change essbase connection to another instance of SSP on a different server

Similar Questions

• BBM PIN changed after, connect to another device, former could be restored?

  Hello

  I installed BBM on my android device, it works very well.

  Then I went to uninstall it because it tends to drain my battery.

  Later, I install BBM on my device another (with a longer battery life) and I connected with same email ID, but my PIN has been changed (but my contacts are always preserved)

  I thought that the PIN is attached with his e-mail account.

  Can I restore my old PIN and how?

  It is possible for people to invite me use my old PIN under my current device with the new current PIN?

  Thank you

  The PIN is unique to the device.  No, you cannot migrate pine between devices (if you were somehow able to hack the client to change the axis to the new, you will probably be locked).  It is one of the BlackBerry's built-in security features.  This is to prevent people from cloning devices (ie. make false BlackBerry devices).

  Your BBM contacts are saved in the database BBID.  They are related to your BBID.

  People should use your new pin code or your e-mail address (BBID) for you send an invitation.

• Apex connection to another instance of Oracle

  Hello
  
  Is it possible to connect another oracle instance where I have a Data Warehouse and I want to make a small apex apex application using tables of this instance. I can't install an apex in this case for internal reasons of companies.
  
  I thought to do a dblink and create views in my apex instance but I would like to know if anyone knows a better way.
  
  Thank you very much in advance for your answers.
  
  Jeroni

  Hello

  Yes absolutely, you can use DBLinks to query/update / etc directly the data in the remote instance. You can also "hide" the DBLink by creating local views which reference the link as you describe.

  Another option is to create materialized views local (that reference the DBLink), the advantage of this is that the data is stored locally (rather than using the view or the method direct dblink), so performance should be better. The materialized view can be refreshed periodically according to your needs (if you still need access to the data so newer than this method may not be suitable for you).

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Why Windows XP Pro creates another instance of the printer when I connect my USB printer,

  I am running Windows XP Pro SP3. I have a HP LaserJet 1100 printer (parallel) through a parallel to USB adapter. It seems that whenever I connect the printer to my laptop, another instance of the printer is created, so I have HP LaserJet 1100 (MS), HP LaserJet 1100 (MS) (1 copy), HP LaserJet 1100 (MS) (copy 2). Only one of these printers may also appear online at the same time. Sometimes I use the laptop in a dock and connect the printer to one of the 2 station USB ports, and sometimes I connect the printer to one of the 2 USB ports on the laptop.

  How can I consolidate all of these instances in a single printer so that I can have a consistent default printer? Or, how can I prevent this from happening at all?

  Bruce B, Massachusetts

  This happens because you have connected the printer to different USB ports.  The same thing happens when you connect any device (e.g., a mouse) on different USB ports, but unlike "Printers and faxes," Device Manager shows only the devices not present ("ghost") if deliberately do you.

  If having the extra icons printers and faxes you, right-click on it and select "Delete" - and then always connect your printer to the USB port.

• How can I change the connection to the NETWORK of a new Essbase cube?

  I developed a report EN by configuring Essbase 'A CUBE'
  
  Now, my client is that decommissioning, and they built a new Essbase "CUBE B"
  
  So, how can I change the connection to the NETWORK and assign a new cube?

  I guess that you have space to work.

  Within the workspace.

  1. go into tools-> change of database connections.
  2. Select the file that you want to change the source.
  3. click on OK
  4. change the Source with "replace with:" drop-down list, click OK.

  Dan

• Connection of multiple instances of ColdFusion 10 to a single server Apache 2.2

  It is replicated from site "Server failure" StackOverflow. The CF community is under represented, so I post here also.  Sorry for "cross-post".

  It's on Windows 7 Home Premium edition.

  I had two instances of ColdFusion 10 (update 2): "cfusion" (the default) and "scratch."

  I had a single instance of Apache 2.2 running.

  In Apache, I've set up two virtual servers, each of which must be served by another instance of ColdFusion.

  Each CF instance serves files through an internal web server to Tomcat. Apache serves as vanilla HTML files too. If instances of CF and two virtual servers separately work OK.

  I can get wsconfig.exe to connect either of the CF instances to the Apache Server and serve files via Apache and this instance CF.

  However I don't find a way to connect the second instance of CF at Apache, so that two instances of CF are connected, each serving one of the virtual servers. WSConfig doesn't seem to understand the concept of "multiple instances of CF", and the changes it brings to the httpd.conf (via mod_jk.conf) does not seem to be implemented so as to take account of multiple instances of CF, speaking to a single instance of Apache, or several virtual servers. I will admit not being fairly confident with mod_jk (or even really httpd.conf) operation to be able to guess if I can change things to make it work.

