Cf11 crashes (application pool suffered a fatal miscommunication with the to Windows Process Activation Service)
I have a cluster of 2 servers web IIS on Windows Server 2008 R2. They were executed on CF10 for over a year (if there are not two) without any problem. I've upgraded a server to CF11 and now this server crashes then CF10 servers still works fine.
I see 4 instances of this error in the Windows event log:
«A process serving application pool ' *' suffered fatal miscommunication with the to Windows Process Activation Service.» The process id was '4652'. The data field contains the error number. »
Then finally:
"Application pool ' *' is automatically disabled due to a series of failures in the process serving the application pool."
Looking at the application pool in IIS administration, he is arrested. Reboot will solve, but it will eventually crash.
What could be the problem?
-Phil
I didn't turn off logging, but in fact, he stopped recording since about 8:30 am PST, which is strange.
I don't have the exact errors mentioned in the original post (again) but I am faced with the question that some applications take very long. I Failed Request Tracing active and show applications for simple static files such as .css taking 10 + seconds.
-Phil
Tags: ColdFusion
Similar Questions
-
The application is not able to cope with the acquisition of equipment.
I use NI USB 6000 with labview. I'm continuing the analog data acquisition, but then, after running for a while, I get an error
"The application is not able to cope with the acquisition of equipment.
Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem. "Please find the attached vi.
-
Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
I can't even go in safe mode, the same error messages appears.Hi James,
You could try the Startup Repair to see if it solves the problem:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have an annual account CC allowing access following applications - all right until AI launches. The CC window asking me to renew my subscription - subscription I have. PS and to launch etc. - all, but have. Clues? Thank you.
Hello
Please follow the steps here: https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-help.html
https://helpx.Adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Let us know if this helps!
-
Hello
You can directly download the CC applications and authenticate with my adobe cloud identification information without using the desktop application? whenever I have try with the desktop app it says impossible to arrive on the same adobe servers when I'm connected to the Internet and I don't have any active anti-virus software?
Thank you
No application of cc, no clouds. It's the simple truth here. Programs cannot operate without him, since he controls the installation and licensing. the rest, we do not know, since you have not provided any useful technical information. Start by reading this (yet?):
What also good technical details are necessary.
Mylenium
-
I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.
I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.What about OttoWindows vista Home basicHello
Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.
Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/=========
STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Solve the problemRun the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="" this="">-->
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows XP Home edition has crashed - how to return WXP and use with the product key?
Hello. I bought an Equium L20 last year and after 1 year my windows crashed due to a virus. I want to know how to get a real windows xp OS because the product under my laptop key is always saved for me and is a legitimate product but I can't get windows because it was obviously preinstalled and no CD was given to me with the package.
How can I get back Windows to use with my product key on my WIN sticker below my laptop.
Hello
First of all, it is very strange that recovery CD is not delivered with your laptop. It's hard to believe, but anything is possible. As you know after buying a new product, it is very important to check all orders sent with it and if something is missing, you must call the local as soon as possible and not to wait a year.
Sorry but this key code belongs to original recovery image and you can't use it with every installation of Windows XP Home edition CD. In your case, there are two options:
-You can buy the CD of facilities Microsoft original WXP (with the key correctly code) or
-Contact the partner of service allowed in your country and order the new CD from recovery for your laptop model.All that s!
Bye and good luck!
-
We are an OEM that systems of electronic Assembly is based, in our machine is a PC running Windows XP Professional that provides the interface for the operator. Some of our systems have begun to crash intermittently when stopping. Up to now we have seen it on three machines. There has been no change to hardware or drivers that we put on these machines.
The PC is supposed to stop at the point were he said "It is now turn off your computer", but it hangs when the only thing on the screen is the default windows background and the mouse pointer. The mouse moves, but that's all. He is unresponsive to ctrl-alt-delete, or any other entry.
This was reported 5 times, and in any case there's nothing in any log file which would tend to indicate where the problem is maybe.
I guess we have a bad driver or device, but the problem only happens once all stops of 5-10, and only after the machine is turned on for a while.
I just turned on the detailed status messages, but they did not stop the machine since.
What I asked is: is it possible to get windows to connect to all events stop? I really want to know what he was doing when he stopped. Can someone else think something I can look at, or a better way to debug this?
Re: a suggestion on this new monitor to 'prove' is the source of the problem
Disconnect it, connect a type non-ecran touch "ordinary".
stop/restart in safe MODE, make sure that the old monitor is not appear in the Device Manager [what we used to call a ghost]
If it IS, delete it & uninstall the sw provided with touch screen
Reboot in normal mode
Try a stop
If you get the old orange it'S now SAFE, tell the seller about IT. -
Some time ago I bought a computer with Windows XP pre-installed. I have not received a CD with it. At one point, during an update Windows online, I learned that the copy of Windows was not authentic, and the place I bought it from was out of business. I then bought Windows XP Pro Microsoft online and went through the update of product with the Windows product key update tool and ran OK from there.
