change the OS architecture

Similar Questions

• How to programmatically change the limit values

  Hi all!

  I would like to create a special tool to automatically update the test sertain limits in a file of sequence of the external file.

  I learned TS API and I got Posibility to build trees for levels of sequence and to get a type of step.

  And I found only the possibility to change the limits of the stage in the dialogue window, interactively.

  But I want to change boundaries programmatically without using interactive mode.

  Is there this possibility in the architecture of the API, TestStand?

  Thank you for the information.

  Now I understand how to access the properties of the step of the TS API.

  I use the "AsPropertyObject" method to pass the search string in step and have asked the value of the property.

  I hope it will be enough to solve my task.

  Thank you very much for the support.

• (How) Can I change the priority for execution vi when running

  Hi all

  I use the demons (free running VI) and I communicate them through queues.

  They are part of my architecture of device driver and use a producer (of the Acquisition) architecture or Architecture consumer (for control)

  I have a single VI demon I deploy an 'object of device' using a class polymorphic implimentation.

  This implimentation has a deficit of subtle,

  I'm not able to change the priority for execution to the launch

  

  There is a property node taunts that it is possible, but the assistance (and run the error message) says not available during execution.

  Anyone know of another method?

  Here's what I thought about so far:

  1. do you have 5 different demons with different priorities [Distasteful for the maintenance of the Code]

  2. make low priority and ensure that at least 1 VI in the driver has a highest priority [do not know if it works, mask implimentation]

  Kind regards

  Tim L.

  You might think about putting a timed loop or timed sequence in your daemon and then passing a value of digital priority to your demon. This is the best solution I can think.

• How to change the frequency of sampling DAQmx during execution?

  Hello guys. I'm using LabVIEW in the measures of the frequency response function. My application requires the sampling rate to change according to the frequency of the signal during execution.

  I tried to do it with a "structure of the event" and it works well when I change the rate manually via the front control but it backs do not work when I set up the sampling frequency to vary automatically (just a frequency sweep). Photos below:

  Why not the structure of the event feels the change in the value of "rate"?

  Thanks in advance for your help.

  Lucas

  Hello

  In "automatic mode" to change the sampling rate, the calculated rate is written in the local variable (as illustrated in the code).  Structure of the event does not change value in the local variable as an event.

  In order to make the structure of the event to recognize the change in value of an indicator such as event: write the new value to the property "Value (Sgnl)" corrosponding node to rate indicator (see figure below).  This will make the structure of the event accept the value change in the indicator as event.

  Note: Use architectures such as producers and consumers for such applications, which makes the application readable and expandable.

  See rear queries if any.

  

• The internal architecture IDS 4.1 document will be available? where? When?

  Hello

  I see the old architecture internal ID of the Web site of cisco, one with the Director of module.

  Wondering when the internal architecture 4.1 is available?

  If this is not the case, whenever soon, how to make the connection between that I see with version 4.1?

  The documentation team will work on a new architecture for 4.1 document, but it is not yet available. I don't know how long it will take.

  Here is a brief comparison of the differences in architecture between 3.1 and 4.0/4.1.

  3.1 Packetd-> SensorApp 4.0

  3.1 management-> NetworkAccessController 4.0

  3.1 IDM-> IDM 4.0

  3.1 VEI-> VEI 4.0

  3.1 Web server-> 4.0 Web server

  Other 3.1 process do not necessarily have a direct analogy to the process in 4.0/4.1.

  Other processes 4.0/4.1:

  mainApp - responsible of the upgrade and the configuration of the OS base IP, netmask, etc... ; also responsible for triggering of other processes

  authenticationApp - responsible for the authentication of user login

  eventServer - is a web application responsible for sending events to other boxes as VEI. It is often comparable to the post office in 3.1, but is limited to sending only in contrast to the post office which also manages the configuration changes. In 3.1 alarms were stored in log files and IP logs were stored as single files. 4.0/4.1 there is no more log files. Instead, there is a similar to a database circular storage which is called the eventStore and storage of similar type for newspapers of the intellectual property.

  transactionServer - a Web based application; responsible for control operations that are used to changes of ocnfiguration and other orders of Government (such as shunHost)

  Major architectural differences.

