Chapter numbers automatic for chapters within a single document

Similar Questions

• Excluding the chapters of automatic chapter numbering

  

  Hi guys, first time poster!

  I need help.

  I've set up each of my chapters with automatic chapter headings (Type > text Variables > insert Variable > chapter number)

  So that part works fine.

  
  The problem I have is (as you can see in my screenshot), for my books, Chapter 1 begins in the 7th entry on the book panel. So, instead, Chapter 1 to 7, the chapter number. I'm doing this right? I can't find a solution. Must file as a table of contents and pages copyright etc is not in the compilation of the book? I want to export an entire PDF (what I know how to do) rather than having to connect a PDF file. I checked the "Document numbering Options" and under chapter numbering I don't see really an option to exclude the first entries of 4 or 5 and do the 7th in the list "Chapter 1".

  Any ideas?

  Thank you very much!

  

  The lower part of this Panel is for the chapters of the Document

  You can see you have configured automatic chapter numbers

  For Chapter 1, you should have

  You must choose whether to start chapter numbering in chapter: 1

  Then in your previous documents before

  You must configure them so that they start numbering in Chapter 1 of too - but use a different numbering style as A, B, C, etc..

  Or anything that works for you.

  Bottom line is you need to select first chapter in the book and start the numbering of Chapter 1.

• Numbers automatically selects the "date format" for cells.

  Numbers automatically format selects 'date' of certain cells.

  I need "numbers."

  I want to calculate simple interest due on the amount, the interest rate and number of days.

  When I input "number" format of the result cell and calculate the amount * rate * number of days divided by 365 always automatically shows something unwanted and the format "date." Furthermore, I'm not able to change the AutoFormat ("date") in "number".  How to bypass this automatic selection?

  Thanks in advance

  UbiUbu

  Maybe you can share what, exactly, you enter in a cell.  A screenshot is also useful.

  

  Here's a way to do what I think you want:

  Enter amounts in cells B1, B2 and B3

  Select cell B6, and type (or copy and paste it here) the formula:

  =B2*B3*B1/365.25/100

  shortcut for this is:

  B6=B2*B3*B1/365.25/100

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• Creation of captions with chapter numbers

  Redesign of our guides and we trying to create captions for our figures and tables that include the chapter number as the figure is (i.e. Figure 3.5). The problem is that we do not use the book feature; each of our guides is contained in a single document, because some of our chapters are so short that it seemed unnecessary to place each in their own document. I know that if each chapter has its own document, we could create a paragraph style numbered list with a number as a Figure ^ H. ^ #. Is it possible to reproduce without real, separate document chapters? Up to this point, we had a separate paragraph for each chapter style (Figure 1. ^ #, Figure 5. ^ #, etc.), but some of our guides have received more time than we expected and which becomes more and more annoying. Any suggestions would be greatly appreciated. We use CS5.

  emilynelson wrote:

  Redesign of our guides and we trying to create captions for our figures and tables that include the chapter number as the figure is (i.e. Figure 3.5). The problem is that we do not use the book feature; each of our guides is contained in a single document, because some of our chapters are so short that it seemed unnecessary to place each in their own document. I know that if each chapter has its own document, we could create a paragraph style numbered list with a number as a Figure ^ H. ^ #. Is it possible to reproduce without real, separate document chapters? Up to this point, we had a separate paragraph for each chapter style (Figure 1. ^ #, Figure 5. ^ #, etc.), but some of our guides have received more time than we expected and which becomes more and more annoying. Any suggestions would be greatly appreciated. We use CS5.

  Review your document guide just like a list of several levels, as a plan, with chapter, section, paragraph, text, figure and styles of paragraphs in table. Number of any levels are important, such as chapter and figure. Set the styles of paragraph to continue numbers across stories and restart figures and tables after the previous levels. The number format for the paragraph style figure must begin with the text "Figure" followed by a space reserved for the chapter-level number, number then '. ', the space reserved for the paragraph in figure style.

