Similar Questions

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• Officjet 7610: Scanner not recognized

  I just bought this printer and used the HP software to install on a wireless network. The printer is recognized and installed, but the scan option is not recognized.

  I deleted the drivers printer and reinstalled but no change.

  I applied the suggestions on the forum and still no scanner. Apple and HP printer list shows that noth printing and scanning is supported for the wireless.

  The same thing has happened now with our Officejet 7500 a

  Please can you advise.

  Hi @Norman_S

  Thanks for the reply.

  Yes, it looks like there is a network problem or a problem with the printer.

  When you reset the settings and reconfigured the wireless. That's happened?

  • You are connected the printer wireless?
  • You update the firmware?

  When you bypassed the router using HP direct, what happened?
  If the printer was able to connect wirelessly, there is a problem with the wireless network settings.

  Tips for successful network configurations:

  • Using a unique network name (SSID).
  • Avoid using filtering by Mac address of the router.
  • Make sure you have 802.11 g active.
  • HP recommends a WPA and WPA2 encryption.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz and 5.0 GHz network names are not the same. Rename the 5.0 GHz network.
  • Don't hide your SSID (network name).
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • Do not use a network of comments (SSID).
  • Disable the WPS.
  • Disable UPnP on the router.
  • Set the router to 20 Mhz only, or 145Mbps depending on the router.
  • What router do you have? Verify that the router has the latest firmware on the manufacturers website.
  • If you have a Mac OS X running 10.8 or earlier, click here to locate and download the update of the firmware.
  • If you have access to a computer running 8.1 Windows or an earlier version, click here to locate and download the update of the firmware.

  Please reply to this message with the results.

• Canon Vixia HV40 HD camcorder not recognized on IEEE1394

  Windows 7 does not recognize the camcorder HD on IEEE1394 (= Canon Vixia HV40 camcorder. It is compatible Windows 7)

  Camcorder Canon Vixia HV40 =. It's Windows 7 compatible according to the Canon website -http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=17996

  IEEE1394 card was not recognized initially by Windows 7, so returned to the "legacy" driver, then the card was regognized

  But the camcorder is not recognized

  Camcorder is recognized on another computer running Windows XP with * same * map out and installed on this computer XP IEEE1394)

  Windows 7 Home Edition

  The same camcorder is also not recognized when connected to Windows 7 via USB

  Use the USB port... connection... Your camcorder is MPEG-2 MPEG-2... is a DVD Format ================ USB terminal ================	NO - a son of the late connection... NON - DV, mpeg2 is already a compressed file. DV - is called the great Fame(un-compressed)... This is the best EDITING-format/1080 p is just as good. ===================== USB 2.0 Full Speed---> > Firewire ((NOT)) ================
  Video Terminal	component (output), composite (output)
  Audio =.	DV: 16-bit (2ch) 48-bit 12 kHz (4 channels) 32 kHz 4ch synchronous recording HDV is not possible: MPEG1 Audio Layer II (2 ch) (4 channels playback of cassettes containing recordings of 4 possible channels) ())-->> these would require the CANNON... cables of product...
  Hot shoe	Advanced
  Supplied video editing software ==============	None ======================
  HDMI Jack ((This looks like a reading of TV output)) ==============	HDMI Type A connector (output) (19 pins) ======================
  Microphone Terminal	stereo 3.5 mm mini-plug
  AV Mini helmet/Terminal Terminal	4 pole mini jack 3.5 (video/audio, entry and exit)
  Dimensions	(W X H X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138 mm)
  Weight (not including lens and battery)	1.2 lbs (535g)
  Weight	1.4 lb (615 g)

  MSM-2010

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Audio clips mp4 not recognized after upgrade to CC 2015.1

  Just upgraded to CC 2015.1 on a Windows 7 Pro workstation. A former CC 2015 project file opened yesterday, received an error message about missing a missing MultibandCompressorCore.dll, saved as CC 2015_1, did a few editig, seems ok, and smooth. But today many clips are offline, when I repeat the tracks audio and audio clips are not recognized (screenshot). When I simply import the clips of same, there is also no audio what either is. When I check under change clip audio channels are grayed out. When I play the clips via Quicktime or Windows Media Player all sounds is there. I'm lost in the darkness, silence, please help.

  

  

  Exact same file on another workstation (with the same characteristics). One with and one without sound? Import the same video in After Effects and Audion works like a charm, the fable is there. What I'm missing here? A first adjustment?

  

  I had the same problem. What I've done. 1 / I chose all mp4 files in Windows Explorer. 2 / I created a new folder very close to the original (s) 3 / I moved the clips (without the cfa and so on...) for the new records. 4 / premiere Pro will be automatically "relocate" the missing clips when you reopen the project. And now, they have audio too. I hope this will help.

