Change the "theme" on the latest Palm Desktop 6.2 v

Similar Questions

• How can you Hotsync a T5 and one E4 with the same Palm desktop program?

  My husband and I had 2 Palm Tungsten, a T5 and an E2. How do you use the same office palm hotsync our Palms? What program would work better for both of them? Thank you!

  All available versions of Palm Desktop can be downloaded here:

  http://KB.Palm.com/SRVS/Nua/launchKB.asp?c=33529

  Please note that what you are looking for is Palm Desktop 4.1.4E.  The E stands for "extended", which is required for the fields in the database of contacts who use the T5 and E2.  If you only download the version 4.1.4 (without the E), you will lose this feature on your desktop.  I think both versions are also the same.

  You will notice that the E2 is not in the list for version 4.1.4E.  It is only because they now recommend the new version (6.2) which was designed for Vista desktop computers.  Unless you have a Vista desktop, you gain nothing by using version 6.2 and you actually lose some features.

  Message relates to: None

• the program palm desktop data recovery

  As I tried to install a new Palm program that came with my Centro, my original program palm information phone that has been on my computer for 6 years was completely wiped out.  It's the 3.0.1 version of the Palm Desktop software.  Is there anyway I can retrieve this information which was on my computer?

  Hello

  Please try to check the user name on the desk of palm (upper-right)
  Kindy check names if they contain your data
  otherwise:

  Please search for a file
  datebook.dat or datebook.bak - this file can contain your agenda/calendar
  Address.dat or address.bak - this file can contain your contacts
  Memopad.dat or memopad.bak - contains your memos
  ToDoList.dat or todolist.bak - contains you tasks

  You can import these data into the new office of palm

  Message relates to: Palm TX

• Where the new Palm Desktop Store files?

  I imported all my files from my old computer with Windows XP and Palm Desktop version 4. XX to my new computer with Windows Vista and Palm Desktop version 6. XX.

  I imported the where I had recorded the on my windows 'desktop' (not the Palm Desktop - a bit "confused, but you know what I mean").  Once imported, I saved the menu 'save' in the Palm, and now I want to know the directory in which the Palm Desktop saved files.  Are they stored in a different directory than where they were imported, for example, Palm saves files imported into an auxiliary file in the folder "Documents" of Windows, or to an auxiliary file in the Windows ' programs' folder under ' Palm /...?  Hope I'm making sense.  I want that all secure, saved in the correct before you start directory to delete the files that I think I need is no longer.

  Hello..  If you imported the Palm desktop and data show there so it's in the correct folders.  The import process creates this data file, calendar/Agenda on this issue, etc.  If you look at c:\my documents\palm os desktop\user name of the folder, you will find all the data folders with an .mdb file that is the data file.

  Message relates to: Centro (Sprint)

• BlackBerry Smartphones can not add or Remove Applications using the latest Blackberry Desktop Application, 700_b060_multilanguage.

  1. I was running Blackberry Desktop BBM 610_b038_multilanguage.

  2. I installed it yesterday, 700_b060_multilanguage.

  3. I was offered an update of my device software, 5.0.0.975 I did not because I wanted to take a backup first.

  4. after the backup, when I tried to update, he told me that no updates exist.

  5. after that, when I plugged in the set, I saw many new options in the Application section.

  6. There was a lot of languages and applications such as Facebook obnoxious that I didn't.

  7. I can't be able to add/remove languages, AND other Applications.

  8. I select (+) or clear (x) my required applications and click apply.

  9. something seems to happen, and then I'm back to the same page where I was with the same Applications installed that were there at the beginning. Two options that are at the bottom of the section that tells the actions pending poster always two actions that were there in the first place.

  10. What can I do to remove the additional languages and installed applications and install this than anything I really need?

  Thank you.

  PAL

  PS. I can't have a data Plan on this subject for the next two weeks or so my number is in migration to be a pre paid to a post paid connection that offers services of BB.

  

  sdgardne wrote:

  FYI... we seem to be discussed a set of interrelated issues on multiple threads... Here is a...