  Google search for words such as 'tutorial InDesign multilevel numbered list' without the quotes for the good info.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• InDesign CC: Numbering not updated chapters

  I read this...

  http://forums.Adobe.com/message/5536663

  And determined that I have could be faced with a similar problem. I have two different templates.

  Master A - chapter Pages - I use for the chapter title pages where the margins are slightly different. It is also the number of the corresponding chapter to disaplyed.

  Master B - body Pages - this is where I have the copy of body of my chapters. for example H2 hollow H6, standard paragraph, figure lists, references, etc.

  

  All my chapters are built this way. Including my annexes.

  Heres my book page numbering options...

  

  Each chapter is showing as "Insert here the title of Chapter 1.

  

  The chapter preceding is infact Chapter 2 deployment.

  This is the Style of the chapter number, or positions - chapter title (H1)

  You will see that I attributed a particular list for numbers to use. It was titled "Chapters" under lists.

  

  My question is...

  What happens becase I use two different text blocks in my Masters? You can see what my page .indd structure looks like in the screenshot of pages.

  My references figure take the chapter number, I guess because the chapter numbers are not updated. Is this true?

  How can I fix without having to redo the master-A pages or using a simple master page layout?

  Any help is ALWAYS appreciated and thanks for your time.

  Here's an idea of my book structure.

  

  Aaaaaaaaand I think that I fixed it...

  Steps to solve down

  

  

  

  I corrected the page options nubering for each document. Still nothing. Checked the substitutions and styles. Authorized Overrirdes. And that looked like, he had to start work and then I rememebered sometimes assignments may cause problems with numbers. Then I checked each document, erased again substitutions (manually... thank you Adobe for the actions Palette) so I ran chapter numbers all update and Pará, and... * Taaaaaa Daaaa * for this worked.

  Thank you all for your help and your patience so I worked through this. We have some people who work on the document, otherwise I would not have done assignemnts this early in the project.

  Thanks again.

  The possible sollutions are...

  1. Check your document page numbering options.
  2. Check your Styles and your lists.
  3. Make sure your models are "contuning to the previous" in the numbering section.
  4. Make sure you have your assignments checked or not related.
  5. Check that you have not applied for substitutions. If you erase them.
  6. Run "Update all numbers" or "chapter numbers and paragraph update" after you have everything checked.

  Thanks again!

• Numbers automatically linking data sets

  Hello

  I have problems with parts of the data sets are grouped automatically by numbers (3.5) when I don't want that to happen.

  I found that number is automatically grouping different sets of data in groups of six. For example, condition 7 is grouped with condition 1, condition 8 with condition 2 and so on. I initially found it frustrating, because when trying to make a data chart, terms of 7 and 1 colors are the same, like 8 and 2, 9 and 3 conditions and so on. But when you try to change the color of groups to distinguish them individually (really annoying for large sets of data), numbers automatically change the color of the corresponding group as well (i.e. groups 1 and 7 are both blue color, and to differentiate them, I change group 1 to black.) Group 7 then also instantly changes to black). It's extremely frustrating.

  Is there a default setting that I can change so that never conditions are combined unless I have specifically to group them? It seems really odd that this defect exists in the first place.

  Thanks in advance.

  It is difficult to view the problem from your description (a screenshot would help), but it seems you have trouble getting a graph to look right. You can try clicking on it, then the rectangle to change data references, then experiment with this change in the lower left corner of the window of numbers:

  

  SG

• For loop within a while loop

  I have for loop within a while loop... admission to the for loop N comes from the VI selection... the while loop I a condition essentially statement it stops just after to finish all the iteration in loop...

  Entrance to the N loop is bascially driven by a local variable... that's the problem Iam having:

  When I press the Start button to run the program... regardless of the output of the select VI is gives the N of the for loop, then the loop starts and then ends in place... and when the output of the select statement takes a different value (the N of the loop for) loop not work until I restart the program again... What can I do so that the for loop runs again for another value of N, the RUN program button is enabled.

  1. clean your diagram.  Style guides suggest keep the pattern of a single screen.  With a little effort, I was able to get your DB less than 1600 x 1000 pixels.