  If I try to add the second instance of CF using WSConfig, I received a message "the web server is already configured for ColdFusion. Whatever it is... not the instance of ColdFusion - what I want to connect to. If I remove the connector in any instance is already connected, I can connect and then a no problems. Not that this helps, but it demonstrates that the CF can connect to Apache.

  All of this used to be relatively straight line fwd under older versions of CF and JRun :-(

  The docs just I found are on the page "Connect multiple Apache virtual servers on a web server to a single ColdFusion Server" (http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd 5 html), but that precisely only addresses a single instance of CF. There is no equivalent page for several instances of CF.

  I hope a little I can move some of the config of mod_jk in my virtual host entries in httpd - vhosts.conf (that's how it used to work for JRun), but I have no idea what to put where.

  I think I covered all the necessary info here? If not, sing and I'll add more. Thank you.

  Anyone?  See you soon.

  --

  Adam

  HA, in fact, I see the question ServerFault replied back right after you asked me: connecting multiple instances of ColdFusion 10 to a single server Apache 2.2 - Server Fault

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• Update error, bridge U44M1P36 another instance of Setup is running.  Wait until he finished, and then try again.

  I tried, in vain, four times, to constantly update bridge and it brings up the error U441P36, another instance of Setup is running.  Wait until he finished, and then try again.  Thanks for your suggestions for resolution.

  I shut down the computer, and Windows 10 had an update.  I waited for the update of Windows 10 load and then turned the computer back on.  I opened creative cloud and bridge update was available again.  This time the update ran properly, bringing customary dialog regarding making changes to the computer.  The update then installed correctly.  Problem solved.  I still have no idea what the underlying problem has been...

• Is there a way to change the connection string to the database by using the command line on the virtual machine?

  Hi, I use 1.5 space Horizon

  can someone help me by telling me where I can change the connection string for the database on the virtual machine itself.

  I was away, and our stuff has been migrated databases to another server. Now my horizon does not connect because it can not find the database. I can either on the hwconfigurator.xxx.com.

  Thank you

  What do you see when you go to https://hwconfigurator.xxx.com?

  You can try to change this property in /usr/local/horizon/conf/runtime-config.properties on your service - will (s) and the server restart of tc by using the command "/etc/init.d/horizon-frontend restart".

  datastore. JDBC. URL = jdbc:PostgreSQL: / //saas? = stringtype unspecified

• Button makes visible subform, and then adds another instance

  Hello

  I have a button that makes a subform visible. Which works very well.

  I would like the button when a user clicks a second time to add another instance of the same subform. Is this possible? I have no idea how start with the JavaScript for this and would appreciate help.

  Thanks in advance,

  MDawn

  Rather than raise the subform, and then adding cases you can do simply by using the instances, then the button does the same thing.

  To 'hide' the subform using the instances, make sure that under binding that the Min County click on and the initial count is set to 0 (zero) - your subform is now hidden by default.

  Change the code you have showing the subform to use addInstance() instead of the presence, using the underscore for the Instance Manager shortcut (you must use the underscore method, because the instance does not yet exist):

  _hiddenSubform.addInstance (true);

  If you remove instances to zero then the subform will disappear again. Doing it this way also has the advantage of reset all data in the subform.

• How can I change the connections of source and target OWB?

  Hello, I have hurt to change the connection to the source in OWB.
  
  My login name of source is identical to the front. That DB name, schema name is now moving to connect to the source. Here are the steps that I did.
  
  1. went to control Center Manager and cancel the mapping of source.
  2. is go explore connection and right click on the connection to the source, and then click Open Editor. change the username, ip address, password, name of the comic.
  3. goes to control Center Manager and redeploy the mapping. It does not work... It is said, table or view does not exist.
  
  Is there somewhere else I need to change... Somewhere, Miss me...
  
  Any help is appreciated...

  Hello

  Go to the module using the mentioned location.
  Change the module, set the location of metadata to the correct location
  Go to data locations, the correct location should be with selected locations. If so, remove it and place it again.

  Now, go to the configuration of the module and go to the Identification
  Check the value of the location and make sure that it uses the correct location

  I think it is sometimes useful to change the location to another location and back to the correct location.
  I hope this helps.

  Kind regards

  Emile

• Unable to connect to an instance by using EM but properly connect with SQL * more

  Hello
  
  I followed the following steps (from the document s/n 2 days):
  
  1. I created a model (including the database) to an instance named "orcl" using DBCA, before we proceed to create the model, DBCA informed me that the Forum might be stopped, I told him to go ahead.
  
  2. the model has been successfully created.
  
  3. I am now unable to connect to the instance orcl using EM, but I can connect to this instance without any problem using SQL * more.
  
  Question: Why am I not able to connect to the instance by using EM? and what should I do to fix this?
  
