Changes to a copy of the tracks also appear on the original.

Similar Questions

• Cannot associate the copy of the original file

  I have a lot of files that I created by making a copy of the original and modify.  I have the original file with no edit history.  The copy which shows the results of the edition is marked as a missing file and the change history is grayed out. The two files share the same name, except that one is a copy.  Is it possible to add a link to these files?  When I try to look for the missing file, and then point to the original, it says that the file is already linked to a file and cannot be linked to a second file. Any ideas or suggestions would be accepted with gratitude.

  Thank you for your ideas.

  Missing files must be reconnected via this procedure: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  After that, you can 'link' the original and copy via stacking in Lightroom (as long as they are in the same folder)

  There is no need in Lightroom to make copies first before editing. Lightroom editing is completely non-destructive and your original pixels are never changed in the file of the original photo.

• Satellite Pro L10: Is it possible to get a copy of the original installation discs

  Hi I'm new to the forum.

  Is it possible to get a copy of the original installation for my laptop Toshiba Satellite Pro L10 diskettes?

  Concerning
  Anno2

  Hello

  Of course, it of possible to get the Toshiba Recovery CD!
  You can order it from the service provider authorized in your country!
  Simply call the guys and order! It shouldn't be very expensive!

• How can I change windows 7 back to the original appearance of the classic?

  How can I change windows 7 back to the original appearance of the classic?

  Hello

  I see what you mean - try the following.

  Open windows control panel, open ease of access Center and click on make the mouse easier to use.  In the next window, under the heading "Make it easier to manage windows", uncheck the box "Activate a window by hovering over it with the mouse", then click apply and then click Ok.

  Kind regards

  DP - K

• How can I make a second copy so I can make some changes, but not to lose the original document?

  How can I make a copy of my new convert pdf word document without losing the original document?

  Hi mariponce,

  Please see my reply to your post duplicate on this topic: How can I make a second copy so I can make some changes, but lose the original document?

  Best,

  Sara

• You can grab a copy of the Original Microsoft operating system?

  HI: My Dell Dimension 3000 had Windows XP Home on my hard drive and it destroys itself.  I bought a new hard drive and he would reinstall from the restore disc.  Unfortunately as it was for many years the restoration dischas moved.  I still have the COA on the side of the machine.  I was wondering if there was a way to get a copy of the Microsoft operating system.  Dell is not any help at all, and "You can call me Bob," says hes sorry I have problems, but this computer is no longer supported.  If I was filthy rich instead of being on disability, I got a new computer.  Thanks for any help.

  Please see: How to request a backup Dell drive

• 700 - 215XT envy: copy of the original OS

  The machine is a HP Envy 700-215XT bought mid-2014. The machine is completely dead from one day to the next. It wouldn't boot. Not knowing much about HP, I advanced and formatted the HARD drive and installed a fresh copy of Windows 7 Pro x 64. The installation went well, but as it is not the exact copy supplied with the machine, I can not install any drivers. I can also not boot in using F11 recovery tool.

  I am trying to find a way to restore the computer to its original state. Is it possible to get a copy of Windows from HP with the sticker of the product key on the machine?

  Is there another approach, that I need to try?

  Thank you in advance!

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• Ease of access has changed. He returned to the original need settings

  I have changed several things to ease of access in my control panel.  I went back and unchecked the boxes, but now I have a black and white screen and no sound.  Tried to do a system restore and it says not enough memory.  Help, please!

  Try the procedure described by the bottom
  http://www.onlinecomputertips.com/tutorials/vista_accessibility.html

• I've accidentally changed all my.lnk files to open with Windows Photo Gallery. Is there a way I can change all my shortcuts in the original applications out there without doing it manually?

  I tried system restore three times and all three of them didn't work, I get an error message after the restore has been saying that there is an error during the restoration that has not left my files be returned in original condition here. I really need help with that.

  Please and thank you.

  Hello

  The simplest method is to use restoring the system to a point before you did.

  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  =================================================

  Reset the lnk - files shortcut link (LNK).

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Keep only 1 copy of the original doc

  Hi all
  
  I use ecm11g, when I check in a doc in ecm, this doc will be saved under vault directory weblayout, it wastes space on my drive, I can configure ecm to save only 1 copy?
  
  Best regards

  Hello

  Yes, you can do this by using the file store provider component. With the component, you can set up the content checking in need to be based on files with Webless type which means that content will be only placed in the directory of the vault and not Weblayout.

  Additional documentation is available on the otn.oracle.com of the Complutense University of MADRID - the system administrator's Guide.

  I hope this helps.

  Thank you
  Srinath

• I need a copy of the original Setup for my windows 7 x 64 pavilion HPE-270e disk

  Anyone know where I can buy an original operating system disk provided with my computer?

  Please see Windows 7 64 b A1NAv6PrA1 + Supp 7 Recovery Kit to buy HP recovery media for your desktop HP Pavilion Elite HPE-270e.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Replace the original audio track

  I imported a movie like asset for Premiere Pro and created clips in a sequence of it. Several parts of the original film are in different places on the timeline, they are trimmed etc...

