Change .txt and write to the file system

Similar Questions

• How to read the data of BLOB and save to the file system

  Hi friends.
  
  I have called DEMO table there image stored as a BLOB. now my requirement is to know how to read the data of BLOB and saved in the file system. is there a procedure
  to read the blob object and stored in the file system. pls suggest me with an example.
  Thank you

  HI - don't know what version you have, but have a read through this:

  http://www.Oracle-base.com/articles/9i/ExportBlob9i.php

  Hoek link is to import the blobs in the db, it is export, to a file.

• JSR75 - openOutputStream() and write() truncates the file

  Hi all

  I'm developing my first BlackBerry app, targeting the device 8800 (emulator 4.2).

  The Javadoc for the API for FileConnection.openOutputStream (long byteOffset): 'the data written to the stream of output returned to that position overwrites all existing data until EOF is reached, and then the additional data are added.

  Which is fine, but if the expressions of folklore is not reached, I expect the contents of the file to keep.

  When writing on a SD card, this is the case, but when writing to the device database I see all the remaining data truncated from the file.  Here's an example application to demonstrate:

  import java.io.OutputStream;
  import javax.microedition.io.Connector;
  import javax.microedition.io.file.FileConnection;
  import net.rim.device.api.system.Application;
  
  public class JSR75Test extends Application
  {
      private JSR75Test() throws Exception
      {
          super();
  
          String text1 = "This is 30 bytes worth of text";
          String text2 = "Overwrite";
  
          // File on SD card - works as expected
          // FileConnection fc = (FileConnection)Connector.open("file:///SDCard/BlackBerry/test.txt");
  
          // File on device store - does not work
          FileConnection fc = (FileConnection)Connector.open("file:///store/home/user/test.txt");
          if (!fc.exists())
              fc.create();
          fc.truncate(0);
  
          OutputStream out = fc.openOutputStream();
          out.write(text1.getBytes());
          out.close();
          System.out.println("Wrote 30 bytes of data, and file size is " + fc.fileSize());
  
          OutputStream out2 = fc.openOutputStream(0); // Re-open file at byte 0
          out2.write(text2.getBytes()); // This should overwrite 9 bytes only
          out2.close();
  
          // Device store prints "but is 9"
          // SD card prints "but is 30"
          System.out.println("Overwrote 9 bytes from position 0, file size should still be 30, but is " + fc.fileSize());
  
          fc.close();
          System.exit(0);
      }
  
      public static void main(String[] args) throws Exception
      {
          new JSR75Test();
      }
  }
  

  Is this a known bug in the API (and is there a workaround?), or did I miss something?

  Thank you very much...

  I don't know if this bug is known, but it is certainly a bug and I can reproduce it in my 4.2 Simulator. AFAICS the bug lies in the manipulation of fc.openOutputStream (0). In this case file will be treated as newly created content and old is whipped off by the first flush. On the other hand, this means that it is an ugly workaround: don't use the first byte of your files and openOutputStream (1).

• Cannot write to the file system on BlackBerry 10

  Hello

  I'm writing a text file to the filesystem on my BlackBery 10 DevAlphaB device.

  When I do, I have an onwriteerror that occur.

  {'type': "error", "bubbles": fake, "cancelBubble": false, 'voidable': fake, 'lengthComputable': false, 'loaded': 0, 'total': 0, 'target': {'Filename': "filesystem:local:///persistent/myfolder/myfile.jsonlength ',' ': 0, 'position': 0,"readyState": 2, 'result': null, 'error': {'code': 10},"onwritestart": null,"onprogress": null,"onwrite": null,"onabort": null"}}

  Error code 10 is quote outdated but the text that I'm saving<256 "bytes"="">

  Someone has an idea what I am doing wrong?

  Isn't always the way...
  You spend ages looking at something, post a question in the forum, and then find the answer yourself.

  It turns out that I had copied an old piece of code which defined the size of my file '0' space in the call to requestFileSystem.

  I changed it to 1024 * 1024, and lo-and-behold his work.

• Blob file extraction and storage in the file system

  To reduce the size of the database, I want to launch a program to run submit a page that contains a control file download, which will extract the BLOB file in Pb and store it in the operating system.
  
  Any suggestions on how I can accomplish this?

  Karthik,
  The thread of the forum is to have downloaded blob by using the browser and do not do has the server OS.

  And the second link (the only SQL) uses a library based on java called PLSQL OS COMMAND. It comes with a lot of features to fetch/modify/set file system files, run the script and return the output script and could be recommended for someone who makes those extensively. It would probably be an overdose for this purpose (and in addition need to java and grants to users and directories privileges).

• Unable to write the email in the box to the letters. Make sure the file system allows write privileges, and you have enough disk space to copy the mailbox.

  How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me

  you have an anti virus? try to turn it off.

• How to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scripts

  @

  How to get everyone how to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scriptingstyle and their policies of an indesign file and write all the info with info para in a txt file with scripts

  Hello

  Try this,

  var doc = app.activeDocument,
      pstyles = doc.allParagraphStyles,
      report = "";
  for(var i =0;i
  Kind regards
  Cognet
  		   

• Read a record of file and write to the database.