  2 then I can see (some) it happens all at once. This thing does nothing?

  3. local variables can lead to race conditions.  Output in Angle position may be a race condition, although is probably not what you wanted to do.  What does the wired local time at the moment present terminal meter? (Ooops! Two controls with the same name - which can be quite confusing as well!)  If you need or want two components of façade having the same text, use the legends.  Make the labels is different so the comic is more readable.

  4. having more than one Dequeue function on the same queue will lead to unpredictable results.  When an item is removed, it is removed from the queue and is not accessible to any other Dequeue function.  In parallel loops, you have no way of guessing which Dequeue will seize any particular element.

  5 use Boolean reverse instead of Select with wired False to true and true cable at the entrance to false entry. Better, just make the case of forgery in the structure of the case within the for loop the real deal. No required reversal.

  6. I was not looking for to determine the logic of the code within the structure of this case. It seems I could have posted a much simpler way to do this several weeks ago.

  7. use multiply from the Digital Palette rather than a node form multiply by 4 or 1.8. Uses less space BD and is much easier to read.

  8. as has been suggested, learn how to work the machine architecture and the State of producer/consumer.  They can make your life much easier.  Do not try to convert immediately to these models.   It's too much bite to at some point.  Learn how they work first.  Make a few simple examples.  Then rewrite this program in this format.  Probably faster than fixing what you have now.

  Lynn

• Is it possible, both within a single segment dhcp servers?

  1 segment 2 dhcp server? It's possibe?

  It is possible, two within a single segment dhcp servers?

  and what about dhcpv4 may provide the client with ipv6? There is a possibility?

  I hope you help...

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope that helps.

• Chapter numbers will appear in the table of contents with page numbers...

  First of all, thank you all so much for the display of the answers.  This forum is wonderful.

  I have a doc that needs to have chapter numbers appear with the page numbers in the table of contents.

  I insert the < $chapnum > and < $currentpagenum > in the footer and I get 1-1 appears.

  To include 1-1 in the table of contents, do I have to edit the referring Page, or is there another way.

  Thank you very much for your help!

  Change the reference to the table of contents page to use the building block as well as the first page, which is <$chapnum>chapnum.<$pagenum>

• How to choose chapter numbers in table of contents headers?

  Each new chapter title is in a table of one row and two columns. Column 1 contains only a large number (numbered style called ChapNum) against a shaded background and column 2 (shaded) contains the title of the chapter (Heading1 - which is NOT numbered; only the style of column 1 contains numbering.)

  The only exceptions are the Preface (a title 1) chapter and the table of contents itself (which uses TOCTitle so it will not appear in the table of contents). For both, the shaded column 1 uses a style called ChapNoNum.

  Layout a sideheads. first page of each numbered chapter looks like this:

  |-----|--------------------------|
  |     |                          |
  | 1   | Heading1.
  |-----|--------------------------|
  |     | text text text text text |
  |     | text text text text text |
  |     | text text text text text |

  |     | text text text text text |
  ----------------------------------

  I want the table of contents to pick up numbers chapter as follows:

  |-----|--------------------------|
  |     |                          |
  |     | TABLE OF CONTENTS |
  |-----|--------------------------|
  |     | Preface... 1.
  |     | 1 getting started... 3.
  |     | 2. more things... 5.
  |     | 3 troubleshooting... 9.

  ----------------------------------

  But the table of contents contains only the Heading1s, which are not numbered. How to include the ChapNum in front of the title 1 in the table of contents? (I tried to use graphical boxes on master pages, instead of the rows in the table on the page body, but have not found the answer it.)

  Any help is welcome.

  Gay (9.0, unstructured FM)

  Gay Alston wrote:

  Each new chapter title is in a table of one row and two columns. Column 1 contains only a large number (numbered style called ChapNum) against a shaded background and column 2 (shaded) contains the title of the chapter (Heading1 - which is NOT numbered; only the style of column 1 contains numbering.)