  Best regards

• Hard drives not recognized on Precision 650

  Hello

  I have a Dell Precision Workstation 650 2003 System. I have 4 hard drives of 250 GB on in more the 40 GB boot drive. Of data readers were on the secondary IDE channel, while the other two were on a PCI - IDE card.

  Recently, I decided to upgrade all drives in my system. For my boot drive, I have upgraded to a Seagate Barracuda 7200.10 ST380215A HDD 80 GB 7200 RPM IDE Ultra ATA100. For my data drives, I went with 4 ST3750640A of Seagate Barracuda 7200.10 750 GB 7200 RPM Ultra ATA100 IDE drives.

  After having replaced the drives, I was able to install CentOS Linux 5.1 on the 80 GB boot drive. I also could see the 750 GB drives attached to the PCI - IDE card. However, the 750 GB drives connected to the secondary IDE channel are not recognized by the BIOS or the operating system.

  I tried the following command to get the discs to work:

  (i) update of the BIOS on the workstation to version A05. It is the latest version of the BIOS available from Dell for my system.

  (II) new IDE cables are used for the secondary IDE channel.

  (III) tried all four disks to see if any combination works.

  (IV) tried to put just a walk on the secondary channel.

  (v) tried "cable select" setting the jumpers on the drives.

  (VI) configuration of the riders ' master/slave' I tried on disks.

  (VII) tried other riders to Seagate where you put an extra jumper on two pins closest feeding on both drives.

  (VIII) tried erasing memory NVRAM using keystrokes - Alt + F, Alt + E, and then Alt + B. After reboot, the system performed the automatic IDE configuration, but couldn't detect the 750 GB drives.

  (IX) tried the IDE cable that I use for the PCI card, which is able to detect the discs correctly.

  (x) tried to connect the drives on the primary IDE channel.

  None of these things have worked. I don't want to go back to the 250 GB drives because I want more storage. Y at - it a trick of hardware/software/firmware that I missed? Is there a way I can use the 750 GB drives on my system?

  Thank you

  Saurabh

  
  

• java.io.IOException: schema of Transport NOT recognized: [tcp]

  Hi all, I have developed a Java class that allow me to connect, create, send and receive information to an ActiveMQ queues.
  However, when I loaded this java class Oracle 11 GR 2 (11.2), the java class has failed error message (its status is active and without errors. Is the output I got in SqlDeveloper
  
  * java.io.IOException: schema of Transport NOT recognized: [tcp]. * When I called this Jdeveloper 11g Java class it worked but PL/SQL does not.
  
  This is the Java class, I've been using
  
  
  
  Import javax.jms.JMSException;
  Javax.jms import. *;
  
  to import javax.naming.Context;
  Import javax.naming.InitialContext;
  Import javax.naming.NamingException;
  
  Import org.apache.activemq.ActiveMQConnectionFactory.
  
  
  public class ActiveMQRequest {
  URL of the JMS server. DEFAULT_BROKER_URL will just mean
  This JMS server is on localhost
  
  Name of the queue, that send messages
  private static String destMameReq = "QueueIN"; request
  private static String destNameResp = "QueueOUT"; response
  
  
  
  public static String Request (String urlMQ,
  String destNameReq,
  String destNameResp,
  OperationType string,
  String XMLmessage) throws JMSException {}
  int JMSDeliveryMode = 2; for PERMANENT
  ConnectionFactory Factory = null;
  Context jndiContext = null;
  Queue destRequ = null;
  Queue destResp = null;
  QueueSession session = null;
  QueueConnection connection = null;
  String messageID = null;
  QueueReceiver queueReceiver = null;
  QueueSender queueSender = null;
  String replyString = null;
  Traded Boolean = false;
  TextMessage outMessage = null;
  
  try {}
  jndiContext = new world;
  } catch (NamingException e) {}
  System.out.println ("could not create JNDI API context:" + try ());
  System.Exit (1);
  return "error: failure of Initial context."
  }
  
  try {}
  connectionFactory = new ActiveMQConnectionFactory (urlMQ);
  
  connectionFactory = jndiContext.lookup ("connectionFactory") (Factory);
  destRequ = jndiContext.lookup (destNameReq) (tail); Queue the request
  destResp = jndiContext.lookup (destNameResp) (tail); Response queue
  } catch (Exception e) {}
  System.out.println ("JNDI API lookup failed:" + try ());
  System.Exit (1);
  return "error: factory of MqConnection failed:"+ try (); ".
  }
  
  Start
  try {}
  connection = connectionFactory.createQueueConnection ();
  Connection.Start ();
  
  
  } catch (JMSException ycsms) {}
  System.out.println ("error: JMS Exception occurred:" + jmse.toString ());
  return "error: JMS Exception occurred to create a queue of connection:"+ jmse.toString ();.
  } catch (Exception e) {}
  System.out.println ("JNDI API lookup failed:" + try ());
  e.printStackTrace ();
  return "error search: JNDI API could not create Connectio queue:"+ try (); ".
  