Well, my HDD recently crashed, and I started to install the Windows XP Pro purchased CD on a new hard drive. The installation was asked to enter the 25-digit product key, I found that the unique product key sent with the CD has been a key 20 digits in this format; Product key: SKU:B7P - 00005 KEY01:xxxxx - xxxxx-xxxxx-xxxxx-CD2. (The x are just for the format).What do need me do to be able to install my real purchased copy of Windows XP Pro?
The numbers you enter are not the product key. Contact Ms. online where you bought the CD or try some of the links below:
The Microsoft Activation Hotline - (888) 571-2048
(800) 248-0655 Microsoft Licensing Fulfillment Center toll-free number from Monday to Friday from 06:00 to 15:00 Pacific time.
Microsoft contact page - http://support.microsoft.com/default.aspx?pr=csscontactfindMS - MVP - Elephant Boy computers - don't panic!
-
Hi all. I have a question?
I have an application and a library. Inside of the app have a lot of calls of this library (easy to say my app that is dependent on the library).
I tried the following scenario: in the main application I added logic to download the library programmatically. But something I missunderstood around that. So, I'm first to download my application that depends on the library then I thought to check in the constructor, if the library exists then activate the app if not then download the lib and restarts the device.
My problem now is if I call a list of class of the library, then the app not working and would be lifted except that «the application contains errors of audit»
So, how can I avoid this? or even
How download this lib from the app and have other methods inside this app called library which is not yet downloaded?
Thank you in advance. A sample will be apreciated.
No, which would require a second application, such as an installer
-
I have a dell vostro 1500 laptop, the hard drive crashed with vista home premium OS, I bought a new rank up and used a disc that came with a desktop vostro albums I bought, but this office came with Windows XP on it more with a WINDOWS 7 operating system... I used this drive to reformat the computer laptop vostro 1500 and now he tells me is not genuein, although I've never opened ti day untilt he I reformat the laptop.
I did something illegal... Please exlain if did it.
you use a key OEM SLP to win 7, which requires a bios compatible win 7 for activation of the auto. 20/06/2008 bios date is well before win 7 is out.
you will need to buy a genuine windows or return to windows, your computer comes with that.OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)
-
programmatically launch a file with the default windows application
I thought it would be a trivial task, but I can't seem to be able to find something about it. I would like to be able to open any file in the native application - as if the user has double-clicked on it. Any suggestions?
Joined a VI I use that does what you want. If the given path is a folder, then it opens a file Explorer window in this folder. If the path is a file, then it opens the file, as if the user double clicked on it. She uses the mentioned command-line function previously.
-
CC of Photoshop crashing with the new Windows 10
I just installed Windows 10 on my pc, everything seemed fine until I tried to print a document from Photoshop CC, window pops up saying photoshop had to close, no code error or a message. I used Windows 7 before and never had this problem. I am using and old Dell all-in-printer. Tried many times, restarted, still nothing, just crashes every time.
It is the driver, you need to install, which is assuming you on Windows 64 bit OS
I had problem with getting the correct driver installed on my laptop, it took me a while to get the right AMD driver installed, what I had to do was completely uninstall the driver control panel AMD and to remove all references to this driver, then I had to go into the Device Manager and display adapters and uninstall the Windows driver it should on a pilot basis the pilot , then I was able to install the software AMD, once the software is installed you need to go into Device Manager and display adapters select once again, put to update driver and point it to C:\AMD, and it should install the driver from there.
Have to admit Windows 10 is a pain with drivers AMD, Nvidia on my PC however did not have any problems.
-
When I try to change the background, display shows theme instead, properties and when I leave my computer on at a certain time, it freezes. What can I do to fix this? How can I use windows CD to repair, when I put the CD and you press the 'r' key, nothing happens, please help?
The lack of tabs in display properties usually indicates a malware infection. First run the scans and do not skip the preparatory work. If the machine stands (not frozen) in Safe Mode (where you'll be scanning), it is also a good indication of infection. Regarding the CD does not start, you probably don't have the computer configured to boot from the optical drive. But no matter, because enter the Recovery Console (which is what happens when you press 'R' from the XP installation disk) won't be useful in your situation anyway.
Go through these stages of systematically General malware removal:
http://www.elephantboycomputers.com/page2.html#Removing_MalwareInclude analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.
http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
http://tinyurl.com/yoeru3 - download link and further instructionsWhen it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS
If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!
-
Application pools and CF9 64-bit and Windows 2008 R2 64-bit
Hi all.
Since about 3 months ago, I got CF9 64-bit running successfully on a Windows 2008 R2 64-bit, and 64-bit PHP server.
It was a few days get it all working happily together, but it's an entirely different discussion, I'm happy to help if someone at - it need help.
My question is for someone with some experience and understanding of the relationship between IIS 7, Cold Fusion and Application Pools.
We have 8 GB of RAM on a 3.2 GHz dual processor box. And on this particular server, we have about 350 sites of cold fusion. All sites of very low traffic, I should add. Like maybe on average 1000 page clicks each day. In any case these sites ran flawlessly on 2 GB of RAM box with two 1 GHz processors. And honestly, it ran more surely than it does now.
What role the Application Pools in an environment dedicated to Cold Fusion?
Because only one instance of JRun is already launched, SEE crashes when requests overwhelms the box and it blocks. So, kind of defeated the purpose of the independent application in my opinion Pools.
During my installation and transfer of these sites, I gave them each their own independent Application Pool, which are now individual instances of IIS worker process, each using about 10 MB of RAM. Thus, for example, if the interaction that happens with 200 websites that they eat up to 2 GB of RAM, which, although not large, is very well now. The problem is that I intend to leave this machine reach 500 sites before adding another box, but I worry about the performance.
FUNDAMENTAL QUESTIONS:
Should cold fusion Pools of independent applications for each web site or all websites can be used under DefaultAppPool?
And what are the advantages and disadvantages of the two options?
Is there a setting I should change who will say active stop w3wp.exe instances if no activity takes place for a certain period of time to release the memory.
Thanks for any input.
Rush, the bottom line questions:
Should cold fusion Pools of independent for each web site applications or can
all of these Web sites running under DefaultAppPool?
No, it's not 'need '. They can all run in a pool. It is probably best to split them somehow, so that is something is not bad in a single application pool, at least those of the other application pool still works.
And what are the advantages and disadvantages of the two options?
As you note, each application pool uses a little memory. Not much, but as you note, 200 + it adds up. FWIW, the application pool is also part of the connection between IIS and CF, and there are times where just a recycling application pool (rather than restart CF) can solve a problem.
That said, there certainly are times where CF will be what does not, and it won't matter to the application pools how you have. That's really what you want to focus on: why (if ever) SEE becomes is not responding.
Is there a setting I should change who will say active
instances of w3wp.exe to stop if no activity takes place for a certain
time to release the memory.
It is the default behavior of the application pools. See the "Advanced settings" for each pool in IIS 7 (or for her properties in IIS 6) for the recycling of various parameters of health protection.
To return to your root cause problem (CF becomes unresponsive), anyway, you say "these sites were without fault on 2 GB of RAM box with two 1 GHz processors. And honestly he ran more surely than it does now. "So what was 'before '? Not just less memory, I guess. He was also 32-bit instead? Was that an earlier version of the CF? It is useful for you to be more specific.
Again, everything that is wrong is an explanation. It looks like you use the CF Server (not multiserver) mode, until you find in the coldfusion9\runtime\logs (not the coldfusion9\logs)? There may be important information before your plant that explains what is happening.
As for your struggles get CF running on IIS 7, I'm curious: was it the 9.0? If Yes, what 9.0.1 (the free updater, which must be installed today on a download of CF9) which supported for IIS 7. Previously, it was indeed a little manual to make work work. And in fact, it may be that an update to version 9.0.1 could help resolve some problems if your manual configuration efforts could have hurt at all.
Hope some of it is useful.
/Charlie arehart
Quick delivery, help desk services remotely, the demand for CF (and CFBuilder)
Maybe you are looking for
-
Keyboard shortcut to click on a button in a drop-down window in Thunderbird Mac?
I recently migrated to Thunderbird 3 on an older Mac OS x 10.4.11 to a whole new Mac OS x 10.9.3. The migration has been almost transparent, and I'm loving many useful features of the new Thunderbird! However... There is ONE thing that I do all the t
-
How to disable when your keys act as shortcuts
When I'm typing some keys trigger other things happen for example if I press C, it opens another window or if I press B it is for me the issue of the keyboard navigation. I tried to open Firefox in safe mood and reset to the default values, but it do
-
Satellite A500/042 - Vista restarts in a loop
Bought new computer was installing Windows Vista Home Premium 64-bit. Installed the system, then it was the system configuration, them he just started to reboot loop.I tried the F8 key, but it gives administrator and user. Administrator is not valid,
-
Hello... I m hear to listen to today... in India, soke of L Android test began to leave today for Moto G 1st generation... So, how do I get?
-
Hello. I have windows Vista service pack 2 and the Degfragmenter of the disc does not work, I tried loking real estate local disck (c) tools defragment now and nothing happens. Research application on the windows cmd or all programs Accessories Syste