Change hot IP address of a server of db

Similar Questions

• Prime Infrastructure 3.0 - change the IP address of the server

  Hello

  I wonder if it is possible to change the IP address of a server IP v3.0. If so, it is a simple and painless as operation:

  -stop services,

  -change the ip mode t conf

  -start the services

  Thanks in advance, I have not found a topic (maybe I missed it) in the administration guide

  Kind regards

  Abel

  I got this done exactly that way.

  The only thing that was weird was that address source RADIUS still showing old IP.  After you apply the same settings, it's OK.

  ARO

  Branko

• Changing the IP address of the server running vCenter 2.5 U4 affects Update Manager Plugin

  Hello

  I have vCenter 2.5 U4 installed on a test server.  I now want to move it into production and need to change the IP address of the server.  All is well except the Manager Plugin update does not work.  When I connect to vCenter it gives me the message: "request failed because of a logon failure.   When I connect to vCenter it gives me the message: "Object reference not set to an instance of an object."

  I looked in the logs and found that she always tries to connect with the old IP address of the server:

  "System.Net.Sockets.SocketException: a connection attempt failed because the connected party responded properly after a period of time, or an established connection failed because connected host has failed to 10.250.48.230:443.

  My question is where can I change here to access the new IP address that I put in the server.  I found the address in "vci - integrity.xml" and change it in there but it always wants to connect to the old address:

  “”

  Note: The change was 10.250.48.230 to 10.250.48.130.

  Is there also, I need to change?  Or do I need to UNINSTALL Manager Plugin update and then REINSTALL?

  Thanks in advance,

  Rick Townsend

  I would try a repair installation, because I think it will prompt you to enter the appropriate IP information there.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

  

• Unable to connect to APEX after changing the IP address of the server

  Hello
  
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.
  
  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  
  Thank you very much
  Best,
  Peter

  Hi Peter,.
  >
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.

  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  >
  With EPG, you don't need to make any configuration changes, you have to work on the new IP/hostname.

  You could try running the following just in case wherever it may help, as SYSDBA

  SQL> EXEC DBMS_XDB.setlistenerlocalaccess(FALSE);
  SQL>COMMIT;
  

  See you soon,.

• Service does not start after change of IP address on the server of SRM

  Here is the log.  The IP address has been changed, but I don't know how to take the side of MRS.?

  Journal of VMware Site Recovery Manager, pid = 4064, version = version 1.0.1 build-128004 =, = release, section = 2 option

  Cannot create the writer console

  Value flush dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware Site Recovery Manager\DumpFiles"

  The initialization of the DBManager

  Current working directory: C:\Program VMware Site Recovery Manager\bin

  TaskMax = 10, IoMin = 1, IoMax = 21

  Try DrExternalRecoveryApi

  Plugin path 0: dr-external-recovery - api dll

  Absolute path of the plugin 0: C:\Program VMware Site Recovery Manager\bin\dr-external-recovery-api.dll

  Try RecoverySecondary

  Plugin path 1: dr-secondary - recovery.dll

  Absolute path of the plugin 1: C:\Program VMware Site Recovery Manager\bin\dr-secondary-recovery.dll

  Try SanProvider

  Plugin path 2: dr - san - provider.dll

  Absolute path of the plugin 2: C:\Program VMware Site Recovery Manager\bin\dr-san-provider.dll

  Try TestProvider

  Plugin 3 path: dr-test - provider.dll

  Absolute path of the plugin 3: C:\Program VMware Site Recovery Manager\bin\dr-test-provider.dll

  DrExtApi Instance of Service is initialized.

  Plugin has started.

  'SanProvider' provider has MoRef 'dr.primary.SanReplicationProvider:PrimarySanProvider '.

  Registered provider 'SanProvider '.

  'SanProvider' provider has MoRef 'dr.secondary.SanReplicationProvider:SecondarySanProvider '.

  Registered provider 'SanProvider '.

  Plugin has started.

  ' Provider 'TestProvider' has MoRef ' Dr. PrimaryTestProvider:primary - test provider.

  Registered provider 'TestProvider '.

  ' Provider 'TestProvider' has MoRef ' Dr. SecondaryTestProvider:secondary - test provider.