  The only exceptions are the Preface (a title 1) chapter and the table of contents itself (which uses TOCTitle so it will not appear in the table of contents). For both, the shaded column 1 uses a style called ChapNoNum.

  Layout a sideheads. first page of each numbered chapter looks like this:

  |-----|--------------------------|
  |     |                          |
  | 1   | Heading1.
  |-----|--------------------------|
  |     | text text text text text |
  |     | text text text text text |
  |     | text text text text text |

  |     | text text text text text |
  ----------------------------------

  I want the table of contents to pick up numbers chapter as follows:

  |-----|--------------------------|
  |     |                          |
  |     | TABLE OF CONTENTS |
  |-----|--------------------------|
  |     | Preface... 1.
  |     | 1 getting started... 3.
  |     | 2. more things... 5.
  |     | 3 troubleshooting... 9.

  ----------------------------------

  But the table of contents contains only the Heading1s, which are not numbered. How to include the ChapNum in front of the title 1 in the table of contents? (I tried to use graphical boxes on master pages, instead of the rows in the table on the page body, but have not found the answer it.)

  Any help is welcome.

  Gay (9.0, unstructured FM)

  Table of contents specified only captures paragraph formats. Chapter numbers are not specified in the table of contents, so they are not captured. To capture the number and paragraphs of title, you must specify both formats in implementing TOC. For race number in the title, you must assign a paragraph format in the entrance of the number in the table of contents; This will cause the title to the number on the same line.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

     

• How can I get rid of chapter numbers in a book?

  Chapter numbering options (under layout / numbering and Section Options) do not include "no numbering. When I import a file for a chapter by using the function of the Place to load in a Word doc, '1.' text appears on the line of eheader th.

  I tried to go to the Type / text Variables / defines the location and the removal of the text chapter number variable. However, when I Place a Word doc in my book, the chapter number usually appears at the beginning of the chapter, and then I can't make it go away.

  Help gratefully received.

  You have to work pretty hard to use the assigned chapter number by ID. The usual method is to insert a chapter number variable in a block of text. Place a Word document would not invoke it. It seems to me that the chapter number is included in the Word file, which makes some sense from the point of view of the author and should be selectable as any other text in the document.

• Is there away to chapter numbers GREP of the text to the alpha numerials?

  We must change the numbers of chapter of the text to a number.  For example: 1 to 1. We tried a few Greps but not worked so far. We can find the words but we have hung up to change it to a number. If someone could give us some suggestions that would be great.

  The GREP will find the numbers without the (?)<=chapter), but="" it="" will="" also="" find="" any="" number,="" which="" probably="" isn't="" what="" you="" need.="" but="" your="" chapter="" numbers="" probably="" have="" a="" paragraph="" style="">

  Scott from a script idea is good, but I don't know how to create one, so I tend to follow the manual way (one day I'll get a few scripts...). Scott is the numbers of thought in words, or he would have probably thought of this...

  Could replace all instances of numbers with variable text word?

  Create a text variable for the number of chapter and in your GREP

  Search:? (((twenty)? |)) (30)? (forty)? (fifty)? (60)? (seventy)? (eighty)? (90))?) ? (\1)one|two|three|four|five|six|seven|eight|nine|ten|eleven|twelve|thirteen|fo urteen |) Fifteen | Sixteen | Seventeen | Eighteen | Nineteen)

  {Replace: \x{0018} (it can be different, so copy / paste your first)

  Find format: regardless of your style of paragraph for the chapter number is

  If your items are set up and in order, it should replace all by the correct number.

• Firefox opens automatically even when files 'This automatically for files like this' is checked

  http://i.imgur.com/xbcCI97.PNG

  I ticked the box of "do this automatically" for Word document files (and other types of files) a long time ago, but Firefox still displays this dialog box asking what I want to do with the file.

  How can I fix?

  Thank you.

  Sometimes, the site sends erroneous information about a file.

  InlineDisposition 2 {web link}
  InlineDisposition 2 amends the provision of Content-Disposition
  the response of the Inline attachment headers.