  Communication between the squares is more to the post office. Instead, the communication is superimposed on http (s). RDEP and IDIOM specify the formats of messages asking events and sending of control operations. The eventServer and the controlTransactionServer are 2 services web where it is implemented.

  RDEP and specifications of the IDIOM are available by request (please contact the TAC)-based and requires the signature of certain legal documents.

  Configuration is no longer in the symbolic function configuration files. Instead, the configurations are in XML format and should only be changed via the CLI, IDM or VMS user interfaces (advanced users may be able to use LANGUAGE to change configurations by using the controlTransactionServer, but this is not recommended for the majory of users)

  The log files are no longer used. Instead, the events are stored in a circular eventStore of 4 GB, and IP logs are stored in the storage of circular package 500 meg.

  The underlying operating system is now Linux rather than Solaris.

  The standard unix shell is replaced by a more Cisco like CLI to configure and manage the sensors.

  NOTE: The Linux bash shell is always accessed through a special account 'service' ('service' a privilege level assigned to a created user account). To the account 'service' should be used only for debugging and troubleshooting under direction of the TAC.

• Can we change the rt of the window of Windows 8?

  Can we change the rt of the window of Windows 8?

  Can we change the rt of the window of Windows 8?

  No, architectures supported by each operating system are different. Windows RT is based and Windows 8 is x 86 and x 64 base, so even if they look the same, they aren't.

• change the loop condition and cursor

  Hi all

  We have the procedure below:

  PROCEDURE ext_UPLOAD IS

  v_colname VARCHAR2 (30);

  v_tl_colname VARCHAR2 (30);

  v_stmt VARCHAR2 (32767).

  v_stmt_no NUMBER;

  CURSOR DISTINCT_COLUMN IS

  SELECT DISTINCT T_STG DB_COL;

  BEGIN

  v_stmt_no: = 5;

  FOR DBCOL IN DISTINCT_COLUMN

  LOOP

  v_colname: = DBCOL. DB_COL;

  v_stmt_no: = 10;

  v_stmt: = ' MERGE IN EXT_B ED

  WITH THE HELP OF)

  SELECT TAG_DATA,

  EQUIPMENT_FK_KEY,

  WORKORDER_FK_KEY,

  SEGMENT_FK_KEY,

  SHIFT_WORKDAY_FK_KEY,

  HOUR_FK_KEY,

  ITEM_FK_KEY,

  READ_TIME,

  ATTR_GROUP_ID,

  RECIPE_NUM,

  RECIPE_VERSION,

  NVL (FND_GLOBAL. User_Id,-1) l_updated_by,.

  NVL (FND_GLOBAL. Login_Id,-1) l_last_update_login

  OF MTH_TAG_READINGS_T_STG

  WHERE DB_COL = ' | " ' || v_colname | " ' ||') TS

  WE (';)

  v_stmt: = v_stmt | "ED. EQUIPMENT_PK_KEY = TS. EQUIPMENT_FK_KEY AND

  ED. READ_TIME = TS. READ_TIME)

  WHEN MATCHED THEN

  UPDATE

  GAME ED.'. v_colname |' = TS. TAG_DATA,

  ED. LAST_UPDATED_BY = TS.l_updated_by,';

  v_stmt: = v_stmt | "ED. LAST_UPDATE_LOGIN = TS.l_last_update_login

  WHEN NOT MATCHED THEN

  INSERT ('| v_colname |', EXTENSION_ID, EQUIPMENT_PK_KEY, WORKORDER_FK_KEY, SEGMENT_FK_KEY, SHIFT_WORKDAY_FK_KEY, HOUR_FK_KEY, ITEM_FK_KEY, READ_TIME, ATTR_GROUP_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY,';)

  v_stmt: =.