  • http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/cannot-add-a-language-to-my-device/m-...

  I do not know where to consolidate them all for... According to me, that there are more threads with same interdependent questions...

  This is not useful at all.

  Double and permutation on the same questions just causes frustration users trying to follow different threads and various information.

  So let's abandon this thread.

• change the font size of the panels in indesign

  How can I change the size of the font of the control panel and all the other panels in indesign 5.5. I tried to change the default windows desktop, but that does not all Adobe products.

  I'm afraid there is no way to change the font size. Several people here have asked the same thing. More recently, with the latest version of ID where the menus look tiny unless you have a high resolution/large monitor size.

• How to change the UserAgent?

  Is it possible to change the UserAgent for desktop computer to view the full version of websites, a mobile no?

  See:

  • https://addons.Mozilla.org/Mobile/addon/phony/
  • https://support.Mozilla.org/KB/getting-started-Firefox-Android-Tablet-browser

• How can blackBerry smartphones, I change the language of the interface

  Hello

  I have Windows 7 Professional and downloaded the latest Blackberry Desktop 5.0.1. I live in Saudi Arabia, but I need the software in English interface. How can I do this?

  See you soon,.

  Daman

  Hey dman4x4,

  Welcome to the community of BlackBerry Support Forums.

  Try to access this linkand install this Office Manager and he will be in English.

• Change the height and width of the video image...

  In Adobe Premiere Pro CS 5, I can't produce a video larger than the width of the frame (of output): 720 and frame height: 480. The video is recorded in full HD 1920 x 1080 p, but after editing and adding effects in first Pro CS5, changes in video for only 720 x 480.
  
  (1) where the settings in Premiere Pro are modified to produce a video size of the width of the frame: 1280 and frame height: width 720 frame or even: 1920 height: 1080?
  
  (2) is it possible to produce 1920 x 1080 or 720 x 480 max video?

  Your time is appreciated.

  File > new > sequence, then:

  1. Choose a preset that matches or is less similar to your videos, or,
  2. Click the general tab, change the editing for "Desktop" Mode and set the parameters as you need for your videos

  Otherwise, drag a film clip to the button new item at the bottom of the project Panel (it looks like the dog-swamp of paper sheet) and created a sequence corresponding to your images.

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• Problems installing PALM Desktop on XP

  I recently bought a PALM TX to replace a Tungston T.  After a few minor problems, it installs successfully on my work laptop.  Then I tried to install it on my desktop (XP Home) home PC and have experienced significant problems.  Following the Start Here guide I plug my TX before I loaded the software, but the system gave me "unrecognized USB device" constantly.  I started the installation of office, but after a few screens (download far from over), he fails a reboot (I tried this twice).  I disconnected the TX and restarted the installation and it went in the right order.  Computer has expired when I arrived at the stage of 'Synchronization device', I connected the TX and the "unrecognized USB device" came again and when I hit the 'sync' button nothing happened.  In addition, I noticed that the Hot Sync icon installed in the right hand bottom of the screen as it was supposed to.

  I uninstalled the software and tried to restart, reinstall, and even tried to install it from the downloads on the PALM page, including an option 'repair' installation problems.  Nothing works.  And of course it is there nothing on the PALM page: installation problems or even a way to the problem of PALM support by e-mail.

  Is it possible to get this figured out?

  Well, the OS is XP Home.  OK so here's the solution I guess... After trying various scenarios that did not work, I tried just not worth trying to get the new Palm Desktop to work with my TX.  So I unplugged the sync cable.  It is then that I noticed that I had plugged the new sync cable into the USB port to which my old cradle used.  This USB was one that came with my system that is about 4 or 5 years (I think it is called Technology USB 1).  However, I have also a new USB 2 card in my system so I decided to give that a try... and it worked.  The system immediately recognized the new TX and everything worked fine after that.  So I guess the lesson here is that the newest Palm requires the latest USB technology even if I've seen that in any of the documents.

  And thanks to those who tried to help me with this problem.  It's really appreciated.