  Registered provider 'TestProvider '.

  Plugin has started.

  LocalSite already installed - good!

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  VC connection: connection as the user "administrator."

  VC connection: logged in session F5EDC747-1344-4F98-82FB-038BB9D42933

  The specification of proxy for extension com.vmware.vcDr points to 172.20.0.168, not to this host

  Check with the local VC server is not valid

  Initialization of service content: unexpected exception 'class Vmacore::Exception' record with the local VC server is not valid

  Application error: check with local VC server is not valid. Closing...

  Unable to send the request. A new attempt. Error: class Vmacore::CanceledException (operation has been cancelled)

  VMware-Dr. service stopped

  Z OS

  I tried this on my own server and that you couldn't make it work.  I ended up just reinstall SRM, keeping the same database - NBD since most of the settings are there anyway.  Later, I came across a blog (which I can't find now) that said that VMware supports only a reinstall after changing the IP address.

• What are the utilities of command line that will allow me to change an IP address for the server?

  I have an ESX 3.5 Update 2 installed and I need to change the IP address of the Console to the Server Service.  I do not have the server in the VIC, the server is located on a secure subnet and I need to change the IP address to the IP Address of the secure subnet.  Can someone let me know where I can find the commands to do?

  Thank you

  John

  see this KB

  http://KB.VMware.com/kb/4309499

• change the IP Address of the server.

  Hi hussein.
  
  We have an EBS R12.1 running on the server linux OEL, with IP 192.168.1.100
  The network admin want to change it to 192.168.10.211 for standardization purposes.
  How can I make my EBS R12 to adapt to this new IP address? AutoConfig is the solution? or should I run cloning?
  
  
  Thank you very much
  
  
  Ms. K

  Hello

  You will need to purge the table as shown FND_NODES (Note: 260887,1 - steps to own non-existent nodes or IP addresses of FND_NODES) then tun AutoConfig on the node of the database layer and the application layer node. Start application services once you are finished.

  If you get a blank page, please compile JSP files manually using "perl ojspCompile.pl - compile - hunting Pei 2 ' command.

  Thank you
  Hussein

• After changing the IP address of the server licenses and Virtual Center... «not enough licenses...» »

  Hello

  We change the Virtual Center and the license server IP (I saw here how to do it stop Virtual Center, change, delete and add servers... etc...). Now the virtual Center its ok, but when Ive tried to make the cluster, virtual center of reports me a "there is not enough licenses", and I lost the connection to the license server... any ideas?... I reread the license server, restart the Center Virtual/license server... restart the hosts... Remove and add hosts again...

  Thanks in advance

  See the bottom of this knockout under NOTE:

  http://KB.VMware.com/kb/5850444

  Also check that your features licensed licensed Source is always pointing to the correct license server.

• How to change the IP address of the EBS Server

  Hello

  I need to change the IP address of the server EBS R12.2.4 mi.

  I only edit the/etc/host file?

  Thank you.

  Luis.

  N °

  You must do several things. Take a look at this document:

  Correct the method of changing the IP address in 11i & R12 (Doc ID 751328.1)

  Kind regards

  Bashar

• How to change the IP address of the linux server

  Hello
  
  I want to change the IP address of my RHEL 4 server. I use 10.2.0.4 with R12.1.3 E-business and my instance is the only level. I have doc "How change the IP address on a R12 EBusiness Suite Installation [ID 554843.1]" but it could not help me.
  
  
  Thank you
  Krishna

  Salvation;

  Please see below note and links. If you have any questions please update thread:
  How to change IP address in an Oracle Applications environment [ID 553318.1]
  How to change IP on a R12 EBusiness Suite Installation [554843.1 ID]

  See also:
  http://AppsLab.blogspot.com/2009/08/IP-address-change-on-existing-R12.html
  change the IP Address of the server.

  Respect of
  HELIOS

• Change the IP address of the SQL of Virtual Center Server

  Hello

  I'm in the middle of a passage of the intellectual property, and I moved with success all of my vSphere infrastructure, including the server vCenter, of new IPs.  All that's left to move is the WIndows box runnung the SQL database for vCenter.  Can anyone describe the steps necessary to change the IP address of the SQL Server?  Is it as simple as stopping the service and change the IP?

