Change the size of the HARD disk volume

Similar Questions

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  shrink the volume c: http://www.sevenforums.com/tutorials/2672-partition-volume-shrink.html

  Then create a new volume u want http://www.pcandtablet.com/windows-8-drivers/1216/how-to-extend-volume-in-widows-8-and-take-extra-space-for-a-drive.html

• How to open my R5-571-59DC to change the hard disk

  Can someone explain how to open my r5 - 571 to change the hard drive for an SSD and increase the ram? Thanks much for any help.

  Course, the R series is similar, my R3 has twelve screws at the back. Once removed, the back is pried off. Doesn't have a lot of strength. Connectors must back spilled up to remove. The cables are delicate so always be sweet.

  PS there is a microphone (interlock) under one of the screws two Center. Machine does not except so depressed, so make sure that screws are tight.

• Change the hard disk of 1.4 Ghz Mac Mini end of 2014

  Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

  My Mac is:

  Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

  So, my best regards to the community and hope for a response.

  I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

  • Samsung 850 Evo SSD
  • Cutting Ultra Slim 2.5 SATA to USB 3.0 aluminum hard drive external enclosure

  Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

  Good luck!

• Windows 7 it's without a permit after changing the hard disk (disk image)

  Hello
  I get a frequent reminder of microsoft my pre installed windows in unlicensed. I went through the process of checking online, but this has not helped (prompted him download fails during the installation). I recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & indicates the product ID.

  Can anyone suggest what I should do to get more of this?

  > I have recently installed a new hard drive to a disc image so assume it is related to this. When I check computer / pproperties, all looks fine, it says windows is activated & displays the product ID

  Retrieve the laptop using the Toshiba recovery disc after the HARD drive was replaced?

  The operating system which is part of the Toshiba recovery image has already been activated so the new activation should not be possible and necessary!

  Don t know what is the problem here, but I recommend you to reinstall the operating system once more using Toshiba Recovery disk (I hope that you have created in the past)

• Change the HARD disk in VMWare ESXi 3 Server

  Hi all

  I'm new in the Comunnity. I have the following problem:

  I have a Dell PowerEdge 2950 III with six 7.2 K rpm HDs in RAID 5 running VMWare ESX 3i in an internal USB unit. In this server, I have a virtual machine running a mail server. I have problems of performance of disks in servers and we will change the discs on 15 K RPM drive and change the RAID 10 RAID level. I activated the SSH in VMWare ESXi and my question is: is it possible to copy the virtual machine using Winscp or other method forders, rebuilt my RAID, and then copy these files to VMWare again?

  I'would want to know your suggestions on this matter.

  Thank you very much and best regards,

  Amedina

  You may need to use "add to inventory" since the UUID will be different on the store of data on disks. If we then open the data store with and navigate to the virtual machine. Right click and Add. You answer that you move them.

• RND4000 - change the hard disks, will that erases data on older players

  I took out the old records and set it asside.

  Then put in some different readers. Different drives are from a NAS RNDX4000 and they initialize automatically.

  I wasn't expecting that.

  Now, if I take on different disks and put the old disks in will I lose all the data?

  I need to still get the data on the old disks. They worked very well.

  I don't want them to be initalized.

  The reason is that the RNDX4000 was struck by lightning. Really wanted to get information out of thoes readers. Now, I don't want to lose the information I had in RND4000 work.

  OS 4.x ReadyNAS all begin with the formatting of disks when they are hot-inserted and in many cases even when they are not hot-inserted.

  But if you turn off, insert the old disks in their original locations, and then powered on, then the system should simply repeat the operation without loss of data or reformatting.

• If I change the SO or change the hard disk, I lost the warranty?

  HP Pavilion dv7 - 7047cl Windows 7 64 bit

  Yes. HP will send even a new hard drive to install if the disk hard breaks down as collateral.

• Can I change the HARD drive integrated on my Satellite L50-B-281?

  Hello

  is it possible to change the HARD disk integrated in an SSD? Must be a SATA3 SSD?
  Or it is also possible to install an additional HARD/SSD drive? For example the HARD drive now integrated as a data harvester and a SSD as a system drive?
  Or the DVD player can be exchanged for one SSD?

  Greetings!

  HARD drive can be transformed into SSD and it is the best option, but according to user manuals (to the attached picture) your laptop is not separate from the cover of HARD drive in the lower corner so upgrade disk HARD only is not supported for laptop owners and should be done by authorized personnel only.

  To have full access to the disk HARD lower cover must be removed completely, and if you do it on your own it will void the warranty.
  In my opinion, you should contact the nearest Toshiba service provider and ask for help. This can be done quite quickly and I don't think that it would be expensive.

  

• the size of my hard disk decreases every time I used tune up utilities

  the size of my hard disk decreases every time I used tune up utilities, then I uninstalled tunup utilities, but on cheking the hard dist, I found that I actually used only 368 168 GB but it demonstrates that only 141 Go free instead of 200 GB, how do I find my free space of hard disk?

  Windows 7 - disk space usage reports

  JDiskReport:
  http://www.jgoodies.com/freeware/JDiskReport/
  Shows the use of the space by folder and also great records list 50.
  This will give you a breakdown of your disk space if you can identify what is using all your disk space.
  (Works in Windows 7, requires that Java is installed: http://www.java.com/en/)

  Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

  J W Stuart: http://www.pagestart.com

• When you start firefox, pop-up screen wishes to leave firefox to make changes on the hard disk on the computer. I must say yes, or firefox does not start. Next time.

  Is this a problem of firexfox, or something is wrong with my drive? I don't have this problem when you use IE or Opera, Firefox only. I have to let Firefox to make changes to my hard drive, or it does not start. Once I click on Yes, Firefox works. However, when I close Firefox and try to open it again, the thing is repeated with msg popup to change the hard drive...

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• FAT32 option not available to format the hard disk during Windows 7 installation

  I have a computer of Windows 10.  The owner wants to put on Windows 7.  I change the hard drive on the mbr to gpt.  But with the BIOS to TPG, I read that it, the bios would accept FAT32 hard drive.  I don't seem to have this option only NTFS.  Question: How to format a drive in FAT32.

  Hi John,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  Before you begin, note that the FAT32 file system has size limitations. You cannot create a FAT32 partition greater than 32 gigabytes (GB). In addition, you cannot store a file greater than 4 GB on a FAT32 partition. If the partition you want to format is larger than 32 GB, NTFS format may be a better option.

  However, I suggest you use the steps in this article and check if it helps.
  Reference:
  Format
  https://TechNet.Microsoft.com/en-us/library/cc730730.aspx?f=255&MSPPError=-2147217396

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Additional information:
  Convert a hard disk or partition to FAT32 format
  http://Windows.Microsoft.com/en-us/Windows/convert-hard-disk-partition-FAT32-format#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André