change the color in the colorpicker

Similar Questions

• How to change the color of the same colored sections of an image according to the colorpicker. ?

  Hello.. How are you all... ?

  
  I do a small program to change the color of these sections of an image that have the same color, according to the chosen of the colorpicker color...

  
  Say of the colorpicker, we selected a color, and then mouse click on the image event changes the color of those parts of the image that have the same color as the selected portion (or pixel) to the selected color... If we have selected FF0000 in the colorpicker and then clicked 3300CC color pixel in the image. This should change the color of all pixels of color-3300CC in the image...

  I have a colorpicker [colpickr] and a movieclip [mc] the image on the stage. I created a bitmap of the same image (imag1) using the code. Select the color in the colorpicker and a mouse click on the movieclip (here I used getPixel) will change the color in the bitmap image to the selected (with setPixel) color. I have two images; one is a movieclip (inorder to add the listener for the click event), and one is a bitmap (to set the setPixel property). But I need a single image.

  Please help me with this... Below is my code (horrible)...

  import flash.events.MouseEvent;

  Import 12345678910111213import;

  import flash.display.BitmapData;

  import flash.net.URLRequest;

  import flash.display.Loader;

  var c = 0;

  var myBitmapData:BitmapData;

  var bm:Bitmap;

  colpickr.selectedColor = 0xffffff;

  preLoader var;

  var urlReq;

  var preloader_img:MovieClip;

  preLoader = new Loader();

  preLoader.unloadAndStop ();

  urlReq = new URLRequest ("imag1.jpg"); I chose the same image as that of movieclip mc
  

  preLoader.load (urlReq);

  preLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, preLoaderComplete);

  creates a bitmap of mc...

  function preLoaderComplete(loadEvent:Event) {}

  myBitmapData = new BitmapData (mc.width, mc.height);

  myBitmapData.draw (mc);

  BM = new Bitmap (myBitmapData);

  addChild (bm);

  BM. Width = mc.width;

  BM. Height = mc.height;

  }

  mc.addEventListener (MouseEvent.CLICK, _onMouseClick);

  Gets the color of mc and affects the color bitmap

  function _onMouseClick(event:MouseEvent):void {}

  var myColor:uint = myBitmapData.getPixel (mc.mouseX, mc.mouseY);

  c = myColor.toString (16);

  for (var i = 0; i < bm.width; i ++) {}

  for (var j = 0; j < bm.height; j ++) {}

  If (myBitmapData.getPixel(i,j).toString (16) == c) {}

  myBitmapData.setPixel (i, j, colpickr.selectedColor);

  }

  }

  }

  }

  Try this:

  import flash.events.MouseEvent;

  Import 12345678910111213import;

  import flash.display.BitmapData;

  import flash.net.URLRequest;

  import flash.display.Loader;

  var c = 0;

  var myBitmapData:BitmapData;

  var bm:Bitmap;

  colpickr.selectedColor = 0xffffff;

  preLoader var;

  var urlReq;

  var preloader_img:MovieClip;

  preLoader = new Loader();

  preLoader.unloadAndStop ();

  urlReq = new URLRequest("z_bitmaps/image1.jpg"); / / I chose the same image as that of movieclip mc

  preLoader.load (urlReq);

  preLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, preLoaderComplete);

  creates a bitmap of mc... ;

  function preLoaderComplete(loadEvent:Event) {}

  BM = Bitmap (loadEvent.target.loader.content);

  addChild (bm);

  }

  stage.addEventListener (MouseEvent.CLICK, f);

  function f(e:MouseEvent):void {}

  If (BM.hitTestPoint (MouseX, MouseY) &! colpickr.hitTestPoint (mouseX, mouseY)) {}

  _onMouseClick (e);

  }

  }

  Gets the color of mc and affects the color bitmap

  function _onMouseClick(event:MouseEvent):void {}

  c = BM. BitmapData.GetPixel (BM. MouseX, BM. MouseY);

  for (var i = 0; i)

  for (var j = 0; j)

  If (bm.bitmapData.getPixel (i, j) == c) {}

  bm.bitmapData.setPixel (i, j, colpickr.selectedColor);

  }

  }

  }

  }

• How to change the value of a color picker?

  Hi *.
  
  I am currently working on a small project and I would use the colorpicker. When I initialize the colorpicker, the widget is updated and displays the correct color, but when I try to change the value when running, nothing happens. I missed something?
  
