change windows
I've recently upgraded to vista windows to windows7.but now I want to go back to windows vista
I've recently upgraded to vista windows to windows7.but now I want to go back to windows vista
Hey fabrice
I have already answered your question in the implementation level vista install and activate forum
the link below is the answer that I gave to you
you will need to do a clean reinstall of vista
Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you still a vista recovery partition on your hard disk to reinstall vista back to factory standards
you normally have to press F10 or F11 at startup to start the process of recovery of vista, if it is still available
Ask them the exact to use keystroke
and read the information on the microsoft link to see if it applies to you re windows.old folder and disk space available below
This article describes how to manually restore a previous Windows installation on the computer to replace the current installation of Windows 7.
http://support.Microsoft.com/kb/971760/
Walter, the time zone traveller
Tags: Windows
Similar Questions
-
How can I change "window size" in the trim of 10%?
I use Firefox 32.0.3 and I need to know how to change "window size". I have a + and a - in the toolbar but it only changes the size of the window in increments of 10%. How can I get and intermediaries to increase the changes... i. e 15% or 18% or similar?
Any help will be appreciated.That's the zoom buttons enlarge and reduce the size of the content?
By default, the enlargement options:
1.1 => 110% 1.2 => 120% 1.33 => 133% 1.5 => 150% 1.7 => 170% 2 => 200% 2.4 => 240% 3 => 300%
The default mitigation measures are:
.9 => 90% .8 => 80% .67 => 67% .5 => 50% .3 => 30%
To add or change these steps, you can modify the list in Firefox about: config preferences editor. Here's how:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search box that appears above the list, type or paste the zoom and make a break while the list is filtered
(3) double-click the preference toolkit.zoomManager.zoomValues and edit it as you wish. Since it's a little difficult to read, you can copy it to a word processor or another program where you can zoom text, modify it, and then copy the revised version.
Note #1: After having OK'ing this change, it will come into force in any new windows that you open. Existing windows/tabs seem to remember the implementation at the time you opened the. (To move a tab into a new window, click on the tab on the tab bar > move to the new window.)
#2 Note: If the preference becomes a mess, you can right click > reset to restore the default value.
-
Generation of recovery media after changing Windows 8 for Windows 8.1
How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.
Hi @john_f_g ,
Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.
Software recovery of HP and Microsoft allows you to make only a backup recovery.
You can order new media disc or USB flash device of here.
Thank you.
-
NUANCE has a software called "SOFTWARE MANAGER". Please change windows XP Professional and VISTA to list this software in the Remove Programs list. I can't remove it cause it used to list and it is full of ups popp. So boring.
Otherwise, keep up the good work microsoft.
Concerning
GaryHi Gary,.
We will try to uninstall this software by using Microsoft fix - it Manager.
Refer to this link:
Solve problems with programs that cannot be installed or uninstalledhttp://support.Microsoft.com/mats/program_install_and_uninstall
Also perform a virus scan full assistance Security Microsoft scanner.
See this link for download:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
After completing the methods suggested above, answer us with the State of the question.
-
possibilities to change Windows 7 windows 8 from HP 650 someone advise on how to do
Can someone help me how do to change Windows 8 and return to Windows 7 and how to appreciate any help or advice thank you.
(call 07886413762 0r)
Hello:
I do not understand your question.
This is the page for support and drivers for your laptop.
You will find all the drivers for Windows 7, you need it.
http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=5225013
If your laptop comes with Windows 8, you must change a setting in the BIOS to be able to install and run windows 7.
-
In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security. I understand what its about, but have no idea how or what to do about it. Help!
http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4
According to this site, no user action is required.
I don't know why you receive this error message, but apparently is not a problem.
http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx
the above site is a very detailed description of the error.
-
How to change Windows XP registration?
I HAVE SECOND HAND DELL INSPIRON 1300 HOW DO WE CHANGE WINDOWS XP UNDER PREFORMANCE AND MAINTENCE, SYSTEM REGESTRATION
Original title: I CHANGE REGESTRATION UNDER PROPERTYS WINDOWS XP SYSTEM
Hello AnneMarshall Robinson,
See this link from my Web site: http://www.winuser.co.uk/17_change_registered_owner.aspx
The page refers to windows 7, but it also applies to the visat and xp.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
How do I change Windows Live Mail to get mail in HTML?
How do I change Windows Live Mail to get mail in HTML?
Hello
The question you posted would be better suited in Windows Live Mail forums. View the query in instances of Windows Live Mail for better assistance.Hope this information helps.
-
I change windows 2000 to xp windoms and how
can I change windows 2000 to windows xp and how
The upgrade to Windows XP Pro in Windows NT/2000
http://www.winsupersite.com/article/product-review/upgrading-to-Windows-XP-Pro-from-Windows-NT2000.aspxNever be afraid to ask. This forum has some of the best people in the world to help.