  Thank you very much for your help,
  
  John.
  
  PS: in case it may be useful, the listener tnsnames and Sqlnet files follow:
  

  # listener.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = CLRExtProc)
        (ORACLE_HOME = E:\Oracle\product\11.2.0\dbhome_1)
        (PROGRAM = extproc)
        (ENVS = "EXTPROC_DLLS=ONLY:E:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      )
    )
  
  ADR_BASE_LISTENER = E:\Oracle

  # tnsnames.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DBCA =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = dbca.localsite.com)
      )
    )
  
  ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (CONNECT_DATA =
        (SID = CLRExtProc)
        (PRESENTATION = RO)
      )
    )
  
  LISTENER_ORCL =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
  
  
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl.localsite.com)
      )
    )

  # sqlnet.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  
  SQLNET.AUTHENTICATION_SERVICES= (NTS)
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

  I think you change some configuration of your system as domain/IP address/host name.
  You need

  set ORACLE_SID=orcl
  emca -deconfig dbcontrol db -repos drop
  emca -config dbcontrol db -repos create
  

  then after result

• How to call a bunch of another instance?

  Hi all:
  How to call a bunch of another instance?
  
  for example:
  
  package A is for instance A1
  
  Package B belongs to instance B1
  
  
  Now, I want to call package B A1 pending, how can I do? my environment is oracle 10g
  
  
  
  
  
  Concerning
  Terry

  If the instance A1 and B1 instance is not in the same machine, can I use the same db link to connect?

  YES

• Apex application connect to multiple instances

  My company is in evaluation mode. We currently have a forms and reports 10g application (using Oracle Application Server 10 g) hat allows access to several databases that have the same repeated patterns in each, i.e. production, test, etc. Schemas have the same database objects, be they in production, test, or to another instance.
  
  If we migrate the application at the APEX, we have repeated in every instance application or can you have in one and are based on tnsnames.ora database file to allow the application to access the data in this other forum? Or is there another way to keep the application at the APEX, in one case and still allow users to connect to other databases?
  
  Thank you for your help.
  
  Stacey

  Stacey,

  When you install Apex in a db instance it creates two schemas. apex_030200 & flows_files.
  The apex_030200 scheme is at the heart of the apex, it contains the files needed to make the generator of the app, sql workshop and all the rest that allows you to build an application. It contains also all applications built within the apex so by the developer.
  Flows_files contains all the files you downloaded a developer could download and use.

  From you create them a workspace to develop your applications in. You then associate this workspace with one or more schemas on this instance. (It can create the schema or you can use an existing one) It's your user data
  Here's the info on the who is a workspace:
  Workspace: (from page 26 user's Guide documentation) http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838.pdf
  Oracle Application Express allows a single database of very many users host.
  Users work in a dedicated workspace called a workspace. A workspace is a virtual
  private database that allows several users to work in the same Oracle
  Installation of the application Express while keeping their objects, data, and applications
  private. This flexible architecture allows a single database instance handle
  thousands of applications.

  My suggest would be like what others have said:
  (1) install apex on each instance that you want to use
  (2) develop your applications on a single instance and then export/import the app to other instances just as you would with any other software development system.

  (3) in the HTTP server as HTTP requests to the db channels, you can edit the file dads.conf to your applications and use something like:
  
  

  Within each of them, you point to db by a connection string.
  By doing this method here would use you that AN http server to accommodate the many different environments in a number of instances, maybe it's what you tried to get your message across, maybe not.

  Hope this helps,
  Justin

• Export configurations of SLA from one instance to another instance?

  Topic: Export configurations of SLA from one instance to another instance?
  
  Team,
  
  No matter what we've tried to export configurations from one source to the target instance? We have the challenge by completing all the settings for 60 BU during the introduction of the end of week.
  
  Any ideas are appreciated.
  
  Someone tried this - http://oraclecs.com/create-your-own-workspace-set-an-accounting-methods-builder-context.html
  
  Rgds,
  Hervé

  We had exports for ALS for an instance to another instance. This requires the simultaneous program "Export Application accounting definition" of the source system. This must be managed separately for each application for which the SLA is changed individually. This will create individual files (for individual applications run) in the path provided during execution of the query (for ex/usr/tmp).

  Now these files can be moved by the ADMINISTRATOR of the source system to the target system on the same path. In the target system, we ned to run the "Import Application accounting definition" program, again individually for each application. This automatically import the SLA changed in the target system and validate the same also.

  (Note: demand must be performed in incongruous individual application itself.) For ex - if we export/import SLA for AR, we need run demand for accountability of the AR.

  Also note that the custom sources are not exported by this method. They must be manually created in the target system)

  Hope that clarifies

  Serge