  v_stmt | ("LAST_UPDATE_LOGIN, CREATED_BY, CREATION_DATE, RECIPE_NUM, RECIPE_VERSION)

  VALUES (TS. TAG_DATA, EGO_EXTFWK_S.NEXTVAL, TS. EQUIPMENT_FK_KEY, TS. WORKORDER_FK_KEY, TS. SEGMENT_FK_KEY, TS. SHIFT_WORKDAY_FK_KEY, TS. HOUR_FK_KEY, TS. ITEM_FK_KEY, TS. READ_TIME,';

  v_stmt: = v_stmt | "TS. ATTR_GROUP_ID,' | '''|| SYSDATE | "'| ', TS.l_updated_by, TS.l_last_update_login, TS.l_updated_by,'|"' | SYSDATE | " ' ||', TS. RECIPE_NUM, TS. RECIPE_VERSION)';

  mth_util_pkg.log_msg ('v_stmt: ' | v_stmt, mth_util_pkg.) G_DBG_DYN_SQL);

  -DBMS_OUTPUT. Put_line (v_stmt);

  v_stmt_no: = 20;

  EXECUTE IMMEDIATE v_stmt;

  -VALIDATION;

  END LOOP;

  EXCEPTION

  WHEN INVALID_NUMBER THEN

  RAISE_APPLICATION_ERROR (-20008,'The Data Tag you are tyring to insert the character data is.) A number should instead. ") ;

  WHILE OTHERS THEN

  RAISE_APPLICATION_ERROR (-20008, SQLERRM |' to ' | v_stmt_no);

  END;

  In above query we conduct cursor on DB_COL OF DIFFERENT T_STG, but the above query fails if we have the same db_col, but for groups of different attributes. I want the merge request and loop to work for separate but with given db_col ATTR_GROUP_ID as I have attr_group_id 10 and 20, but two of them may have db_col as n_ext_attr1 and slider should be for db_col and also take into account attr_group_id. can you be it someone please let me know how to change the cursor above and also the loop as well as db_col and attr_group_ ID the two are taken into account.

  Thanks in advance.

  Maybe you need to take a step back and explain exactly what you're trying to reach, providing tables of the example and example, the production of these data in the example data.

  No offence not intended, but your statement dynamic MERGE is not well written, completely does not use bind variables (and why you think concatenating SYSDATE in a stirng as it will work properly, I don't know), and will be a nightmare to maintain in the future.  I'll ignore for now the use of waste from other exception ONCE (even if it's really cr * p coding) you clearly bigger problems to solve first.

  Thus, in addition to providing some data and tables of the example can answer you, why you do not know the names of the columns you try to merge?

  The mention of the ATTR in your instructions seem to feel a bit as if you use a type of entity-attribute-value architecture to your database, is this true? I hope sincerely that no, since it is known to be a performance killer and a nightmare to code and maintain when it comes to relational database engines. (I have a personal experience of having been victims of such a database design, and fortunately, we managed to convince management that the product was not fit for purpose and it was abandoned within months purchased (if only we could see before purchase)!)

• How to change the name of host server IMO?

  Hi, guru.

  Is it possible to change the name of host server IMO?

  Architecture:

  Server A - Oracle RDBMS

  Server B - IOM: admin, IOM, soa.

  Version of IOM - 11.1.2.1.0

  (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used.

  The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM.

  Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved.

  Shortly, the process is as follows:

  1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM.

  2 VMS when copied to the new server.

  3. change the configuration files of MAC, IP, two servers.

  4. change the host name of the DB server. Restore the dbconsole EM repository (if used).

  5. change the IOM servers configuration with wlst listeners.

  6. change the source URL with wlst database IOM.

  7 remove the cache, tmp, newspapers of servers.

  8. replace all references to the old hostname with the new host name in the configuration files.

  9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file

  10. restart Admin, start managed servers.