-
How to change Windows Photo Gallery to be default for images of the camera?
Can someone tell me please how to change windows photo gallery to be the default program for my camera. Also, if I delete pictures in the gallery it also removes that I put in a separate folder.
Help. Thank you
Hello
These could work and be sure to check with the manufacturer of the camera for other options.
Use another program like the default binding for the types of files instead of the Windows Photo Gallery.
That Picasa support associations or assign to it.
Picasa - free
http://Picasa.Google.com/Or
Install Irfanview and do take care associations:
IrfanView - free - download plugins too
http://www.IrfanView.com/Or:
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.htmlIf necessary:
How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
How can I change windows to open maximized?
original title: vista edition Windows Home premium 64
How can we change windows to open enlarged.
You don't say which program.
http://www.theeldergeek.com/maximize_internet_explorer.htm
Read the above info.
See you soon.
Mick Murphy - Microsoft partner
-
How can I change windows 7 back to the original appearance of the classic?
How can I change windows 7 back to the original appearance of the classic?
Hello
I see what you mean - try the following.
Open windows control panel, open ease of access Center and click on make the mouse easier to use. In the next window, under the heading "Make it easier to manage windows", uncheck the box "Activate a window by hovering over it with the mouse", then click apply and then click Ok.
Kind regards
DP - K
-
lost my product key after changing windows
Sorry for my weak English
I bought the laptop lenovo 4 years ago and it came with windows 7 home premium active product key on udersurface I changed windows e so many times, but now I want to return to my original copy but off coarse product key lost
what I could do to get him back
can someone help me
Your best option is to ask the Lenovo recovery media if the recovery partition does not work:
http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3
Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.
or
Lenovo/IBM
http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html
1-800-426-7378
-
change windows loggon password 7
I went to the typed microsoft change windows password button and it says hit ctrl alt del as in xp and I have to click on change password.
but there is no possibility to change the password only
locking the computer
change user
closure of session
Task Manager
where is the password change option?
Try this: control panel / user accounts / change your password. Most, if not all things can be configured or modified via the control panel.
-
Error "Change Windows settings" when trying to access the installed program Pastel 11
Original title: can not enter in the program that I installed
I installed the version 11 of pastel and all succeeded but now I'm trying to enter pastel it is said to change windows settings. How do I do that?
Try to reinstall by using compatibility mode.
See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.
Windows 7 Compatibility Center
Check if your application software or hardware is on the list
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Software:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software
You can also try to run the program in compatibility mode
You can find more information on compatibility modes in the articles below:
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question
The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:
Run in Windows XP Mode requires:
(1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).
Windows XP Mode and Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/default.aspx
Windows XP Mode now accessible to more than PC
Get started with Windows Virtual PC
http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx
http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/
Windows 7 - upgrade Express features:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade
-
my computer has vista, how it can change window 7
response of Vista how do to change window 7 low
augustine52 wrote: response of vista how to change window 7 low
Hello augustine52, if your system comes with Vista, you should be able to upgrade to Windows 7. I would like all first download and run the Windows 7 Upgrade Advisor, which can be found here .
It will scan your system and determine if there are any problems that might prevent you from upgrading to Windows 7.
It will also determine if you have Vista x 86 (32-bit) or x 64 (64-bit). If your Vista system is the x 86 version and you wanted to move to the x 64 version, you would be required to perform a new installation of the x 64 version, while you might switch to the x 86 Vista to Windows 7 x 86.
If there are no problems that could prevent you from upgrading to Windows 7, you should be able to acquire either a Windows 7 upgrade version or a full version of Windows 7 retail.
Maybe you are looking for
-
I need regularly correspond by e-mail with members of a club, that I belong. I would like to keep their addresses in a separate account that do not clutter my personal e-mail address. Is this possible and if so, please provide advice on how to implem
-
Impossible to duplicate to external hard drive using the CCC
Hi all I wanted to make a clone of my HD, because it started acting weird lately and decided not to make a clone of it when I get a new HD, but when I use ccc I select my boot drive (the one doubtful), then my drive external usb (2 TB) as my destinat
-
Need new inverter for my Qosmio G50-129
HelloI have a laptop Toshiba Qosmio G50-129 and had trouble with the screen flickering and then going black. I guess it's a defective LCD inverter, but I can't find my type of model (G71C0007Y210) anywhere on the internet. The closest I can get is th
-
I'm in labview 7.1. I have a tab control, and within this tab control, I have two tabs, each with 4 digital controls. When the user presses the tab key, I want to change the indicator to move left right among the 4 visible controls and instead moving
-
Have updated the Ati driver but it crashes: On Fri, 2011-08-19 14:26:57 GMT is crushed by your computercrash dump file: C:\WINDOWS\Minidump\Mini081911-02.dmpThis was probably caused by the following module: unknown (0x003C003E)Bug check code: 0x10000