  Message relates to: Palm TX

• Palm Desktop 6.2 crash.

  I recently moved from a desktop Dell (windows XP) with Palm Desktop 4.1.4 for my Palm Tungsten E2.  I had a desktop software and Pocket PC Palm since before 2000 (back then on Mac) and so I have a lot of information of calendar and contact I desperately need to consult and maintain and never had any problem with handheld computers, desktop computers, or synchronization.

  My new laptop is a HP G61, with Athlon II dual-core M300 2.0 ghz running on Windows 7 (64-bit), which until now has been a dream to use.

  My first installation of Palm Desktop 6.2 on/in respect of 3 January.  He's okay, and then I went to synchronize with my handheld via bluetooth (which a lot of features were again removed from this new version).  For the next few days all was well with the basics but 2 modules does more (DocsToGo and Worlmate).  Then I start the desktop computer on Friday morning (Jan 8) and there was no calendar, address book, memo, ToDo, etc...  The only thing the desktop software offered me was Media (said missing 2 files to work correctly) and install it.

  I tried to reinstall it, and then I removed (using uninstaller) and re-installed, then I uninstalled and deleted the folders/files with Palm in it and re-installed.  Always alone gives me these 2 icons and menu Options gives me no choice at startup either.

  What can I do to get a Palm Desktop to work on my new laptop AND sync with my handheld?  Please help me.

  Right click on the new icon go to compatibility and check the run as admin. Open Palm Desktop of this icon, then see if you see the other Palm Desktop application.

• I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the dr

  I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the drive again - the latest version (DC) it happened again.  How can I fix it?  I am on Windows 7

  Hi donaldm78047015,

  Try the solution mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards

  Nicos

• Impossible to change the desktop theme, screen goes black and blocks

  Original title - Desktop Windows Manager

  Every time I try to change my theme of office (and now every time windows starts), he tells me that I can't run any of the aero themes. I'm trying to troubleshoot my screen becomes black, then I get an error message:

   

  Problem event name: BEX64

  Application name: Dwm.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bc541

  Fault Module name: StackHash_1dc2

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 0000000000000000

  Exception code: c0000005

  Data of the exception: 0000000000000008

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: 1dc2

  More information 2: 1dc22fb1de37d348f27e54dbb5278e7d

  3 more information: eae3

  Additional information 4: eae36a4b5ffb27c9d33117f4125a75c2
  I've updated all my drivers, including the BIOS, I've tried almost all methods I found online to solve the problem, and I would really like to avoid to restore my system simply because this Dwm.exe decided to stop working... I did not install new programs recent, nor have, I changed the parameters significantly... advice?
  I'm running a 64-bit windows 7 Home Premium, Service Pack 1,
  If you need more information on my system, I'll be happy to provide.

  The module failed (StackHash_1dc2) is not formally identified.

  You can check the event viewer for error and see if the module failed is identified:

  Start > type eventvwr in the box "search programs and files", then press 'Enter' > expand "Custom views" > "administrative events.

  Are looking through 'administrative events' Application errors involving Dwm.exe

  Double click on each event for more details.

  The symptoms you have described as the loss of Aero, I suspect a component connected to the graphics driver may be the issue.

  For example in this link , make back the graphic driver Intel seems to help.

• Tried to change the desktop image and lost all of them.

  iPhoto was opened I was looking for an image specific, but also decided that it would be a good idea to multi-task with my iMac and tried to change the image of the desktop at the same time. Apparently, it wasn't the best idea. While seeking photos through system preferences, a pop-up asked if I wanted to pass something. I'll tell you... I didn't read entirely, but thought that he wanted to reopen iPhoto in System Preferences, since I had the app open on its own. I clicked 'OK', which seems to be the point of civilization to collapse, as it appears that I lost all the photos stored in my iPhoto library! What I did and how can I fix? Everyone?

  Hold down the option key while launching iPhoto and using more select Library window select the correct iPhoto library

  If somehow you deleted it (nothing you described in your question can result in the deletion of the iPhoto library) and then restore your backup iPhoto library until you have removed

  LN