  11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow.

  12. check the application code for direct reference for host name, change.

• Change the default lease duration

  
  Hello

  
  Is there a way to define a default (for the duration of the lease) when people order a server based on a model?

  
  The default value in the form always seem to be the minimum value of the EHR Architecture. I want it to be possible to establish 1 day as the term of the lease, but is not very easy to use by default.

  
  Is there a magic custom property, that I missed?

  
  Edit: vRA 6.2

  This has been a pretty consistent complaint with plans of IaaS.  Management of leases as a whole needs a few improvements, including...

  1. default configuration (Iaas).

  2. best approvals for the selection of the distance (IaaS).

  3 adjustment range min. - max (Action integrated resources for change of lease) as right now you can extend a 20-year lease if you want without control.

  The last of them, you can move titled do not "change the lease" to the user, and instead of writing your own Action of resource in the DSA to change of lease.  VRO workflow or action of the DSA maintains your constraints field to set the default values, and to prevent a lease of change outside the limits you set.  (for example, no more than 365 days)

  If you have a lease of change with constraints, you MAY (even though I know this isn't your desire) is your lease of IaaS min/max conclude the series (may not be the same) forcing a default value.  For example, you could put 90 min-91max and all the machines that gets built will have 90 days to begin with... then through the action of custom resource lease of change, the user can extend the lease up to one year with a default value for over 90 days.

  Those are the things you can do now.  We put in feature requests better rental management capabilities to penetrate the main product.  (some already have)  More people who want something, it is likely it is prioritized in the effort of coding for future versions.

• How can I change the width of the line that appears when using the distance tool in the toolbar meaasuring

  When I want to measure the distance of a line of architectural drawing and I scroll to the bottom of the toolbar to measure and then I select distance when I measure the distance line is about 24 points. How can I make thinner?

  You should be able to view the properties bar (cmd + E), select the annotation of measure and change the line with setting. If you click on the button 'More', you will be able to select the checkbox 'Use default properties' so any new measure you will have these new settings.

• Cannot change the calendar

  I have a strange solution.
  
  I have a few scheduled tasks and they are all worked well at first.
  Now I can add a new task to the list of schedule and see in the window, but it will never be executed.
  Scheduled tasks can also be changed. Can I delete a calendar and it will disappear in all windows, but it is executed again according to the old calendar.
  I can't even find any error message. It make me mad! Can someone help me? Thank you very much.

  Hello

  You must go to the topology-> architecture phy-> Agent-> select your agent-> planning of the update.

  After that check that everything has been updated to retrieve the scheduling.

  Here is an example (steps 8,9) in odi10g

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/10G/10135/creating_scheduling_scenario/creating_scheduling_scenario.htm#T4

  Let me know

• Changing the Mode of EVC Cluster for guests of Intel

  We cross a turnover of rental for our ESX host that puts out some old CPU architectures. Once we get rid of these hosts, we will be able to raise our EVC Cluster mode.

  (1) once ready, are there special precautions to take before changing the Mode of EVC Cluster? Then I just change the setting?
  (2) when the VMs will begin taking advantage of the new architecture CPU (a reboot will or VMs must they be turned off)?
  (3) any question with VM do not be put off for long periods of time after the VCA mode change?

  (4) all other things to worry about?

  If I raise the EVC mode, virtual machines will be able to access the new features available in this mode?

  Is that you turn off and then turn on the virtual machines. A reboot of the guest operating system is not enough. A virtual machine determines which functions are available to turn on and cannot access all the new features that are added until the power is turned off.

  http://KB.VMware.com/kb/1005764

• How to change the display resolution of APEX?

  Hi guys,.
  
  How to change the display resolution of APEX?
  In other words, if an end-user sees large elements on a page, then it zoomed out there... How can I define a good zoom LENS for my default application...
  
  I hope that my question is simple...
  Kind regards
  Fateh

  Fateh says:

  I hope that my question is simple...