  Thank you very much
  

   
  package javafx.tests.colorpicker;
  
  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.geometry.Insets;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.ColorPicker;
  import javafx.scene.layout.StackPane;
  import javafx.scene.layout.VBox;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  
  public class ColorPickerChangeColor extends Application {
  
       public static void main(String[] args) {
            Application.launch(args);
       }
  
       @Override
       public void start(Stage stage) throws Exception {
  
            VBox vbox = new VBox();
            vbox.setPadding(new Insets(10));
            vbox.setSpacing(10);
            Button button = new Button("Press me.");
            final ColorPicker colorpicker = new ColorPicker(Color.BLUE);
  
            button.setOnAction(new EventHandler<ActionEvent>() {
                 @Override
                 public void handle(ActionEvent arg0) {
                      colorpicker.setValue(Color.YELLOW);
                      System.out.println("Set color of the picker to yellow.");
                 }
            });
  
            vbox.getChildren().add(colorpicker);
            vbox.getChildren().add(button);
  
            StackPane root = new StackPane();
  
            root.getChildren().add(vbox);
            stage.setTitle("ColorPicker");
            Scene scene = new Scene(root, 200, 200);
  
            stage.setScene(scene);
            stage.show();
  
       }
  }

  Published by: 963445 on January 3, 2013 12:23

  Addition of

  colorpicker.fireEvent(new ActionEvent());
  

  After you set the color seems to be a workaround; Although I don't know how it works if the colorpicker popup is displayed.

• By using the selector component of color to change the background is ledge the rest of the elements

  Hello

  I am trying to learn a few scripts for components.

  I have a bunch of work stuff and I got the color selector component to change the color of a clip and another to change the color of the text.

  I have another script that is the background color, but when I use it with this script, it covers the other components.

  How can I use the color picker to change the color of the background of the scene without obscuring the movie elements?

  Here are two scripts:

  fine to plant a script on the 2 elements it targets

  Fl.events import. *;
  Import fl.events.ColorPickerEvent;
  myColPic.addEventListener (ColorPickerEvent.CHANGE, changeHandler);
  function changeHandler(event:ColorPickerEvent):void {}

  var colorInfo:ColorTransform = new ColorTransform;
  colorInfo.color = event.color;
  myBox.transform.colorTransform = colorInfo;
  trace (Event.Target.hexValue);
  }
  myTextPic.addEventListener (ColorPickerEvent.CHANGE, changeText);
  function changeText(event:ColorPickerEvent):void {}

  var colorTypeInfo:ColorTransform = new ColorTransform;
  colorTypeInfo.color = event.color;
  myType.transform.colorTransform = colorTypeInfo;
  trace (Event.Target.hexValue);

  }

  2 - works fine in an empty movie script, but if I add it to the script above, these elements are hidden...

  Import fl.controls.ColorPicker;
  Import fl.events.ColorPickerEvent;
  
  var bg:Sprite = new Sprite();
  bg.graphics.beginFill (0x000000);
  bg.graphics.drawRect (0, 0, stage.stageWidth, stage.stageHeight);
  bg.graphics.endFill ();
  addChild (bg);
  
  var colorPicker:ColorPicker = new ColorPicker();
  colorPicker.addEventListener (ColorPickerEvent.CHANGE, colorPicker_change);
  colorPicker.move (10, 10);
  addChild (colorPicker);
  
  function colorPicker_change(evt:ColorPickerEvent):void {}
  bg.graphics.beginFill (evt.color);
  bg.graphics.drawRect (0, 0, stage.stageWidth, stage.stageHeight);
  bg.graphics.endFill ();
  }

  Certainly, I have that they change colors differently, but I don't know how to change the color of the scene otherwise with this component.

  any thoughts there?

  Thank you

  Babs

  use:

  addChildAt(bg,0);

• Pages 5.6.2, cannot highlight and change the color of the text?

  I use pages 4.3 and earlier of passage to 5.6.2 - I just tried to highlight a word in a document and change the color - nothing happened.  Tried selecting the color first, and then type a new Word and that doesn't work either.  Am I missing something?  Is there any quick way to the color of the text in 5.6.2?

  To well highlight a word or a selection of words in the v5.6.2, Pages you will need to select the text, click the image below on the gear watch icon and set the fill color of your character. To remove the highlight, select your text, click in the ink of fill color of characters and click transparency icon in the lower right.

  

• How can I change the color of Minnie Mouse dress?

  Announcements see the dress of Minnie in red, yellow or blue, but I did not understand how this change in the function 'customize '.  It's three different dials or I missed something?

  Hello

  Follow these steps to change the color of the dress of Minnie:

  • While the airtime on the dial of Minnie Mouse, press firmly on the screen, then press the Customize button.
  • Swipe left / right to switch between the three screens of personalization:
    • The first screen allows you to switch between Mickey and Minnie Mouse by turning the digital Crown.
    • With Minnie Mouse selected, the second Customization screen is used to change the color of her dress, once again by turning the digital Crown.
  • When finished, press the digital Crown twice to return to the watch face.

• change the color of the title effect

  For this example of a readymade title:

  

  I would like to know how I could change the color (red) behind the title of the text.  Let's say, I would like the blue instead, or yellow, or anything else.  I tried a number of ways (just getting used to FCP X).  Y at - it a command for this, or should I make a mask with a different color?  Problem is red is lively, and a mobile mast would be required... sort of complicated as a procedure.  BTW, how these securities were made?  In another program, or can they be changed in it?

  2nd question: How can I extend the follow-up of this text as a sequence of animation?  I tried to change the follow-up by degrees and adding images key, but it does not work.  In other words, when you see the title, shown above, I would like to extend then follow-up.

  Thank you.

  As for the above, I just tried to open the color Board and find I can indeed change body color (see screenshot), but the photo image is also affected by the change of color.  How do I get the color of the title change and keep the color of the photo?

  

• How to change the color of pre-rendered screen.

  My question is how to change the color of the page that is displayed before a site is fully charged. So let's say I go to a site where the background color is red. Before the end of Firefox loading it will appear as white. Also yes I have known that I have an add-on which changes the default color of YouTube. However the first picture comes on all websites no matter if their background is white or not.

  You can try the userChrome.css code or elegant.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  browser {background-color:#f0f0f0!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• How can I change the background color of the sidebar bookmarks?

  Grayish brown (I think) background color does not work for me. I'm a little color blind and the cursor to highlight the selected tab is not enough for me to easily see contrast. I found how to change all kinds of colors in FF, but not the background color of the bookmarks bar. I would like to change the background may be blank.

  I have it! My eyes thank you very much for your help!

• How can I change the colors of fonts that I add to my movies?

  Hi all

  I have a simple question. I have a loot of VHS tapes I've had since Adam was a boy. I've been working my way through them and their conversion into DVD. This is probably very different from what most people use the software for. I've been using iMovie HD until it was more compatible, then Final Cut Express.

  Did not go for a while and decided that I should start using Final Cut Pro. After a few days of fiddling, I'm at the stage where I'm ready to try to make a film I did before (do not take risk). The only thing I can't work on is to know how to change the color of all fonts that I use. So far, all I can use is the color that comes with the model. I want to change because I use my own back grounds. A white font on a light background is a bit difficult to read.

  It was not hard to get that I did. One of the most polite things said about it was when Apple released it it should have been called iMovie HD Pro. I do not disagree with that.

  That's people, thanks for any help you can give. If there are textbooks that would be useful any suggestion would be appreciated.

  See you soon,.

  ugly_dog

  What I forgot last time. Do I have reason to assume that chapter markers are deferred to iDVD when the project is completed.

  THNX,

  ugly_dog

• Your 'change the fonts and colors... '. "Statement said" click (3 horizontal bars) and chose 'options' (in a box)... can not do without this box appears. "

  Due to vision problems, a long time ago I changed the background color for the yellow poster like stark not white. The old system of color choice was fairly easy to change, and one time in a whike I let the colors of the site work like some things were hidden using my colors.

  Several months ago an update of Firefox threw all access learned and now I can not for the life of understand me. I'm more able to perform any color choice. By clicking on the MACHINE shows content but everything is yellow and there is nothing to change.

  An update?

  19john28 said

  Adding a patch complex to solve a simple function seems to be gilding the lily. Firefox you address the simple check box to change the colors.

  Hi John, here on the support forum, we work with the version of Firefox that we know today. You can submit proposals for amendment of functionality for future versions of Firefox here:

  https://input.Mozilla.org/feedback

  It took several years for Firefox to get full support for users of high contrast themes, so I do not expect this choice to be removed. However, if you think it might be facilitated so that everyone can understand, please do not hesitate to use the entry site to suggest another way to implement the selection.

• Address field is red - a color that is difficult for me to see. Is it possible to use the configuration editor to change the color.

  Apparently a bug in Thunderbird is changing the "To" address to the Red even if the recipient is in my address book. The address is displayed when I start typing the first few letters of the recipient, but the text turns red which is difficult for me to see. I want to continue to enter addresses that I always (first letter type or two) would be the simplest solution to change the color from red to something easier for me to read. I looked in the configuration editor but can't seem to find a key that is appropriate for the address field. Can anyone provide assistance?

  Update to Thunderbird 38.0.1.

• Why no Support information about the browser.display.focus_ring_style entry in the config file? Why I can't change the color of the ring update via the config file?

  Currently, using Ver38.
  Used to change the color of focus ring & screws of css styling to help see what link has focus.
  Methods via ' subject: config' to change any focus ring settings are too restrictive.
  Impossible to find info on the entrance of config file of ' browser.display.focus_ring_style.

  This code must be inside the userContent.css file.

• I changed the front and the back as the same color (white), so. How can I change this back? I'm blind now T_T

  I tried to change my background color to black and white text browser. But I change white background first, so now, I see only a few words and symbols. So, please help!

  You can open the topic: preferences denied the address bar of the page and reach the content tab?

  • Subject: preferences #content

  Then you can open the colors window, and change the colors.

  Or open Subject: config page and restore the default value for the browser.display.foreground_color via the context menu

  • about: config? Filter = Browser.Display.foreground_color

• cannot add emoticons or change the color of the text when you write a message to send

  When I type a message to send. I can't change the color of the text, or if I add an emoticon. I can change the size of the letter, featuring bold, italic and underlined.

  If you mean an e-mail message, Firefox is not 'do' by email.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.