  Hello
  
  I read a file using a file adapter and write to the database using DBAdapter table. In BPEL, I used activity to receive the entry from the file and call activity to call dbadapter.in between receive and call I used activity activity of transformation of transformation.the problem is that, after deployment it.i get following error two errors:
  
  (1) no recoverable system failure:
  < bpelFault > < faultType > 0 < / faultType > < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < Summary / > < / part > < part name = "detail" > < details > error location JCA resource adapter. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then restart the application server < / details > < / part > < part name = "code" > < code > 12510 < / code > < / piece > < / bindingFault > < / bpelFault >
  
  2 non recoverable system fault):
  Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / > The JCA Binding component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the application server WebLogic or 2) the element '< jndi name >' in weblogic - ra.xml has not been set to eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
  
  Please suggest how to solve.
  
  Thank you
  
  Tejas

  Check your source data and your connection adapter db adpater deployments factory.
  Check if you have configured all steps of http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/life_cycle.htm#BABBEDBF.
  Also, in your file .jca in your jdeveloper have named the location of connection-factory as "ist/DB/draw ' if so change it to one that you have created in the db adapter deployments.

• Strain gauge: calibrate, relaxation and to write to the file

  Hello

  I'm new to labVIEW please bare with me.  My title says I'm trying to do.  I want to capture data from strain gauge using a trigger and write data to a file.  However, I also want to be able to calibrate the strain gauges.

  My attached program reads the data correctly with relaxation and stores it in a file, but it does not calibrate properly.  If I run the program several times and press the button "calibrate" each time, finally get gauges calibrated after two or three iterations.

  Is it possible to change the program so that the gauges are calibrated and then data can be triggered and written to the file?

  I'm using LabVIEW 8.6 and NI-DAQmx 8.8.

  A screenshot of the front panel is also attached.

  So I thought about it, but I'm not completely sure why it works.  I didn't remove the loop condition around the calibration block and the program works beautifully.  All I have to do is wait about 20 seconds before I hit the trigger for the calibration to be completed, and my gauges will be calibrated when I pull the trigger.

  This program works very well for this application.  However, it is difficult to change because all parameters are constant in the block diagram.

• I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

  I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

  Hello

  Run the windows Upgrade Advisor 7

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  and repost in the windows forums OK 7

  Here is the vista forums

  Windows 7 forums on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• 2 months Time Machine backup file has been changed recently and is not the old version of the file

  Good, then me Riddle this dear sweet people. I want to get an older copy of a file that was accidentally changed in recent days, according to me. I went to time machine and found that the file has been changed recently even if the backup of the States, she was saved 2 months ago. YGBFKM

  The reason for which the whole I support is to avoid this specific scenario. What is the backup if it is not the data from the date it was supposed to be archival?

  I would like to understand what has happened even as I and version current source of REAL backup software and ACTUALLY back up my data.

  Michael

  10.11.5 OS

  (21.5 inches, end of 2012)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 640M 512 MB

  * bump *.

• What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  Disconnect, and then try to connect again. Use a different cable.

• The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume D: utility.

  However, chkdsk finds no problems, so what happens?

  Checking file system on D:
  The type of the file system is NTFS.
  Volume label is A RAID.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  Cleaning of minor inconsistencies on the drive.
  Cleaning 9 unused entries index $SII of file 0x9.
  Cleaning 9 unused entries index $SDH of file 0x9.
  Cleaning unused 9 security descriptors.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)...
  File data verification completed.
  CHKDSK is verifying free space (step 5 of 5)...
  Free space verification is complete.

  244196000 KB total disk space.
  126454172 KB in 238052 files.
  109736 Ko 22501 index.
  0 KB in bad sectors.
  868124 KB in use by the system.
  65536 KB occupied by the log file.
  116763968 KB available on disk.

  4 096 bytes in each allocation unit.
  61049000 total allocation on the drive units.
  29190992 allocation units available on disk.

  He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.

  If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?).  Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.

  You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event?  Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:

  http://support.Microsoft.com/kb/246026

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  Here's how to publish events to the event to display the log files:

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• verification of the file system and the disk check

  I always thought I knew.
  But I'll have more in addition to the doubts and uncertainties.

  When is to perform the verification of the file system?
  When is to perform the disk check?

  t-4-2

  Hello

  SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
  Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
  It should be considered a first step in the effort to repair.

  How to repair the operating system and how to restore the configuration of the operating system to a previous version
  point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  System File Checker
  http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspx

  System File Checker
  http://en.Wikipedia.org/wiki/System_File_Checker

  ==================================================

  CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
  1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
  SFC is executed at any time, especially if there was any found errors.

  This explains how Vista and Windows 7 checkdisk (chkdsk)

  An explanation of CHKDSK and the new /C and /I switches
  http://support.Microsoft.com/kb/187941

  Chkdsk
  http://en.Wikipedia.org/wiki/chkdsk

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.