a spin on the platforms supported listed in https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.

  ~ Ashish

• Is it possible to run vCenter Server and AUVS in the same database?

  Hello. My client has vCenter Server and VUM installed and running in the same database. Yes, the same database (not only same server database) and the same ODBC (ODBC VUM is 32-bit only).

  My question is whether it is supported or not and I would like a source VMware information, not only "it works fine for me".

  I can't find any definitive info on this VMware. Only something to wave in the installation and upgrade guides about or not to run in the same database ' ' (I guess they mean 'server') and it seems that the recommendation is to separate them for the 'large environments,' whatever that means.

  The environment vSphere 4.1 is currently, and there are about 20 guests and 150 virtual machines.

  If it is not supported, I guess the best way to go is to reinstall both from scratch?

  Thanks in advance!

  / Anders

  Yes, it is a supported configuration.  Since VUM and vCenter using different tables, you can share the same DB

  The database of the update manager that you use can be identical to the vCenter Server database. You can also use a
  separate database, or you can use existing database clusters. For best results in a large scale environment, you
  must use a dedicated Update Manager database that is located on one computer other than the
  the vCenter Server system database.

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-Update-Manager-50-install-Administration-Guide.PDF