  }
  try {}
  session = connection.createQueueSession (transacted, Session.AUTO_ACKNOWLEDGE);
  Check this box to instead of using JNDI
  destRequ = session.createQueue (destNameReq);
  destResp = session.createQueue (destNameResp);
  } catch (JMSException ycsms) {}
  System.out.println ("error: JMS Exception occurred:" + jmse.toString ());
  return "error: JMS Exception occurred createQueueSession:"+ jmse.toString ();.
  } catch (Exception e) {}
  System.out.println ("JNDI API lookup failed:" + try ());
  e.printStackTrace ();
  return "error search: JNDI API has no createQueueSession:"+ try (); ".
  
  }
  ///
  try {}
  queueSender = session.createSender (destRequ);
  outMessage = session.createTextMessage (XMLmessage);
  Sets other properties of the message
  outMessage.setJMSPriority (7);
  outMessage.setJMSReplyTo (destResp);
  outMessage.setJMSDeliveryMode (JMSDeliveryMode);
  outMessage.setJMSType ("Interval"); Interval of
  outMessage.setJMSType (OperationType); ODR, meantime, Ping
  System.out.println ("sending message.:" + outMessage.getText ());
  } catch (JMSException ycsms) {}
  System.out.println ("error: JMS Exception occurred:" + jmse.toString ());
  return "error: JMS Exception occurred createSender:"+ jmse.toString ();.
  } catch (Exception e) {}
  System.out.println ("JNDI API lookup failed:" + try ());
  e.printStackTrace ();
  return "error search: JNDI API failed: createSender"+ try (); ".
  
  }
  Here, we send the message!
  try {}
  queueSender.send (outMessage);
  
  
  System.out.println ("sent... Message:" + outMessage.getText () + "'");
  
  Receiving
  
  messageID = outMessage.getJMSMessageID ();
  
  
  Channel selector = "JMSCorrelationID = '" + messageID + ' "';
  System.out.println ("JMSCorrelationID = '" + messageID + "'");
  queueReceiver = session.createReceiver (destResp, selector);
  
  System.out.println ("received Message.");
  Message inMessage = queueReceiver.receive (2000);
  
  
  If (inMessage instanceof TextMessage) {}
  replyString = (inMessage) .getText ((text));
  System.out.println ("message:" + replyString + "'");
  }
  on the other
  replyString = "error: text is empty";
  } catch (JMSException ycsms) {}
  System.out.println ("error: JMS Exception occurred:" + jmse.toString ());
  return "error: JMS Exception occurred received:"+ jmse.toString ();.
  } catch (Exception e) {}
  System.out.println ("JNDI API lookup failed:" + try ());
  e.printStackTrace ();
  return "error search: JNDI API could not receive:"+ try (); ".
  
  } {Finally
  queueReceiver.close ();
  queueSender.close ();
  session. Close();
  Connection.Close;
  }
  Return replyString;
  }
  }
  
  
  This is encapsulation of pl/sql of th
  
  create or replace
  function ActiveMQRequest (url in varchar2,
  destNameReq in varchar2,
  destNameResp in varchar2,
  OperationType in varchar2,
  XMLmessage in varchar2) return varchar2
  like java language
  name 'ActiveMQRequest.Request (java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String) return java.lang.String ';
  
  
  and that is the release of JDeveloper
  
  Sending message. :
  < message >
  < header >
  SourceID < SourceID > < / SourceID >
  < > 11111111111 TransactionID < / TransactionID > < MeterID > VIEN < / MeterID > < REPID > 41679178 < / REPID > < TransactionDate > 2010 - 10 - 08T 02: 00:00 < / TransactionDate > < Sensus UserID > < / UserID > < customer CustomerID > < / CustomerID > < / header > < body > < StarDate > 2010 - 10-01 T 14: 00:00 < / StartDate > < EndDate > 2010 - 10 - 06 T 14: 00:00 < / EndDate > < IntervalFlag > Y < / IntervalFlag > < MeterFlag > Y < / MeterFlag > < / Body >
  