  Thanks in advance for any help.

  stop the Server Service vCenter, update your IP address to your SQL Server and test your ODBC connection.  If all the good tests, just restart the vCenter Server Service.

• Change DNS IP addresses on the ESX host server

  Hello

  I need to change the IP address of my Windows DNS servers on the my ESX hosts. I know I can do this through the vsphere client, but that requires a reboot of the servers. Is there a way I can do this via ssh by changing a file that will not cause a restart of the host? If so, please describe how to do this.

  Also, if the host is restarted, what will happen in the virtual machine of in the interval until the host is upward? It will cause the virtual machine to restart as well, or so I have to restart their after that the host is back? I also disabled HA until I did the DNS changes.

  Thank you.

  normally, I'm a "network service restart. sure enough...

• change my IP address

  I'm changing the IP address on my P1505n, but I can't access the HP integrated web server to do this.  Can someone point me in the direction of a solution?

  Hello

  Try power cycling the devices:

  Unplug the printer and the router from the power for 30 seconds, plug the router on and leave 2 minutes to initialize, then turn on the printer, allow a minute and check for the difference.

  If it persists, try to unplug the ethernet cable and plug it back it both the printer and the router, so try to plug it into another port of the router.

  If it persists, try another ethernet cable and check any change.

  Please let me know the results,

  Shlomi

• Cannot change my IP address

  I tried to change my IPv4 by turn off my modem settings network and cmd prompt does not. Is there something I can do? Also, I noticed that when I use ipconfig / renew, I get the message ' year error occurred while releasing Interface Loopback Pseudo 1 interface.» The system cannot find the specified file. "I'm on the internet, but I wonder about this error message and if it has something to do with my inability to change my IP address.

  My ISP people seem lost on the issue.
  I'm changing my IP address as a chat IRC room is apparently glitched and reaching the operator/s by e-mail was a problem.

  Thank you.

  VFNNJ

  McAfee, no. I use Avast! and the Windows Firewall. Although my machine came with McAfee which I removed with the help of their removal tool.

  Interesting, the lease obtained seems to be the same time as before, but the expiration is now close to 02:00, so it is moved to the top of 5 hours or more.

  And once again, means the error message that occurs after the command ipconfig / renew-"an error has occurred all releasing interface Loopback Pseudo Interface 1. The system cannot find the specified file. "- matter?

  Thank you.

  Last question: no as long as your interface PHYSICS REAL releases and renewed.

  When the lease expires, it repeats.  So why I said that, so that you can get an IP address, you would have to turn off your machine through several cycles and hope that someone else either did the same thing and light them before you do and get your old IP address or someone adds a new device after expiration of your lease and clears the memory cache (for the DHCP server) and happen them to get your old IP address When your device is turned off.

  Most of the people will keep the same IP address from their ISP for years.

• HP laserjet professional P1606: how to change static ip address for HP laserjet professional P1606 dn

  Dear Sir.

  I have the professional printer hp (hp laserjet P1606) model, I have connected the printer to my router by ethernet port. Thus, he got a dynamic IP, that we know changes this dynamic IP most of the time and create problems. If I click on the ip address of the hp printer on the list of clients of wifi router. There is possibility to provide the static ip address for printer I did and gave a static ip address. a few days later the router has been restored and then I face the problem is I couldn't Ministry the ip address of the printer.   How can I access the ip address of the printer... because until the printer is not an IP and I click on the ip address and a printer page does not open I couldn't change the ip address or the type of static or dynamic ip... .the photos I have uplaoded...

  

  Hi @Tahir-Mehmood,.

  I would say to restore the printer back to factory settings. HP LaserJet Pro P1566 and P1606dn - default settings factory restore printers.

  Then, the router must assign a new IP address to the printer and you should then be able to again access the server built-in Web printer.

  If the router assigns the printer IP address automatically, temporarily connect the printer to the computer using the Ethernet cable and ad hoc of the printer. This will give you an IP address so you can access the printer built-in Web server, and then you can configure the IP address again through your network.

  I hope this helps. Thank you.