  Nope.

  How to change the display resolution of APEX?

  APEX is not a resolution of the screen. 'Screen resolution' is a property of the device, user agent software used to view the page APEX.

  What do you mean by "resolution of the screen of the APEX?

  In other words, if an end-user sees large elements on a page

  What "big items?

  then it the zoom out

  How?

  "Zooms", what - the whole page or 'big one '?

  How can I define a good zoom LENS for my default application...

  Which means what?

  And as usual, we are missing:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)
  
• Region/item (s)

  You have been posting here for years. You know this basic information is needed to understand and reproduce problems.

  If you need help it does not seem unreasonable that you made the effort to provide a complete, clear but a concise description of the problem or need.

• Change the background color of a region, I can only change the box with text

  Hello. First of all, sorry for my English.
  
  I created a new model of the region in my application and I want to change the entire background to silver color.
  After reading the forum, I tried this:
  
  body = background-color: Silver;
  
  in "attributes in Table form.
  
  It works, but only the area with text are silver. I want the entire region with a background silver, (like a scratch on the screen, with black labels).
  
  My region are copied from the region of breadcrump and there the next CEB code:
  
  < div class = 'wire of Ariane-region' id = "' #REGION_STATIC_ID # ' #REGION_ATTRIBUTES # > #BODY # < / div >"
  
  I also tried putting < body bgcolor = "gray" > in several places, but never with the same results.
  
  Another question. I created a theme in my themes of the workspace to play with it, but... where are the files of ccs? they are not in "/ i/themes"... .and as part of the apex I don't see a way to change the footer, and an other things I want to do.
  
  Published by: Andres Vilallave on February 15, 2012 16:14

  Andres Vilallave wrote:
  Yes!, it works...
  Well, I think I have more visual changes now... (God thank you...)

  Good.

  But I want to learn more about the themes...
  I would like to change the theme 4, "Topaz".
  As you say, I created a copy of the file ' i/themes/theme_4"as"i/themes/my_theme_4 ".

  I have said "+ are not... create new files there as these can be changed by future updates APEX. Create your own theme folder. + ", i.e. to use a different physical location, which is referenced by another virtual folder (depending on the architecture of the Web server used).

  Then I created a new theme based on theme4 in my workspace as "my"Topaz". "" My Topaz"" theme is now available in the repository of the theme in "custom themes.
  Now I can change the templates, etc., but the css files what, image files, etc., are My_Topaz to help? Are ¿where?.
  Guess as you say I need to link "" My Topaz"" theme in the my_theme_4 folder, by assigning files in the models of the apex, how can I I do this?

  The definition of header for each page template in the theme contains elements of binding that reference the URL of the CSS as style sheets:

  These must be changed to refer to the new URL CSS files:

  Notice that the page templates use conditional comments to provide additional style sheets with CSS hacks and fixes for broken Microsoft browsers.

  Some other models can also reference image etc. of localities in theme files (although this is less common in the APEX 4.0 + themes).

• Change the DATE FORMAT in a data store

  I created a few projects with the help of a Teradata technology using tables that allow to CREATE_TARG_TABLE the Yes option.
  
  Model / data store, there are DATE fields, but I can't change the DATE FORMAT, change the field.
  
  When the process starts and creates the table in the database, create using FORMAT of DATE "AA-MM-DD" and I would like to create as "YYYY-MM-DD".
  
  Y at - it a step that I am doing wrong, to be able to change the DATE FORMAT?
  
  From already thank,

  Hello

  --> Physical Architecture topology--> Teradata--> data types, create a new data type (or modify the existing DATE data type), then set it to the desired format of the syntax 'Create Table' and 'Format data type accessible writable.

  That is to say DATE FORMAT "YYYY-MM-DD".

  Then all your tables created will use this format. (I just tested it, it works).

  Let us know if you have any problems.

  See you soon

  BOS

  Published by: Bos July 12, 2011 15:50