Install FSCM and HRMS on the same server and tools

Similar Questions

• PowerCLI and vCLI - install both on the same server

  Hello

  Probably a stupid question, but I vCLI installed on the server vCenter Server (necessary for a health script that is running)

  Can I install powercli on the same server and use powergui etc. ?

  See you soon

  When your environment is locked, you of course have to execute scripts on the vCenter.

  It's a trade-off between security, ease of use and potential risks.

  But each site must make their own environment analysis

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• FMS 3.5 R2 2012 and with Wowza Server on the same server

  Hello

  Is it possible to have my old FMS 3.5 on the same server, as I installed 3.6 Wowza?

  The server is windows Server R2 2012.

  I installed the FMS, but it does not start after installation and bat files cannot start/stop service either. It makes not a difference if I go to Services to start manually, the sample files still does not work.

  Any suggestions?

  Thanks in advance

  HC

  Hi Hans Christian RVN,

  FMS 3.5 is not supported on Win 2012 R2. You can give it a spin on the platforms supported listed in https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.

  ~ Ashish

• Cf11 and CF8 on the same server.

  Hello

  I need to install cf11 on the same windows Server 2008 as an existing installation of cf8.

  I know that it would be preferable to have 2 servers, but in this case it is not an option open to us, so I need specific help with the 2 installs.

  The current CF8 using IIS7.

  I did a bit of the spade work, and I think that the best way to do it cleanly would install a 2nd web server, such as apache on windows, and then configure it with CF11.

  I had hoped that I could actually install CF11 and simply configure iis specific sites with it, hoping it would leave intact the cf8 configured sites.

  Any help would be appreciated.

  If you have 2 webistes, one that you want to run with ColdFusion 8 and others you want to run with ColdFusion 11 on the same server then yes it is possible. However, two versions of ColdFusion do server same site on the same server.

  Launch the Web of CF8 Server Configuration tool and if CF 8 is configured with IIS all websites, then remove the connector for the set and add the site Web/sites one by one and you want to run with ColdFusion 8.

  

  Now, go ahead and install ColdFusion 11 and in the window 'Set up the Web server', choose the site you want to run with CF 11

  

  

  NOTE : two more important points to remember:

  1. do not remove the CF 8 connector if it is a production server

  2. do not choose all with CF 8 / CF 11 under IIS Web site, because if you choose ALL then all sites under IIS will be configured with this version of CF.

  HTH

  Thank you

  VJ

• Install ColdFusion 11 on the same server as the old versions

  I know that its possible to install multiple versions of CF on the same server.

  However, it is possible to have more than one version uses IIS instead of the built-in web CF Server?  If so, how do I configure this?

  Thanks in advance!

  You have three sites in IIS viz, Site1, Site2, and training3. Try the following as an example: -.

  1. Navigate to \ColdFusion11\cfusion\runtime\bin\ and run wsconfig.exe. In the list of IIS Web sites, select Site1 . Click OK
  2. Similarly, you can browse to\ColdFusion8\runtime\bin\ and launching wsconfig.exe. In the list of IIS Web sites, select Site2 . Click OK
  3. Navigate to \ColdFusion11\cfusion\runtime\bin\ and run wsconfig.exe. In the list of IIS Web sites, select training3 . Click OK

  So now you have Site1 and training3 configured with ColdFusion 11 and Site2 configured with ColdFusion 8.

  Hope this helps

  Kind regards

  Anit Kumar

• 11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  You will always use the 9.3.1 existing environment alongside 11.1.2.1? If Yes, according to 11.1.2.1 documentation, if you want to keep your previous version environment, you must install a
  new machine and you need to replicate data. Previous installation may not work if it is installed on the same computer.

  You install and configure the software version 11.1.2.1 in a new location and move applications and data to the new environment of deployment.

  (1) install the EPM system on a new machine or machines. You can reuse the data and the existing database, or replicate the database and data to a new machine.
  If you migrate to a new machine, you must upgrade to a platform of the same type.

  For example, if the previous version was on a Windows machine, you must upgrade to a Windows machine. If the previous version was on a Linux machine, you must upgrade one
  Linux machine.

  (2) install the EPM system on the machine or machines (Oracle recommends that you install in a new installation location). You can reuse the data and the existing database, or replicate the database and data to a new machine.

  What is written on page 174 of the EPM 11.1.2.1 Setup Guide (http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf)

  I hope this helps.

• Installation of TEST and Dev or screw in the same server

  Hello
  
  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  
  anyone tried similar installation?
  
  Thank you

  Hi user;

  I have a test instance that is running in sun solaris 9. Since I have enough disk space I intend to install the screws or dev env in the same server with different ports.
  anyone tried similar installation?

  You can do this, I have already R11 and R12 and R12.1.1 on the same server. The main problem here is your server can handle all your instance on this subject, you may have a performance problem but thatsall.

  Either way, I suggest take oraInst.loc, oraInventory oratab file under/etc and and also create new user (applmgr-oramgr) of your new system

  Respect of
  HELIOS

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server

• OK to install forms independent 10.2.1 on the same server as the database 10 g 2?

  Is it OK to install forms independent 10.2.1 on the same server as the database 10 g 2?
  
  According to the install for forms requirements check, I have until my kernel parameters of my original config that follows that install the values required for the database. Will I need to worry about these types of changes to the server on how it effects my current database?
  
  Thank you.

  Of course, there is no technical problem other than memory, drives, etc. constraints.

  We use these Frankenstein servers with a mix of Developer Suite and Oracle database of different development versions. Not the best situation, of course. Just be careful of path and ORACLE_HOME settings when doing things like patching with OPATCH since there is more than one instance in which these commands may apply.

  Published by: user577087 on August 28, 2008 01:24

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums