Change audio resampling

Similar Questions

• Change Audio routing after sequencing Multicam Multicam

  Greetings - enough esoteric in question here, but bear with me.

  I prefer to implement my sequences blocking with the setting of the order of routing audio all THE CAMERAS. This way, my A1, A2 and A3 audio stays on separate tracks when you drag my multicam sequence in a timeline.

  
  Recently started working somewhere with several Deputy Chief editors, all of you who have their own means to configure multicams. Is there a way to achieve this same audio routing configuration when you use the Multicam Enable/Nested Sequence Workflow? You can change the settings for audio routing sequence afterwards in multicams? I tried to change Audio but gives me just additional tracks duplicate of the mixdown A1, A2, and A3.

  Thanks for any help you can offer!

  After struggling for a few days, I found a fix - create a new sequence multicam out of all taken view/audio you have, assign the parameters of the automatic sequence and audio for all cameras and mono. Then, you can duplicate this multi as much as you want and just paste the contents of the oldest Multis in there.

• How to change audio QuickTime?

  How can I make simple changes to QuickTime audio recordings? Very basic, if you please, I'll have to teach myself.

  I have a MacBook 2011 Pro end, currently running on Yosemite, though I probably should upgrade to El Capitan.

  I did a number of simple audio recordings on QuickTime for a local history site - but why he doesn't seem to be a center of publishing on QuickTime? All the trim option seems to do is cut one end or the other. Once edited, I need to export records.

  I did research install WavePad or Audacity, but there seems to be a lot of traps, in addition to being much more complicated that I need. Surely it should be very simple to what I want?

  Any suggestion is appreciated!

  What exactly are you trying to do? You mention "of the simple changes", but then the adjustment tool does not seem to be enough.

  What are the pitfalls you're worried about using Audacity?

• Windows XP - installation of Realplayer changed audio and video icons

  Running XP Home on my laptop.  I installed Realplayer and all of a sudden all the audio and video elements icons have changed.

  I went into preferences/Options in Realplayer and Windows Media Player to select the default reader for WMP files, and while files now open with WMP, the icons are still those changed.

  In the past, the minute I change associations (i.e. the value of the default WMP player), the icons changed as well, but it doesn't now.

  How to restore the original icons, i.e. If a file is associated with WMP, how can I get the icon to show that it's a WMP icon?

  Thank you

  Hello

  I suggest you perform the steps described in the document and see if it helps.
  How to change or choose the program that starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859
  If the problem persists, I suggest you to uninstall Real player and see if it works.
  Once the icons are back to normal, reinstall Real player and check.
   
   
  I hope this helps.

• After Effects CC 2015 - continues to change Audio output - won't stay like some

  After Effects CC 2015 - output continuous change in the prefs - Audio will remain as selected in prefs.

  Whenever I sleep my Mac or Quit AE audio hardware and audio output mapping goes to something random. Sometimes it switches to the default Mac speaker, sometimes happening at AirPlay, sometimes it goes to built in output.

  I want him to stay on BUILT online OUTPUT.

  So basically every time I use AE with audio, I have to go into the prefs and reset the hardware audio 'built-in line-out' - and the value of mapping audio "integrated line output.

  It's driving me crazy! Help!

  SYSTEM PROFILE:

  AE CC 2015.0.1 - 13.5.1.48

  Presentation of the material:

  Model name: Mac Pro

  Model identifier: MacPro6, 1

  Processor name: 12-Core Intel Xeon E5

  Processor speed: 2.7 GHz

  Number of processors: 1

  Total number of hearts: 12

  (By heart) L2 Cache: 256 KB

  L3 Cache: 30 MB

  Memory: 64 GB

  Boot ROM version: MP61.0116.B16

  Version of the SCM (System): 2.20f18

  Version of lighting: 1.4a6

  Presentation of the system software:

  The system version: OS X 10.10.5 (14F1021)

  Kernel version: Darwin 14.5.0

  Boot volume: Macintosh HD

  Boot Mode: Normal

  It might be time to trash your AE preferences.

• Change audio from stereo to mono I have 14 items!

  Hello world! I have a problem that I really need help!

  I just changed my first Pro CC for first items 14 and I'm using a Windows pc.

  Due to a sound problem, I would like to change the audio from stereo to Mono, due to a problem with noise of crackling on portable devices using micro RODE NTG - 2. (for more information on the problem of mic check this video Audio problems using a Rode NTG - 2 condenser shotgun microphone. - YouTube). This problem is solved through audio from stereo to mono installation and I did it with success on first Pro CC by hitting shift + g key and then to change to mono - I followed by reading this comment (below) on a video about this problem...

  

  Is there a possible way to do on first elements 14! I really need help, like his is very important for a video

  Use the right to fill with the left or left fill with right audio effect. This will take one of your stereos and apply it on the two channels.

• change audio in ae crash to preview live

  Hello

  I noticed that if you have a live preview, which is display (I mean look in after) and you want to change some audio, it crash.

  You must force left after fx.

  The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects this problem: http://adobe.ly/1Il5JYe

• Change audio

  Hello, is there a way to change a project I've worked on it was stereo to 5.1 project?

  Create a new sequence with the good 5.1 Master audio track and then copy and paste it in there.

• Change audio after recording a video of Captivate

  I have a situation where I need to record a video myself. This would be sent to someone else, which would have simply put her voice on the video. To guide, what to talk about where I would be recording the video in my own voice.

  What I want is that the other person should be able to remove my voice after having seen/heard the video and get the same video recorded in his own voice. In other words, no changes to video would be made, just my voice would be replaced by sound.

  Is it possible to Captivate?

  Hello

  Easy, just change the slide with the narration, click on Audio > Record and Captivate will ask if you want to replace the audio existing. After having notified you want to replace it, you can record new audio narration to replace the existing narrative.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• No sound after changing audio settings

  No sound

  using a program called Rotisserie again I pulg the audio the wrong way now, I have no sound and a trigger can u help me

  Hi giselle 323,.

  First restart the computer once and then check if everything works well as expected

  Step 1: Run the FIXIT available in the link below and let me know if it works

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plug in microphone is very soft, there is no icon in 'line' or select to change audio levels.

  Hello
  I have a microphone plug that goes directly into my microphone jack. The microphone DOES not work, but it is almost silent and people can barely hear me.
  The only microphones that appear in the control panel-> Sound are my fault, and there is no icon in 'line' or whatever it is to recognize the microphone so I can change its sound levels. This certainly isn't a problem of pilot mine are all so far and the helmet is not a usb plugin. Disabled and disconnected devices are all displayed.

  Thank you.

  Hello

  Thank you fo contact Microsoft Answers.

  Try to reinstall the drivers. If this fails, try updating the driver software.

  Response if the issue is not resolved.

• Premiere Pro timeline change audio level

  Hello

  I was re-encoding of a bunch of old masters XDCAM the last two days and discovered an interesting problem. When you drag a channel 8 XDCAM MXF in the panel mounting Premiere Pro replaces the audio level of the clip.

  I made this little video showing the problem...

  Is this a bug or I do something wrong?

  Thank you

  Best,

  Kristian

  Kristian,

  This has to with the audio "right pan." This happens when a mono channel is panned Center. To see your appropriate levels, you need to either pan your tracks or to adapt the law to pan. (i.e. panning your first piece of your bars all the way left and right channel all the way to the right in the mixer once you let fall on the timeline and see if your levels do not fall back to-12.)

  I'm not at my post, and I'm never my audio first, so I don't know if it's adjustable in first. But in applications audio as Nuendo, this can be set by the user (right pan 0, - 3db + 3db, etc.) so that levels read correctly for the workflow.

  Maybe someone who is all their audio data in first to their position or fact can tell you how to adjust it. But this should give you an idea of what's going on.

• Change the Source Audio Multicam

  Hello

  I have created one or more blocking sequences. I don't know why, but one of my sequences switches the audio when I switch the camera 1 camera 2. Is it possible for me to change audio sources? None of my other clips blocking behave in this way.

  Thank you!

  I think that I understand what the question is. If I delete the audio melted transition at the front of the clip (which is where I spend the cameras), the audio remains as it should.

• Audio selection in auto Cs5.5 still plays rather then change just the audio track

  I'm a newbie even after moving to DVD SP in yet for the creation of menu blu ray. Ive read and re-read the help files and they seem to be the same for the versions still dating back at least to cs3 for that matter... so I do something wrong or still just simply do not do a very basic thing...

  I'm building a blu - ray with a video of singel track and 2 audio player. I am trying to bind a menu to allow a user to select a 5.1 or 2ch audio version for a feature film. Everything should be simple. I have a menu with several buttons. Each links button on an audio track in my calendar.

  However, when I test my links, instead of simply changing the audio and return to the menu (according to the instructions in the help files), the movie plays from the beginning.

  The correct audio track is played, but it is not my intention, at that time there. I want the user to choose the audio track and then allow the user to press another key play or to another menu and back before the movie starts.

  So, how do just change the audio track but he not play there?

  Aid says use "indicate relationship" so I choose this option and select the timeline, Yes, select the track audio 1 or 2, Yes. But are there any different way to do it if I really wanted to play the track at this time as well. What is the fundemental bit I'm missing here? Something to do with the type of button or a werid overide setting I'm missing? Can still actually do this? its quite frustrating seen arising from the use of SP of DVD, which allows any script, set gprm/sprm registers in a program that does not allow you to do anything beyond creating very very basic.

  Any help would be appreciated. Thank you.

  brand

  maniac101maniac wrote:

  However, when I test my links, instead of simply changing the audio and return to the menu (according to the instructions in the help files), the movie plays from the beginning.

  The correct audio track is played, but it is not my intention, at that time there. I want the user to choose the audio track and then allow the user to press another key play or to another menu and back before the movie starts.

  To return to the menu after changing audio or any subtitle track, you must select the menu desired in the link option specify and change the audio and subtitle accordingly.

  

  In the example above, what I did was, I went on the link specify, the menu, like target and also changed the audio track it and clicked OK

  So here, after pressing button 3 (point 3), I would like to return to the menu and my audio would be handed over to the audio 2 track.

  After that, what timeline I play, that would be played with track audio 2.

  This is just a small example to show how it's done. Define navigation as you want.

• problem of default app audio midi setup

  I don't know if this is a problem with the audio midi application or my amp but I'll ask here in any case.

  I have a Devialet amplifier connected to a Mac Mini via USB for streaming music. In order to play music, I need to select "Devialet USB" in the settings audio first midi. The Devialet can also connect to my wireless one although I have this disabled channel its icon remains in the list audio midi.

  Choose the path of usb was fine for months but recently, whenever I have choose it and start playing music selection changes audio midi 'AIR Devialet'. It does not affect the music and I don't know if the streaming has actually changed to a wireless channel, but I'm puzzled as to why she should do that. I'm still puzzled as to why he only started to do recently. Is there a software upgrade that could affect the audio midi?

  As music plays, always it is easy enough to leave things as they are, but I'd rather know if there is a problem of settings that I can't identify, and, if so, how I can solve this problem.

  Any help is appreciated.

  I suspect it's more a question of system OSX and possibly a better also addressed on the website of the manufacturer. Maybe something to do with Airplay?

  Use AirPlay to stream content from iTunes on your computer - https://support.apple.com/HT202809 - "with AirPlay, you can listen to music, photos and videos from iTunes on your Apple TV. Or listen to music from iTunes on your AirPort Express Terminal or AirPlay speakers. »