  When the video is almost over, I realized that the original contained in the original film audio is incorrect and I replace it with another audio file, which is of length the same and already imported into the project. But I don't see an option to replace the audio source to an audio track.

  I know it is possible to break the link video and audio, but this does not solve the problem. Then right click on a single item (after having to separate, it's only an audio track of a clip) in the timeline and choosing Properties, path that points to the original movie file. I would change the file path so that it points to my new current audio file.

  Is it possible to do more than to remove all existing audio tracks in the timeline and create them from the beginning, using the new audio asset as a source and do it manually any changes that were made to the original video?

  Well, you'll have to do the hard

  After you import your audio track of replacement, load it in the Source monitor. Then, by pressing the Alt + Shift key, drag the audio to one of your instances of clip with the sound 'bad '. Audio of the movie clip instance will be replaced (it's done Alt), and it will retain the same point (what's Shift). You will need to do this for each instance of a clip in the timeline; Unfortunately, you can not select them all and it in one pass - points in are not met then.

  The easy way would be to get a new copy of your original movie with replacement audio multiplex. All you have to do is then right click on the item in the project Panel, select replace sequences and navigate to the new replacement clip. The original main item will be replaced, and this will be running continuous down to all instances of the clip in the sequence of your project. If you can multiplex the original video with the audio again, it's the way to go (especially for a complicated editing); However, you said that you are using the video "m4u" (which I assume you meant "m4v") so this creates a little more difficult.

• How can I copy some object without it being related to the original?

  When I copy a pushbutton to Lookout 5.1 it is linked to the original.  If I change the name of the newly pasted key (or any other property) it changes it and the original object.

  How to create a pasted object that has the same properties as the original without the 2 related?  Or how to break the link?

  If you select a displayed object, then do a copy & paste (ctrl + c ctrl + v, copy & paste in the menu drop-down change or hold down the SHIFT key & drag) you make a copy of the original object.  If you want a new object created, select the display object and press ctrl (not updated) & drag.  Or use Object Explorer when ctrl + c ctrl + v or right click contextual menu to create new objects, but not display.

• Copy of the device. I want to get the pistures of him out of it to share with friends... and fam is there a way I can do this?

  I got a slideshow of my preschool son and I want to get the pistures of him out of it to share with friends... and fam is there a way I can do this?

  You can use copy and paste.  Help Windows 7 & support:

  Copy and paste a file

  When you copy and paste a file, you make a copy of the original file that you can then modify independently of the original file. If you copy and paste a file to a different location on your computer, it's a good idea to give it a different name, so that you'll remember which file is new and which file is the original.

  To copy and paste a file:

  1. Open the location that contains the file you want to copy.

  2. Right click on the file and then click on copy.

  3. Open the location where you want to store the copy.

  4. Right-click on an empty space within the location and then click on paste. The copy of the original file is now stored in the new location.

  For more information about copying multiple files, see select multiple files or folders.

  Tips

  • Another way to copy and paste files is to use the keyboard shortcuts Ctrl + C (copy) and Ctrl + V (paste).

  • You can also press on and hold the right mouse button and drag the file to the new location. When you release the mouse button, click on copy here.

  • You can copy and paste a folder in the same way as you would a file. When you do this, all the files in the folder are also copied.

  -

  Good luck.

• Smart objects - copy without referencing the Original SO?

  A question from me

  If I copy a raster layer several times for an animation to image, then it makes sense to do than the smart object layer.  What I do, but I'm missing something.  For example, there is a video going around on photo blogs today, a lady in charge by an elk, but missed the guy with the iPhone, so I quickly put together.

  

  The video has been radically challenged in the Department of pixel, so I made the Lady layer one OC and formulated a number of copies.  Same thing with the Elk (from a different source), where I used Puppet Warp to simulate a bucking motion.  In both cases, Free transforming the PW YES, or using copied, caused the original SO layer to reflect the changes.  Not good at all. And it's something that's happened to me before.

  Then a little later, Google I found this old threadand tried his advice to slide SO the layer to the new icon of layer instead of using Ctrl j.  But that's where it weird, because now I could use Ctrl j and PW as before and modify a copied SO layer without affecting the original.

  Someone has a good understanding of why my SOs don't always work in the same way for me?  I guess I should man to the top and RTFM, but I was using what I thought exactly the same workflow in different documents and get different behavior.

  Working with smart objects in Photoshop

  I don't see this problem in PS CC 2015 (Mac) with copy/duplicate methods. Are you sure that you not open the parent (SO) and the transformation (Puppet Warp or free transform) running on the child (content)?

  Application of puppets Warp to a smart object layer apply PW as a dynamic filter that is only attached to this layer (you will see in the layers), and if none of the other layers will be affected by PW. But if you run PW on duplicate content, clicking on a smart object to see the child record, then all layers will be affected.

  Looks like you know what you're doing, but the PW behavior as a dynamic filter is specifically designed for the layer that the smart filter is applied.

  Steve