  JMSCorrelationID = ' ID:W05834007 - 3793-1286901259437 - 0:0:1:1:1'
  Message is received.
  Message received: < Message >
  < header >
  < > 11111111111 TransactionID < / TransactionID >
  SourceID < SourceID > < / SourceID >
  < / header >
  < body >
  Acknowledge < TransactionStatus > < / TransactionStatus >
  < TransactionMessage > interval indicator null is not o or N < / TransactionMessage >
  < / body >
  < / message > '
  Result: < Message >
  < header >
  < > 4444444444444444 TransactionID < / TransactionID >
  < SourceID > NRT < / SourceID >
  < / header >
  < body >
  Acknowledge < TransactionStatus > < / TransactionStatus >
  < TransactionMessage > interval indicator null is not o or N < / TransactionMessage >
  < / body >
  < / message >
  
  
  When I run in Oracle Sqldeveloper output has been
  
  Error: JMS Exception occurred to create a queue of connection: javax.jms.JMSException: not able to create transport. Reason: java.io.IOException: schema of Transport NOT recognized: [tcp]
  
  
  Do you know what I'm doing in the configuration of Oracle 11 g 2 to do this work. I would appreciate your help.
  
  Thank you

  Do you have activemq.jar or activemq-Core loadjava in the database with your class? Looks like some ActiveMQ classes lack.

• The Alpha channel is recognized in a motion Menu?

  I am trying to use a video from Digital Juice as my animated menu background, but the alpha channel is not recognized.  It shows the black color instead of transparency.  I am compiling in the form of Quicktime with Alpha movie.

  Any help would be greatly appreciated.

  Thank you.

  Dave

  Lol you can use a background of movement or the background in the Menu of Photoshop, you can't use both. If you use a background of movement, the Photoshop Menu background is replaced by the video motion, and the buttons are rendered above it.

• iTunes not recognizing iphone

  Hey guys, last updated itunes is not recognizing my iphone.

  Uninstalled and reinstalled iTunes several times, everything is up to date. I also tried the thing of driver device manager update, but the apple usb driver is not present even after I have reinstall and uninstall iTunes, all solutions? p.s Also running windows 10.

  Hello, you should see this article, it will help you If iTunes does not your iPad, iPhone or iPod - Apple Support

• My IPhone 6 is not recognized by my IMac

  My IPhone 6 is not recognized by my IMac

  What operating system do you use? If you mean that it is not recognized by iTunes and you use 10.7 as your profile is displayed, you will need to upgrade your operating system to get the latest version of iTunes.

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Updated itunes 12.5.1 and iPhone not recognized now

  I upgraded to itunes 12.5.1 and now my itunes does not recognize my iphone when it's connected.  I have a new laptop with Windows 10.  Can anyone help please?  I want to save my phone before I upgarde to the new iphone 10.0 software.  Thank you!

  Hey cbaron12,

  Thank you for being a part of the communities of Apple Support.

  I understand that your iPhone is not recognized in iTunes on your Windows PC.  It of a good idea to always backup your iPhone, so in order to get this problem solved, please follow the steps in the link below.

  If iTunes does not recognize your iPhone, iPad, or iPod

  See you soon.

• iPhone, iPad Air 2 not recognized by iTunes

  Very frustrated right now. Given that Apple's Support is not in contact with return despite requests, the story will go here. I have Windows 10, iPhone 6 + and iPad Air 2. Last weekend I was invited to and did pass to iTunes 12.5.1.21. Plugged my iPhone 6 +. Not recognized by iTunes; 'sync' gray. Tried the same thing with my iPad 2 Air. Same result. I get no error message.  Here are my troubleshooting - what I'm missing, Apple?

  1. Lightning card Checked, works fine with other devices.
  2. Rebooted PC.
  3. Rebooted IPhone.
  4. Restarted iPad Air 2.
  5. I've tried different start up sequences (start iTunes connect manually; first)
  6. Went to 'Upgrade device via Device Manager' - these devices are working properly.
  7. Updated my iPhone and iPad 2 air for iOS 10 successfully.
  8. Apple email support; 48 hours later they gave me another email address for contact.
  9. Chose the Contact Apple Support via phone option - screen "we will call you - your phone will ring at any time.  Still waiting for the phone to ring.
  10. From Discussions on Apple's site with troubleshooting tips, have tried all suggestions with no luck - If iTunes does not recognize your iPhone, iPad or iPod - Apple Support.
  11. I even opened and closed the blinds completely throughout my house to see if that would help.  Go figure.
  12. The last resort on them, says "Contact Apple support" - see #9 above.  Twice.

  Apple-Support - What should I do at this point?  I'm all ears, and Android is looking better and better during my next upgrade.

  Happy to report that I finally found a position that has fixed this. Someone has to give Community contributor turingtest2 a price, they had an incredible post in communities that have corrected my problem.  See below for the excellent suggestions.

  iOS device do not show in iTunes for Windows

  iOS device do not show in iTunes for Windows

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2