Changed networking, now I can't connect!
I was trying to set up a computer network at home on my work laptop (while I was at home), so that I could share files between two computers. If I remember correctly, the last thing I tried to do was one of the wizzards of network configuration. I changed something the task force, to home network... and then I had to restart.
I had a similar problem. I could not open a session from one computer to another on the same home network. Windows says that my ID or my password is incorrect. I tried all my ID login and passwords. Finally I discovered that my login id was my email account...
Tags: Windows
Similar Questions
-
Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;
SE connect-VIServer esxihostname-user root - password newpasswd
This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain
y at - it something I have left out. I really appreciate any assistance that you people can provide.
Thank you, Joe
It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is. I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something. If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).
Edit:
Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it. In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access. After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access. I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.
-
I installed a new OS and now I have no wireless on the list of the network. I can't connect to my pro overdrive unless it is attached. Is there a download I need?
Download wireless network drivers
Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions.
If you cannot access to the use of the internet, another computer and save the driver on a CD/DVD/card reader.
-
original title: Wireless help network device
Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.
Have you installed all of the correct drivers?
-
am getting only a few wifi I do not receive my freewifi company, I was gettig 2 days before now I can't connect, but my roommate can connect
Hi Vijay,
1. have you made changes on the computer before this problem?
2. you receive an error message or error code?
This problem can occur because network settings, refer to the steps in the following Microsoft article and check.
How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702
Manage your network connections: http://windows.microsoft.com/en-in/windows-xp/help/networking/manage-network-connections
To set up automatic wireless network configuration: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true
Hope that the information provided is useful.
-
I installed a copy of XP - now I can't connect to the internet.
We have just received a new laptop, so we moved things around.
We had a desktop computer that was under Windows 2000. We also have a lptop that is provided with Windows XP. I just installed XP on the desktop - now I can't connect to any site on the internet. The 3 are connected using Network Magic to manage the network
The resolution of the screen on the desktop is also off now. I don't get the 4 colors of the Windows symbol & the background is distorted.
I can solve this mess?
Hi GinaQQ,
Follow the suggestions below for a possible solution:
Method 1: You can follow the steps in the article mentioned below.
Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band
http://support.Microsoft.com/kb/307164
Method 2: Also, try to reset the TCP/IP Protocol and check the results.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
You can also view the article mentioned below for more information about the screen resolution:
To change your screen resolution
Let us know if that helps.
-
I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.
original title: can't get onlineHello BurnBurn,
I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install: -
I deleted my dial-up access and now I can't connect to internet
I have removed my dial-up access
I deleted my dial-up access and now I can't connect to the internet, how can I get that back
Hello
1. how exactly did you remove the dial-up access?
Method 1:
If you have removed the dial from the network and sharing Center, then it should be detected automatically once you restart the computer.
You can also check the link provided below for more information on the implementation of an incoming VPN or dial-up connection
Set up an incoming VPN or dial-up connection
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-an-incoming-VPN-or-dial-up-connectionMethod 2:
Perform the system restore. You can restore the computer to a date and time when there are no problems with dial-up access.
Click on the link provided below for more information on restoring the system.
What is system restore?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreSystem Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions -
Omen 870-003na: updated HP installed updates and now I can't connect using Ethernet or wi - if
Update ran today and installed HP HP sure Connect, Realtek Audio Driver Realtek card reader
Now, I can't connect using Ethernet or Wi - if but my iPad will connect using the same wi - if network.
help, please
OK, well I have now established (by means of uninstalling all the software that has been updated to 12, one piece at a time) that the culprit was Cyberlink Power Media Player 14.
After removing that, all right (and Yes, I created a restore point).
-
I have windows xp home edition and I had Silverlight to send photos to my hotmail account, something has changed and now I can't use it and I can not download
Hello
Given that the problem is related to Silverlight, I suggest you post this question in the Microsoft Silverlight forum.
http://forums.Silverlight.NET/forums/
listed below or in the Hotmail forum.
http://windowslivehelp.com/product.aspx?ProductID=1 -
Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.
What version of vCenter Server do you run? Only of vCenter Server 5.0 Update 2 is currently supported on Windows 2012.
André
-
I had a change in router and now I can not connect wireless network printer
HP Deskjet 3050 has
Windows 7
I got a router change and now can not conect my printer on the wireless network. What should I do?
Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031
All the best.
-
I changed the name of the computer, now I can not connect to Oracle SQL Developer
Hello my friends!
Everything worked perfectly until I needed to change the name of the computer and now I can no longer connect in Oracle SQL Developer 3.1.
I restarted Oracle 11 g by stopping and restarting. The order message said stop and start successfully. This tells me Oracle 11 g Express is running, but I can no longer
connect to Oracle SQL Developer 3.1.
How can I fix?
Thank you all!J man,
I'm not a pro at Oracle XE, but I would say that this is not a problem of SQL * Developer, but the listener of OracleXE.
Now, I'm in total guessing game mode:
find the "listener.ora" file in your Oracle installation (from [url http://docs.oracle.com/cd/E17781_01/server.112/e18804/network.htm#ADMQS168] this document is c:\oraclexe\app\oracle\product\11.2.0\server\NETWORK\ADMIN\listener.ora
I'm sure that it is coded in the old hostname, simply replace it with the new host name.
Restart your receiver and please try to connect again.HTH,
Berx -
Updated NIC now I can't connect to vSphere
I have a system with ESXi installed 5.x, I made changes to NICs because for some reason they were only running in half duplex mode for some reason any. The card has been set to Auto and I forced it 100 Full and then I lost the connection to vSphere. I now can not connect to vSphere because it was networking... What can I do now? Im not too experienced with ESXi so Im at a loss.
TIA
Hi AmDD,
Great that you have access KVM! You can do the following to get management on your ESXi rogue server:
- Press
and then logon with 'Root' and password - Select Troubleshooting Options in the customization of the system screen
- Press
to enable the ESXi environment so that it displays ESXi Shell is selected in the right pane - Press
to the local shell - 'Root' login and password
At this point, you should have a shell with ~ # on the screen and a cursor blinking on ready for the entry. If this is the case then continue
- Run network vswitch standard list esxcli (assumes that you use a standard vSwitch and not a distributed vSwitch)
- Note uplink associated with this vSwitch (read the physical network adapters)
- Run network nic set-n vmnic5 - esxcli has
- Repeat for all the vmnic related delinquency vSwitch
Once you have confirmed you have taken over the management of the perpetrator, then you can store as follows:
- Press
to return to the DCUI - Follow steps 1-3 in the first section, but make sure that esxi Shell is disabled
- Press
can again to disconnect from the DCUI - Grab a cold beverage of your choice and sit back to relax
Note: This is not strictly necessary but does not remove the fingerprints
Let us know if it works!
- Press
-
I did a system restore and now I can not connect. Error code oxc004e002.
I ran the restoration of the system and now unable to connect. Error code oxc004e002 AAn arrives. McAfee also keeps poping up saying that I am not protected
Hi Rita Morgan,.
1. on what application you can not connect?
2. When you mention "sign in" mean, you are not able to boot to the desktop?
3. have you updated your McAfee security software?
Make sure that it is not expired and updated your McAfee software up-to-date.
Follow the steps below and check, if it helps.
Step 1:
Start your computer in safe mode with network and check if that helps to connect.
Step 2:
This problem can also be caused by a malware, I you have to perform a full scan in safe mode with network in order to remove the malicious software and since then, your McAfee does not protect your machine, I would have you to run a scan using the link below.
http://OneCare.live.com/site/en-us/default.htm
In addition, check out the link below and check if it is related to your issue.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Maybe you are looking for
-
Outlook crashes each time I have send an email
My Microsoft Outlook crashes whenever I send a mail! I have updated my office 365 and updated my Mac OS, but I still have the same question. Thanks for your response
-
tried to connect but my password does not work so sent a request for password recovery, but still have not received the email I am VERY upset - I used the two Thunderbird & FireFox12-15 years - I totally uncomfortable having to change my password aft
-
Delete empty homescreens in launcher / JB 4.3 on excite Pure
Enjoying excite him pure, we opened for Christmas. I have a lot of empty home screens, but can not find a way to remove them. Any ideas? JB 4.2 running. Also - the Pure will get JB 4.3 anytime soon?
-
Where to find Lenovo power/energy management?
Yesterday, my new Y500 reminded me that I can extend my life of the battery by unloading it partially. Then I looked for the energy management program to do that and can't find it on the computer! I then downloaded from Lenovo and installed it, but s